• 농업과학연구
• /
• 제47권2호
• /
• pp.327-335
• /
• 2020

The purpose of this study was to analyze the load distribution and contact safety factor for the power take off (PTO) gear of a 71 kW class agricultural tractor. In this study, a simulation model of the PTO gear-train was developed using Romax DESGINER. The face load factor and contact safety factor were calculated using ISO 6336:2006. The simulation time was set at 2,736 hours considering the lifetime of the tractor, and the simulation was performed for each PTO gear stage at the engine rated power conditions. As a result of the simulation, the face load factors for the driving gear at the PTO 1^st, 2^nd and 3^rd stages were 1.644, 1.632, and 1.341, respectively. The contact safety factors for the driving gear at the PTO 1^st, 2^nd and 3^rd stages were 1.185, 1.216, and 1.458, respectively. As the PTO gear stage was increased, the face load factor decreased, and the contact safety factor increased. The load distributions for all the PTO gears were concentrated to the right of the tooth width. This causes stress concentrations and shortens the lifespan of the gears. Therefore, it is necessary to improve the face load factor and the contact safety factor with macro-geometry and micro-geometry.

• 터널과지하공간
• /
• 제21권3호
• /
• pp.192-204
• /
• 2011

본 연구에서는 시공단계를 정확하게 고려하여 3차원 해석을 수행하고, 이와 동일한 결과를 나타내는 2차원 해석 결과를 얻고자 천단변위를 기준으로 하여 하중분배율을 결정하였다. 2차원 해석 결과와 3차원 해석 결과에서 천단변위의 총량에는 차이가 있어, 이를 극복하고자 각 단계에서의 천단변위 값을 총 변위량으로 나눈 '천단변위비'를 비교 대상으로 정하였다. 또한 숏벤치 공법이나 미니벤치 공법의 경우에서처럼 상하 반단면 분할굴착에서 벤치의 길이가 짧은 경우에는 하부 반단면의 굴착이 완료된 후에도 굴진면의 지지효과가 사라지지 않는 상황이 발생한다. 이러한 상황을 해석에 반영하고자 4번째 하중분배계수를 도입하여 굴진면 전진 효과를 구현하도록 하였다. 그 결과 전단면 굴착, 상하 반단면 분할굴착, 벤치 길이의 변화 및 초기 응력 상태 등을 고려한 다양한 경우에 대하여 합리적으로 하중분배율을 결정하는 방법을 제시하였다.

• 대한전기학회논문지
• /
• 제33권9호
• /
• pp.355-363
• /
• 1984

An ideal and an approximate eauivalent circuits of a face-mounted PZT piezoelectric transformer were introduced from the equivalent circuit taking into account the mechanical loss of a PZT piezoelectric disk vibrator. And several expressions for the resonant frequencies and for the voltage ratios were derived from the approximate circuit of the transformer. From the experiments on the vltage ratios regarding the frequency variation without load and on the load variation at resonant frequency, it was found that the voltage ratio increased with the increase of load resistance and decreased sharply with the slight deviation from the resonant frequency, and that no-load voltage ratio at the resonant frequency was proportional to the product of the mechanical quality factor and the square of the electromechanical coupling factor of the vibrator.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.65-76
• /
• 2017

This research investigated the vibration frequency of sandwich plate made of piezoelectric fiber reinforced composite core (PFRC) and face sheets of piezomagnetic materials. The effective electroelastic constants for PFRC materials are obtained by the micromechanical approach. The resting medium of sandwich plate is modeled by Pasternak foundation including normal and shear modulus. Besides, sandwich plate is subjected to linearly varying normal stresses that change by load factor. The coupled equations of motion are derived using first order shear deformation theory (FSDT) and energy method. These equations are solved by differential quadrature method (DQM) for simply supported boundary condition. A detailed numerical study is carried out based on piezoelectricity theory to indicate the significant effect of load factor, volume fraction of fibers, modulus of elastic foundation, core-to-face sheet thickness ratio and composite materials on dimensionless frequency of sandwich plate. These findings can be used to aerospace, building and automotive industries.

