• Textile Coloration and Finishing
• /
• v.10 no.4
• /
• pp.30-36
• /
• 1998

The need for the effective flame retardant finishing for synthetic fiber Is required. This paper is focussed on the analysis of physical properties of nylon 6 fabric treated with tris(2-chloroethyl) phosphate(TCEP) in comparision with the untreated fabric. In order to evaluate the flame retardance effect, limiting oxygen index and burn rate were determined. Above 20% add-on of TCEP on nylon 6 fabric, reasonable flame retardancy was observed. Thermal stability of the treated nylon 6 fabric was evaluated by TGA. It seems that TCEP acts via a condensed phase mechanism. Tenacity and moisture regain of the treated fabrics were not changed and washfastness of those was excellent.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.103-104
• /
• 2008

Radio-frequency(RF) weldable polyurethane-coated fabric was prepared by knife coating of presetted and cire-finished nylon fabric using optimized coating formulation including RF-sensitive commercial polyurethane resins. The physical properties, adhesion strength, peeling strength, abrasion strength, flexibility, and hydrostatic water resistance of the prepared coated fabric were good enough to show no significant difference with regular coating. Additionally the prepared coated fabric had silky and soft touch without tackiness.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.290-294
• /
• 1998

Colour tone, lustre, surface roughness of fabrics are very important factors in pursue of the beauty of external appearance, namely aesthetic appearance, and the dynamic functionality of fabric used to clothe the human body. Drape is one of many factors that influence the aesthetic appearance of fabric and has an outstanding effect on the formal beauty of fabric. For this reason, the measurement and understanding of drape is required to specify the performance of fabric used in clothing. (omitted)

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.4
• /
• pp.584-592
• /
• 1999

Highly conductive polyaniline(PAn)-nylon 6 composite fabric was prepared by immersing the nylon 6 fabric in 0.5M aniline+0.35M HCl aqueous solution at 4$0^{\circ}C$ for 2hours, Polymerization was then followed by mixing the prepared oxidant and dopant solution(0.5M(NH4)2S2O+0.35M HCl) to the diffusion bath at 5$^{\circ}C$ for 30 minutes. The conductivity of prepared PAn-nylon 6 composite fabrics reached as high as 0.5$\times$10-1S/cm. Their conductivity were significantly affected by the aniline and oxidant concentration. As compared to those of nylon 6 fabric heat of fusion melting point the degree of crystallinity and tensile strength of PAn-nylon 6 did not significantly changed by inclusion of PAn. In the aspect of serviceability wheras the fabric conductivity was significantly decreased after multiple washion no significant changes in the fabric conductivity were observed after abrading the composite fabric over 50 cycles. However we found that the fabric conductivity could be recovered by acid re-doping with HCl.

• The Research Journal of the Costume Culture
• /
• v.20 no.4
• /
• pp.594-603
• /
• 2012

This study aimed to investigate a bias pattern making method with geometrical approach. The bias-cut dress has soft silhouette of drape in the garment. However, the bias cut dress has problem of satisfying the intended garment size spec. This problem occurs from various sources. The main reason is that the bias-cut fabric tends to stretch on longitudinal direction and to shrink horizontal direction when it was hung on the body. The goal of this study was to develop a bias-cut dress pattern making method satisfying the intended garment size spec. The researchers developed the geometrical method of measuring dimensional change by calculating the compensation ratio of the fabric in true bias direction. The compensation ratio was calculated by applying draping ratio of the fabric. Three types of fabrics were used in the experiment. The warp and weft crossing angle of fabric was ranged from $78^{\circ}$ to $82^{\circ}$. The fabrics stretched longitudinally 6.9~9.9% and shrank horizontally 7.2~11.0%. The compensation ratio of the bias-cut pattern for sample dress was calculated for each fabric type. Two types of experimental bias-cut dress patterns were developed for each fabric. One pattern was made with applying full compensation ratio and the other one made with applying partial ratio of the fabric. Experimental dresses were made with these patterns. The results of the evaluation showed that the bias-cut dress pattern applying the partial compensation ratio was more appropriate than the pattern applying the full compensation ratio.

• Journal of Fashion Business
• /
• v.19 no.6
• /
• pp.28-41
• /
• 2015

Properties of textile fabrics influence the appearance, aesthetics, and performance of garment. Drape and related properties of fabrics affect profoundly the static and dynamic appearance during wearer's movement. The three dimensional shape of the folded structure often deforms with time or with subtle vibration around the fabric specimen during the drape measurement. Due to the uneven and complex nature of fabrics, the overall shape of the fabric specimen on the drape tester often becomes unstable. There is a need to understand the fundamental mechanisms of how draping may generate pleasing forms. Two drape test methods, conventional Cusick drape test, and in-built drape tester, based on a depth camera, are compared. Fabric specimens including cotton, linen, silk, wool, polyester, and rayon are investigated for the fabric drape and other physical/mechanical parameters. Drape coefficient values of fabric specimens are compared based on the final drape images, together with the intermediate 3D drape images of the specimens during elevation process of the drape tester equipped with a stepper motor system. The correlation coefficient between the data based on the two methods is reasonably high. Another advantage from the depth camera system is that it allows further analysis of three-dimensional information regarding the fabric drape shape, including the shape of nodes or crest and trough.

