• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.240-247
• /
• 2010

The soil nailing system is becoming common as reinforcement method of slope face in soil. It has application to obtain slope stability method and scaffolding system. It has some troubles when the soil nailing system is applied to the downtown because it could be invaded someone's private area. Thus, in this paper, wedge type removable soil nailing system which can easily remove deformed bar in final excavation step is developed. Field pull-out test is performed to evaluate deformed bars removal and pullout resistance characteristics. According to this result, application of Wedge Type Removable Soil Nailing System is performed.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.71-76
• /
• 2010

The safety block which prevents drop of laborers at high altitude was analyzed by finite element method. Elastic analysis was done by Ansys ver. 11.0. and tetrahedral meshing was used. As load applied more vertically at the fixed face of saw tooth, the stress concentration became smaller and the load distributed broader. When load worked at saw tooth and the shape was more straight to the direction of load, most stresses except principal stress became smaller. When the area of the load increased, principal stress and equivalent stress could be decreased simultaneously. A principal stress and other various stresses occurred in 3D shape, therefore revised model which has smaller equivalent stress than other models shows excellence on the stability and the credibility.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.101-107
• /
• 2003

There exists a structural problem for link structures in the unstable state. The primary characteristics of this problem are in the existence of rigid body displacements without strain, and in the possibility of the introduction of prestressing to change an unstable state into a stable state. When we make local linearized incremental equations in order to obtain knowledge about these unstable structures, the determinant of the coefficient matrices is zero, so that we face a numerically unstable situation. This is similar to the situation in the stability problem. To avoid such a difficult situation, in this paper a simple and straightforward method was presented by means of the generalized inverse for the numerical analysis of stability problem.

• 경영과정보연구
• /
• 제20권
• /
• pp.17-32
• /
• 2007

We try to study the plan to deliver the message of the hope and common peoples are diligent and we can buy the real estate in work if we make efforts hard that relieve an real estate price and analyze a timex situation. If prepared the countermeasure in the government with many real estate policy with due to a short though countermeasure which is seen at one's face. The error to the people of the policy which does not do the staring gaze to tie. This paper to pursue the stability of an real estate price and analyze the price according to an real estate policy and lead an real estate policy for a residing stability of the common people. There are we even though we grope the method to actualize and protect a lease security according to a house lease law of protection.

• 화약ㆍ발파
• /
• 제39권3호
• /
• pp.35-43
• /
• 2021

사면의 최적화(slope optimization)는 오픈핏(open pit) 노천광산에서 사면의 경사를 높여 추가적인 광석을 채굴하고 최대한의 이익을 얻는 것이 그 목적이다. 대형 노천 광산들은 선진화된 기술을 도입하여 사면의 안정성을 확보할 수 있는 수준에서 광산의 사면을 높이려는 노력을 하고 있다. 본 기술보고에서는 사면 최적화의 동향과 실제 광산의 사례들을 소개하고자 한다.

• 수산경영론집
• /
• 제54권4호
• /
• pp.19-45
• /
• 2023

This study explores strategies to expand Korea's top 10 seafood export in the oversea market, with a specific focus on the impact of export concentration. For certain seafood items such as laver, crab, and mackerel, characterized by low export concentration, adopting a focused export expansion strategy is more effective. Conversely, highly concentrated seafood items such as toothfish, cod, pollack, and abalone face high risks in export performance due to their heavy reliance on a small number of key export countries. To ensure export stability, it is advisable to implement a diversified export expansion strategy for these highly concentrated seafood items. In the case of medium-concentration seafood items like tuna, oyster, and flounder, the decision between a concentrated or diversified strategy should be based on their specific export situations. Tailoring strategies to the distinctive market characteristics of each seafood item enables exporters to effectively increase oversea market share, promoting stability and sustained growth in export performance.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.3-16
• /
• 1999