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.615-621
• /
• 2015

In this paper diamond wire cutting method has been proposed to cut the rock in the tunnel face. Diamond wire saw method could cut the rock from tunnel face with very minor vibration and noise. In this study rock cutting process has been simulated with FEM method by using LS-DYNA explicit non-linear finite element code. Normal load act as an prime factor when cutting the rock surface. For observing the effect of normal load on bead, several experiments has been conducted by varying normal loads on the bead. From each experiment, cutting rate has been calculated to compare the cutting rate with different load conditions. By increasing the normal load on bead, cutting rate increases drastically.

• 한국기계가공학회지
• /
• 제15권5호
• /
• pp.66-72
• /
• 2016

Gearboxes are mechanical components that transmit power by adjusting input and output speed and torque. Their design requirements include small size, light weight, and long lifespan. We have investigated the effects of carrier pinhole position error on the load sharing and load distribution characteristics of a planetary gear set with four planet gears. The simulation model for a simple planetary gear set was developed and verified by comparing analytical results with a putative model. Then, we derived the load sharing and load distribution characteristics under various pinhole position error conditions using the prototypical simulation model. The results showed that the mesh load factor and face load factor increased with the pinhole position error, which then influenced the safety factor for tooth bending strength and surface durability.

• 한국항공우주학회지
• /
• 제48권12호
• /
• pp.953-960
• /
• 2020

본 논문은 회전익기용 엔진 감속기 주 기어열의 기어 웹 형상 최적화에 대해 기술하였다. 최적화 목표는 총중량, 전달 오차, 정렬 오차, 치면 하중 분포 계수 값의 최소화로 설정하였으며, 기어의 웹 두께, 웹과 축의 연결 위치, 웹과 림의 연결 위치를 설계변수로 선정하였다. 최적화 과정에서 기어의 웹, 축, 림은 3D 캐드 모델로부터 유한요소 모델로 변환되었으며, 기어 해석 프로그램 MASTA에 입력되었다. 최적화 알고리즘은 NSGA-II를 사용하였다. 최적화 결과 주 기어열의 총중량, 전달 오차, 정렬 오차, 치면 하중 분포 계수 값은 모두 감소하였으며, 최대 응력도 안전한 수준으로 나타나서 전반적으로 기어 성능이 개선되었음을 확인하였다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.29-35
• /
• 2013

The pitch reducer consists of several planetary gearsets, and they should have good load distribution over gear tooth flank and load sharing among the planets to improve the durability. This work investigates how bearing internal clearances influence both the load distribution over the gear tooth flank and the planet load sharing. A whole system model is developed to analyze a pitch reducer. The model includes non-linear mesh stiffness of gears, non-linear stiffness of bearings. The results indicate that the face load factor and mesh load factor decrease, and the fatigue life of output shaft bearings increase as bearing internal clearances of output shaft decrease. Therefore, the internal clearance of output shaft bearing must be considered when designing the pitch reducer for wind turbines.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.44-53
• /
• 2021

As environmental issues have emerged worldwide, emission gas regulations have been strengthened. In the construction machinery sector, studies have been actively conducted to utilize the power source of electric motors owing to the increasing demand for zero emissions. In this study, the gear specifications of an electric axle for construction machinery were selected by considering the specifications of the motor, gear tooth contact pattern, and face load factor. The gear strength evaluation was performed at the system level using the simulation model. The bending and contact strength of the spiral bevel gears and the bending strength of the planetary gear set showed a safety factor of 1 or more. However, the contact strength of the planetary gear set showed a safety factor of 0.92. Conservative results were derived by performing the analysis under the rated load condition of the motor. However, the ratio of the equivalent torque to the rated torque of the motor was 45% or less, hence, it was determined that no difficulties should arise regarding the durability of the axle.

• 한국지반공학회지:지반
• /
• 제12권1호
• /
• pp.87-110
• /
• 1996

터널굴착시, 막장부근의 3차원 효과를 반영하기 위해 주로 경험적인 하중분담률 개념을 도입한 2차원 유한차분법 수치해석이 수행된다. 본 논문에서는 3차원 수치해석을 수행하고 그 해석 결과와 2차원 수치해석 결과를 비교함으로써 합리적인 하중분담률의 적용 가능성 및 막장 부근의 음력집중 문제를 규명하고자 하였다. 무지보 굴착길이, 초기지중응력, 지반종류, 단면크기와 터널심도등의 하중분담률에 주된 영향을 미치는 인자들에 대한 매개변수 연구를 수행하고, 그 결과를 토대로 서울지하철의 대표적인 단면에 대해 적용가능한 하중분담률을 추천하였다.