• Textile Coloration and Finishing
• /
• v.17 no.3 s.82
• /
• pp.16-25
• /
• 2005

In this research, we investigated hydrolysis of the ester crosslinking on cotton fabric treated with polymer of maleic acid(PMA), citric acid(CA) and combination of polymer of maleic acid and citric acid using Fourier transform infrared spectroscophy. The rate of hydrolysis of the ester crosslinkage increased with pH regardless of the type of polycarboxylic acid used and even after hydrolysis for 256 hour in pH 13_4 solution, the treated fabric retained $10-20\%$ ester crosslinkage. The durability to alkaline hydrolysis of the ester crosslinkage formed by CA was lower than that of by PMA and combination of poly(maleic acid) and citric acid indicating that the ester formed by CA on the cotton fabric is more susceptible to hydrolysis than that formed by PMA and combination of PMA and CA. The total amount of ester and polycarboxylic acid molecules removed from fabric increased with increasing hydrolysis time but the rate of hydrolysis of ester linkage were higher than that of removal of polycarboxylic acid molecule from the fabric. The characteristic of hydrolysis of fabric treated with combination of PMA and CA was related with the mixing ratio of PMA and CA in treating fabric.

• Journal of the Korean Society of Costume
• /
• v.58 no.4
• /
• pp.26-34
• /
• 2008

The purpose of this study was to create a database of information on the mechanical properties of two different waterproof and breathable shell fabric groups(high density woven and PTFE laminate) used for outdoor apparel and to compare and correlate data of their mechanical properties and hand values. The results of this study were as follows; There were no statistically significant differences between two fabric groups in extension, bending and shearing properties. There were statistically significant differences between two fabric groups in MMD, SMD, LC and we values. High density woven fabrics had smoother surface than PTFE laminated fabrics. PTFE laminated fabrics can be compressed easily more than high density woven fabrics but their recovery after compression was not better than high density woven fabrics. There were statistically significant differences between two fabric groups in NUMERI, FUKURAMI. There was statistically significant difference between two fabric groups in total hand value. Total hand value and mean deviation of MIU had a very high and statistically significant negative correlation coefficient.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.626-634
• /
• 2017

This study investigated garment formability of the 73 breathable fabrics for sports-wear garment and their fabric mechanical properties were measured using KES-FB and FAST systems. Predicted garment formability from the mechanical properties measured using KES-FB and FAST systems was compared and discussed with fabric structural parameters. In addition, virtual 3D simulation silhouette by I-designer CAD system wear appearance by simulation using 3D CAD system. And compared with FAST finger chart by mechanical properties of FAST system. The correlation coefficients of extensibility and shear modulus between KES-FB and FAST systems were high, however, bending rigidity and compressibility showed relatively low correlation coefficients. The correlation coefficient of garment formability of breathable fabrics between KES-FB and FAST systems was 0.82. It revealed that garment formability can be predicted from fabric mechanical properties by KES-FB and FAST systems. The garment formability of nylon breathable fabric was higher than that of PET one, and the garment formability of laminated breathable fabric showed the highest value compared to coated, dot and hot melt laminated breathable fabrics. It revealed that garment formability of breathable fabrics for sports-wear can be predicted from fabric mechanical properties and garment formability was dependent on the materials, finishing method and fabric structural parameters.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.111-120
• /
• 2000

In order to make a silk-like polyester fabric, polyester fabrics were treated with a several weight reduction machines such as tank type, liquor flow type and C.D.R at the field condition. The results were as followings : The weft density of treated polyester fabric showed different tendency according to the used the weight reduction machine and the rate of weight loss. Namely, at 6.5% weight loss, the weft density of fabric treated with tank and liquor flow type increased by 1 pick/inch and 2 picks/inch, respectively, and decreased by 4 picks/inch in case of treated with C.D.R type. With the increase in the rate of weight loss, the air permeability of treated fabric increased, and the K/S value of dyed fabric decreased. The overall tendency of the air permeability and the K/S value of treated polyester fabric increased in the order of the tank type, liquor-flow type and C.D.R type. The tensile strength of polyester fabric treated with C.D.R had lower value than that of the other type. It is assumed that this result is attributed the decreasing of the cross point of the warp and weft direction.