• 한국의류학회지
• /
• 제23권1호
• /
• pp.22-29
• /
• 1999

This paper descrived the changes of peel strength wrinkle recovery and dimensional stability after fusing 4 different wool face fabrics with 3 different fusible interlinings. The fusing condition was conducted by fusing press machine under 4kg.f/cm2 at 15$0^{\circ}C$. To determine the effect of the varous physical properties of the fused fabrics face fabrics and interlinings on the peel strength wrinkle recovery and dimensional stability(hygral expansion and relaxation shrinkage) of fused fabrics correlation among the KES values of fused fabrics face fabrics and interlinings to the peel strength rinkle recovery and dimensional stability of fused fabrics were expeerimentally analyzed,. As the results the peel strength was mainly influenced by the cover factor of face fabric and interlinings. After fusing wrinkle recovery and hygral expansion were decreased. The cover factor wrinkle recovery weight thickness shear rigidity and frictional properties of face fabric and the thickness of fused fabrics were not influence to the wrinkle recovery of fused fabrics. In addition the dimensional stabilities of fused fabrics were mainly influenced by the tensile and frictional properties of the wrinkle recovery of fused fabrics. In addition the dimensional stabilities of fused fabrics were mainly influenced by the tensile and frictional properties of the face fabrics.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.59-66
• /
• 2009

The seven kinds of polyester fabrics having different fabric characteristics were investigated in terms of their dyeing levelness under various liquor ratios. The levelness was evaluated statistically from color strength obtained at different sections of each piece of dyed fabrics. The color strength data were analyzed using a exponential decay function of 3 parameters, $y=y_0+ae^{-bx}$. The b value of the function was used as a index of sensitiveness of dependence on liquor ratio of levelness. The index, b value, showed a linear proportional relationship to thickness of fabrics. Average unlevelness of dyeings exhibited a inverse proportional relationship to both weight and thickness of fabrics.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.98-103
• /
• 2003

The mechanical properties and failure mechanisms of through-the-thickness stitched plain weave glass fabric/polyurethane foam/epoxy composites were studied. Hybrid composites were fabricated using resin infusion process (RIP). Stitched sandwich composite increased drastically the flexural properties as compared with the unstitched fabrics. The breaking of stitching yarns was observed during the flexural test and this failure mode yielded relatively high flexural properties. Composites with stitched sandwich structure improved the mechanical properties with increasing the number of stitching yarns. From this study, it was concluded that proper combination of stitching density and types of stitching fiber is important factor for through-the-thickness stitched composite panels.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.573-580
• /
• 2005

Model I interlaminar fracture behaviors of the carbon/epoxy composite, one of the candidate composites for a tilting train carbody, were investigate by the use of DCB(Double cantilever beam) specimens. These specimens were made of CF3327 plain woven fabric with epoxy resin, and an artificial starter delamination was fabricated by inserting Teflon film with the thickness of $12.5{\mu}m$ of $25.0{\mu}m$ at the one end of the specimen. Mode I interlaminar fracture toughness was evaluated for the specimens with the different thickness of an inserter. Also delamination propagating behaviors and interlaminar fracture surface were examined through an ooptical travelling scope and a scanning electron microscope. We found that abruptly unstable crack propagation called as stick-slip phenomena was observed. In addition, interlaminar fracture behaviors were affected on the location and the morphology of a crack tip as well as an interface region.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.367-372
• /
• 1991

In this study, we discussed about the factors effected upon the initial maximum value of heat flux ($q_{max}$). Thermal conductivity, thermal transmittance and surface air cavity of wool fabrics were examind and their correlation to the $q_{max}$ was studied. The factors were examined which had an effect upon the $q_{max}$ of an objective measure of warm/cool feeling. It was simulated by Thermo-Labo apparatures. We selected twenty sorts of pure wool woven fabrics for men's fall -winter cloth (all Wool). The conclusions are as follows; 1. There was not a certain correlation between the $q_{max}$ and the thermal conductivity of wool fabric. 2. When the fabrics touched on the copper plates, the thickness of wool fabric had a negative correlation to the $q_{max}$. The thermal transmittance had a positive correlation. Both of them had a good correlation to the $q_{max}$. 3. As a major factor, the thickness of fabric effected on the $q_{max}$.

• 공업화학
• /
• 제9권5호
• /
• pp.715-718
• /
• 1998

본 연구에서는 수직섬유의 길이가 서로 다른 삼차원 유리직물을 보강재로 사용하고, 매트릭스 수지로 비스페놀 타입 비닐 에스테르 (bisphenol type vinyl ester)를 사용하여 hand lay-up을 이용해 복합재료 (3D composites)를 제조하였다. 삼차원 유리직물의 수직섬유의 길이가 복합재료의 기계적 물성에 미치는 영향을 three-point bending test, flatwise compression test를 통해 조사하였다. Short-beam test법 통하여 복합재료에서의 섬유와 매트릭스 수지간의 계면접착강도를 나타내는 층간 전단강도를 구하였다. 시험 결과를 통하여 수직섬유의 길이가 복합재료의 기계적 물성 및 층간 전단강도에 많은 영향을 미침을 알 수 있었다.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.269-279
• /
• 2021

In this study, the laminating of TPU film after coating of primer adhesive on the fabrics was applied in order to secure the strength to withstand a fall from a higher altitude by increasing the adhesion between the fabric and the film layer. It seems that the fineness of the yarn and the weave construction have a greater effect than the type of the laminating films. The order of superiority of the laminated fabrics by film type and thickness was the same for 1000 denier and 210 denier fabrics, and the tendency was consistent with the order of superiority in the film properties and peel strength tests. The tear strength of laminating fabrics increased three to four times for 1000 denier fabrics compared to the fabric alone, but it decreased by 2 times for the 210 denier fabrics. Summarizing the above results, it is most appropriate to combine 1000d fabric with three types of laminating films(100~200㎛ thickness) of A(0.2T) or B(0.15T) or D(0.1T) considering the air pressure resistance, the impact resistance during the fall, and the durability against damage during use.

