• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.8
• /
• pp.1430-1435
• /
• 2016

Electrical impedance tomography (EIT) has been applied to measure the location of external disturbance using a phantom and conductive yarns. According to the test results, the addition of carbon nanotube particles into the phantom does not show remarkable improvement in location errors. On the other hand combined fabric, conductive yarns with fabric, and non-woven fabric, were added to evaluate its performance as a fabric sensor. The combined fabric resulted in a decrease of 21.5% in the circumferential location error and a decrease of 50% in the radial location error, compared to those of the yarns. Additionally, it was revealed that the measurement error is almost linearly proportional to the conductivity of the phantom liquid and resistance of the conductive yarns. The combined fabric can be a promising material for fabric sensors in sports utilities and medical devices.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.46-55
• /
• 2021

Seam puckering and the seam strength of conductive threads used to produce smart clothing were analyzed according to stitching methods and fabrics. Samples were prepared in a lock stitch and zigzag stitch on plain woven and jersey knit fabric, using one type of polyester sewing thread and three types of commercial conductive threads that consisted of two types of stainless-steel conductive threads (TST and MST) and one type of silver conductive thread (SSV). Seam pucker percentages, shapes, and seam strength were measured. On plain woven fabric as well as jersey knit fabric, three-ply TST and MST showed a higher SP percentage compared to a polyester sewing thread. Meanwhile, single-ply SSV showed the lowest SP percentage. In addition, the SP percentage of the zigzag stitch decreased along the weft and course directions of the fabric, and decreased significantly as the number of fabric layers increased. Moreover, there was a marked tendency for a higher SP percentage in jersey knit fabric compared to plain woven fabric, and the two-dimensional cross-section waveforms of stitches obtained using three-dimensional data that showed increased irregular waveforms and peaks in the zigzag stitch. There were no correlations between seam strength and tensile strength.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.511-527
• /
• 2024

The aim of this study was to impart color to bacterial cellulose (BC) fabric using various natural plant-based dyes-namely, gardenia jasminoides, green tea, and pomegranate peel. A protein pretreatment was also applied to improve the BC fabric's dyeability and mechanical properties. The BC fabric's dyeing and mordanting conditions when using plant-based natural dyes were determined by changes in the K/S values. The dyeability of BC samples dyed with green tea or pomegranate peel improved when they were pretreated with soy protein isolate (SPI) prior to dyeing. Moreover, the SPI pretreatment was efficient in improving the BC fabric's tensile strength and flexibility. This study proposes a method for dyeing BC fabric that uses plant-based natural dyes and confirms the effects of the protein pretreatment on the fabric's dyeability and durability.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1683-1689
• /
• 2006

Precedent researches on lyocell are mostly on lyocell structure, characteristics, physical properties by finishing and dyeability, and the like; there are little cases of researches on interlining for lyocell clothes production. To serve as a base information helpful to select fusible interlining and improve the efficiency of sewing process considering the characteristics of lyocell, this study performed t-est, F-test toward to the difference in the appearance-related properties and the mechanical properties of lyocell-interlining bonded fabric in accordance with the characteristics of fusible interlining and lyocell face fabric. This study reached following conclusions. Drapability and Crease recovery of lyocell-interlining bonded fabric are influenced by the structure of fusible interlining; stiffness of lyocell-interlining bonded fabric, by the structure of fusible interlining and the yam number of lyocell face fabric. WT is influenced by the mixture rate and yam number of lyocell face fabric. RT is influenced by the yam number of lyocell face fabric; G, 2HG, 2HG5, by the structure(woven and non-woven) of fusible interlining; B, HB, by the weight, structure(woven and non-woven) of fusible interlining, and yam number of lyocell face fabric; WC, by the weight, structure of fusible interlining; RC, by the structure of fusible interlining; thickness, by the weight of fusible interlining and the yarn number of lyocell face fabric; weight, by mixture rate and yam number of lyocell face fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.7 no.2
• /
• pp.19-25
• /
• 1983