본 논문은 새로 개발된 파괴형태를 고려한 암반사면의 신뢰도해석 모델의 검증을 위하여 예제를 통한 민감도해석을 수행하였고 그 결과를 수록하였다. 민감도분석에 이용된 매개변수는 암반 불연속면의 공학적 특성 (불연속면의 방향 및 강도),하중조건 및 암반사면의 기하학적 형상 등이다. 확률론적 해석에서 고려할 수 있는 불연속면의 방향 및 마찰각의 통계적 특성이 파괴형태를 고려한 암반사면의 안정에 큰 영향을 보였다. 암반사면의 안정은 굴착면의 방향에 가장 민감하였다. 예제분석을 통하여 개발된 파괴형태를 고려한 암반사면의 신뢰도모델은 암반사면의 안정성 조사에 성공적으로 적용할 수 있었다.

• 터널과지하공간
• /
• 제13권4호
• /
• pp.245-259
• /
• 2003

Refering to the articles "Squeezing rocks in tunnels(Barla, 1995)" and "Tunnelling under squeezing rock conditions(Barla 2002)" this article deals with technologies for design, stability analysis and construction of the tunnel being driven in the squeezing rock mass. The definition of this type of behavior was proposed by ISRM(1994). The identification and quantification of squeezing is given according to both the empirical and semi-empirical methods available to anticipate the potential of squeezing problems in tunnelling. Based on the experiences and lessons learned in recent years, the state of the art in modem construction methods was reported, when dealing with squeezing rock masses by either conventional or mechanical excavation methods. The closed-form solutions available for the analysis of the rock mass response during tunnel excavation are described in terms of the ground characteristic line and with reference to some elasto-plastic models for the given rock mass. Finally numerical methods were used for the simulation of different models and for design analysis of complex excavation and support systems, including three-dimensional conditions in order to quantify the influence of the advancing tunnel face to the deformation behavior of the tunnel.

• 복식문화연구
• /
• 제15권2호
• /
• pp.311-325
• /
• 2007

The purpose of this study is to investigate the effect of eyeshadow color(brown, purple), lipstick color(red, red purple, and yellow red), and lipstick tone(vivid, light, dull, and dark), clothing style(formal, casual), clothing tone(N9, N7, N4, N2) on image formation. Sets of stimulus and response scales(7 point semantic) were used as experimental materials. The stimuli were 128 color pictures manipulated with the combination of eyeshadow color, lipstick color, lipstick tone, clothing style, and clothing tone using computer simulation. The subjects were 768 female undergraduates living in Gyeongnam-do. Image factor of the stimulus was composed of 5 different components, attractiveness, stability, cuteness, visibility, and tenderness. In the 5 image components, clothing style and clothing tone showed independent effect. In the stability, cuteness and visibility, lipstick color showed independent effect. Eyeshadow color and lipstick tone influenced independently on the attractiveness, stability and visibility. In the coordination of achromatic clothing with makeup face, attractiveness image by the coordination of lipstick tone with clothing tone, cuteness image by the coordination of lipstick tone with clothing style or clothing style with clothing tone, visibility image can be produced by the coordination of eyeshadow color with lipstick color.

• 한국전기전자재료학회논문지
• /
• 제30권2호
• /
• pp.86-90
• /
• 2017

This work reports the phase-change behavior and thermal stability of doped GeSbTe/GeSbTe bilayers. We prepared the bilayers using RF sputtering, and annealed them at annealing temperature ranging from $100^{\circ}C$ to $400^{\circ}C$. The sheet resistance of the bilayer decreased and saturated with increasing annealing temperature, and the saturated value was close to that of pure GeSbTe film. The surface of the bilayer roughened at $400^{\circ}C$, which corresponds to the surface roughening of doped GeSbTe film. Mixed phases of face-centered cubic and hexagonal close-packed crystalline structures were identified in the bilayers annealed at elevated temperature. These results indicate that the phase-change behavior of the bilayer depends on the concurrent phase-transitions of the two GeSbTe-based films. The dopants in the doped GeSbTe film were diffused out at annealing temperatures of $300^{\circ}C$ or higher, which implies that the thermal stability of the bilayer should be considered for its application in phase-change electronic devices.