• 한국의류학회지
• /
• 제26권2호
• /
• pp.193-204
• /
• 2002

Many fashion forecasting companies propose the fashion colors in every season. Modern fashion consumer respond to fashionable trends with utmost sensitivity. Therefore to satisfy the consumer with an trendy image, the fashion design must be found first, as image matters, followed by an analysis of each design element's effect on the total image composition. In previous studies of fashion image, has been discussed the positive correlation between fashion design elements of color, fabric, and form as the central issue. In this thesis, two of the fashion design elements, color and fabric are simultaneously considered to classify the image of fabric in fashion. For the color variables, 10 hues are selected from Munsell's system of color notation, and 12 tones from PCCS color notation., which are currently used in the domestic fashion industry. Texture variables used in this survey are classified by luster, prominence-depression of surface, thickness, and density of fabric. Graduate students from 20 to 50 years old and the specialists in fashion companies participated in the survey. The results of this survey are as follows: 1. The fashion fabric image is classified as 5 main images: 'elegant', 'comfortable', 'characteristic', 'light'and 'simple'. 2. The influence of hue, tone and texture is significant to the fashion fabric image. Following colors, yellow-red, red hues and light grayish, dark grayish tones convey the elegant image. The texture property for the elegant image is luster, thin and low density. Properties of fabric conveying the comfortable image are yellow-red and green-yellow hue, soft, light tones, matte and high density. Furthermore, hue turned out to be a insignificant variables for the unique image, whereas dark grayish, grayish tone, luster and prominent texture convey a unique image. For light image, properties of fabric are blue-green, purple hues, light, bright tones with thin, low density texture. Properties of fabric conveying the simple image are blue-green, purple-blue, green-yellow hues, and strong, vivid tones, with luster and flat texture.

• 한국염색가공학회지
• /
• 제9권4호
• /
• pp.28-38
• /
• 1997

Peach skin fabrics were washed by the general and ultrasonic washing systems using different conditions. The physical properties of the washed fabrics were estimated. The following results were obtained through experimental data and their analysis. The tensile properties were changed due to fabric running speed and washing methods. The lower the running speed, the higher the extensibility and resilience and the lower the linearity and tensile energy. In the general washing method, the extensibility and resilience had lower values than those of the ultrasonic washing method and the linearity and tensile energy had the higher values than those of the ultrasonic washing system. The bending properties, bending moment and histeresis, were estimated. These values were generally lower in the ultrasonic washing system than those of the general washing system. The faster the washing speed, the higher the value of hysterisis. The shear properties were affected by the fabric running speed and washing methods. Shear stiffness and hysteresis of shear forces increased according to the increase of the fabric running speed. The values were higher in the general washing system than those of the ultrasonic washing system. The compressional energy was affected by the fabric running speed. The higher the fabric speed the higher the compressional energy. The ultrasonic washing system had lower compressional energy than the general washing system. The higher the running speed, the lower the coefficient of friction and geometrical roughness. The values of geometrical roughness were infienced by the removal of the sizing agent. The higher the remaining sizing agent, the higher the fabric weight and the thicker the thickness of fabric.

• Composites Research
• /
• 제30권1호
• /
• pp.26-34
• /
• 2017

본 연구에서는 직물섬유 복합재의 열전도를 구하는데 있어 기존의 연구보다 개선된 방법을 제시하고, 직물섬유의 기하학적 구조가 복합재의 열전도도 향상에 미치는 영향, 그리고 유전 알고리즘(Genetic algorithm)을 이용하여 복합재의 열전도도 향상을 위한 최적구조 설계에 관한 연구를 하였다. 직물섬유의 구조를 토우의 물결무늬와 너비 및 두께를 이용하여 구현하였고, 열전도도는 열전기유사법(Thermal-electrical analogy)을 이용하여 구하였다. 유전 알고리즘에서 염색체 문자열은 fill과 warp tow의 두께와 너비로 하였고 복합재의 열전도도를 향상 시키는 방향으로 목적함수를 정하였다. 연구결과 직물섬유 복합재의 열전도도를 예측을 위한 향상된 방법이 제시되었고, 섬유토우 사이의 간격(inter-tow gap)이 넓어 질수록 복합재의 열전도도가 감소하는 것으로 나타났다. 직물섬유 복합재의 구조 최적화에서는 이론적 수치해석 결과가 제시되었는데, 전체적으로 섬유토우(tow)의 축의 수직방향보다는 축 방향의 열전도도 성분이 복합재의 전체 열전도도 향상에 크게 기여를 하는 것으로 나타났다.