The purpose of this study was to investigate the effects of laundry variables and additives on the removal of deposited calcium on the cotton fabric. Samples of calcium deposited fabric was made by treating fabric with $CaC1_2$ and $Na_2CO_3$ solution subsequently. The experimental variables were: 1) NaOH concentration ($0.0001\%$, $0.0005\%$, $0.001\%$, $0.005\%$, $0.01\%$) 2) Alkaline builders(sodium carbonate, sodium meta silicate) 3) Sequestering agents(STPP and EDTA concentration: $0.02\%$, $0.04\%$, $0.06\%$, $0.08\%$, $0.1\%$, $0.15\%$, $0.2\%$) 4) Temperatures($25\pm1^{\circ}C$, $40\pm1^{\circ}C$, $60\pm1^{\circ}C$) 5) Edge-abrasion to the removal of deposited calcium on the cotton fabric. The fabric was washed for 15 minutes in a washing machine(Model: Gold Star WP-3007) or Launder-0-meter(40$\~$45 r.p.m., Toyo Rika Instrument Inc.) and rinsed 3 times per every rinsing time. The amount of calcium deposits on the fabrics was determined by EDTA-back titration methods and edge-abrasion was evaluated by ASTM D 3886 method. The results of this study were as follows: 1) pH of surfactant solution(NaOH concentration) did not influence on the removal of deposited calcium on the cotton fabric. 2) Added alkaline builders did not influence on the removal of deposited calcium on the cotton fabric. 3) It was shown that STPP and EDTA were effective to remove deposited calcium. The removal of deposited calcium on the cotton fabric was proportionally increased with increasing concentration of STPP and EDTA. At high concentration, however, the rate was rather decreased with increasing concentration. 4) The temperature of washing solution did not influence on the removal of dedosited calcium on the cotton fabric. 5) As the removal of deposited calcium on the cotton fabric was increased, the rate of edge-abrasion of the fabric was gradually increased.

• Korean Journal of Plant Resources
• /
• v.13 no.2
• /
• pp.111-117
• /
• 2000

In an attempt to select grape bag, which elevates grape quality and make easy maturation period determination, the following research was carried out at Chungbuk Institute of Agricultural Technology, Grape Experiment Station. Light transmittance rate of bag reached to 11-65% with non-woven fabric and non-dripped vinyl bags. Non-dripped vinyl perforation and white painting bag resulted in 50 and 75%, respectively. Berry weights in non-woven fabric and non-dripped vinyl bag were high than that in paper bag. Non-dripped vinyl perforation 50%, white painting bag brought into fruit cracking, shattering, and rotten fruit, making the investigation difficult. Maturation period preceded about 1-4 day with non-woven fabric and non-dripped vinyl compared with that in paper bag. Soluble solids content with non-woven fabric and non-dripped vinyl bags was high and acidity showed a reverse result. Coloring extent was developed rapidly with non-woven fabric and non-dripped vinyl than paper bag. During initial state of coloring, coloring was rapid with Maekban-Stone mixed non-woven fabric and non-dripped vinyl + non-woven fabric bag. This was rapid with non-woven fabric bag as long appropriate maturation period. Abnormal berry rate was 5.4-7.0% with paper and non-woven fabric bags but brought about as much as 16.6-100% with non-dripped vinyl and it's mixed bags. Appearance quality was the best with index 9.0 for non-woven fabric bag. Maekban-Stone mixed non-woven fabric but non-dripped vinyl performance 50% white painting bag was the least, showing index 1.0. The time consumed for maturation determination was reduced to 74-93% with non-woven fabric and non-dripped vinyl bag compared with 17.4h/10a with paper bag.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.2
• /
• pp.277-302
• /
• 1996

The overall performance of BISDN depends significantly on the interconnection network or the switch fabric. Hence, it is extremely important to evaluate the performance of the network or the fabric. The well developed performance models also provide insight into the factors that determine design tradeoffs as well as quantitative estimates of their importance. The objective of this paper is to investigate and critically compare all the developed performance analysis models of FPS according to internal switch fabric structure, traffic assumptions, performance measures, methodologies, etc. FPSs are described according to their internal fabric structure. Brief history of FPS performance analysis is mentioned and performance analysis modeling is discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.09a
• /
• pp.81-92
• /
• 2000

Green Slope(F.F.R : Fabric Form Reinforcement Method) is one of an environmental slope protection method at steep cutting sites. This method is that soil and rock at the steep slope is fixed using the environmental Fabric Form, Nail, Rock Bolt and Rock Anchor, And then, the surfaces covered with grasses or weeds. This method will be satisfied both safe slope protection and natural environment appearance. Green Slope is a useful method of the construction sites of steep cutting slopes.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.79-84
• /
• 2006

This paper deals with the grey fabric deformation during relaxation. It investigates the effect of twist direction and twist liveliness on the 2/2 twill weave woven fabric distortion, during relaxation This experimental work shows that twist liveliness increases the natural tendency of the twill weave woven fabric to skew. In addition when the twist direction of the warp and weft is opposite to each other the bias curling occurs too.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.47-48
• /
• 2008

New scouring agent which was stable up to 50% NaOH 350g/l has been developed for simultaneous CPB/silket treatment of N/C union fabric. The physical and dyeing properties of N/C union fabric treated with new scouring agent were measured. Fabric scoured and Mercerized by one bath CPB/silket process showed almost the same degree of Mercerization and K/S value with two bath process.