• 감성과학
• /
• 제7권4호
• /
• pp.25-33
• /
• 2004

본 연구에서는 경사와 위사의 장력에 기인되는 감성 봉제용 직물의 마찰특성을 KES-FB 계측기를 이용하여 분석하였다. 직물의 마찰특성은 직물표면의 마찰계수, 마찰계수의 평균편차, 그리고 표면요철도를 측정하였다. 이들 표면특성치를 분석하기 위해서 75d/36f PET 필라멘트를 경사로 사용하고 100d/192f PET 필라멘트를 위사로 사용하여 5매 주자직 직물을 Omega와 Picanol 직기에서 각각 제직하고 이들을 같이 연결하여 염색가공 공정을 진행시켰다. 이들 가공된 직물의 직물표면특성은 제직시 측정된 경사와 위사의 장력특성과 함께 분석되어 졌으며 직물의 중앙부위와 양 셀베지 부분의 직물 위치에 따른 표면특성의 차이가 분석되어졌다.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.1-7
• /
• 1998

In this study, PET fabric was hydrolyzed with NaOH using the Tank m/c and Liquor-flow m/c to determine the alkali hydrolysis properties of PET fabrics. The results were as follows ： The weft density and tensile strength of PET fabrics hydrolyzed with Liquor-flow m/c were higher than those hydrolyzed with Tank m/c in case of less than 10％ of weight loss. However, above 10％ of weight loss, reverse phenomenon was showed. K/S value of hydrolyzed PET with Liquor-flow m/c was higher than that with Tank m/c above 10％ of weight loss. It was observed that the micropores of PET surface were collapsed due to physical force(abrasion and collision) during hydrolysis. Bending rigidity of hydrolyzed PET fabric was about 32％ and 40％ of bending rigidity of warp and weft direction of untreated fabric at 7％ of weight loss, respectively. Above 7％ of weight loss, decrease rate was decreased.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.199-206
• /
• 2000

Silk fabric was dyed using methanol extract of Chrysanthemum boreale at $60^\circ{C}$ for 40min. The K/S value of the silk fabric was highest in the premordanting method, while the amount of absorbed mordant was largest in the Cu-mordanting. The surface colors of the dyed fabric highly depended upon mordants or mordanting methods. For all cases, the value of the dyed fabric was dark. The chroma was high by using the Cr-mordant and the color difference was distinct by using the Fe-mordant. Cu-mordanted silk showed highest fastness to light. Dyed silk fabrics by mordanting method showed good antimicrobial activity ad deodorization property.

• 한국염색가공학회지
• /
• 제4권4호
• /
• pp.110-116
• /
• 1992

For the modification of PET surface, Perfluoropropene and Methyl alcohol were LT-plasma polymerized on the PET fabrics as thin films by means of 13.56 MHz radio frequency generator. The surface properties of PET fabrics were modified from hydrophobic to hydrophilic by application of the postplasma reaction of thin films. The evidence of the modification was identified by observation of the presence of hydroxy group in IR spectrum and the evaluation of degree of hydrophilicity was performed by measuring frictional static voltage of PET fabric with cotton fabric. For the case of modification by PFP, the result performed at the condition of 25 W, 70 m torr has shown to be effective, and for MeOH, result performed at the condition of 25 W, 100 m torr effective. The effect of hydrophilic surface modification of MeOH plasma polymer was superior to that of PFP-plasma polymer.

• 한국염색가공학회지
• /
• 제26권2호
• /
• pp.99-105
• /
• 2014

In this study, $TiO_2$ and Ag powders were deposited on the PET fabric using an atomizer in order to study the characteristics of particle deposited fabric. To improve the particle deposition, the surface of the fabric was pre-treated with an electron beam and its effect was studied with the deposition of those elements on the fabric. The SEM was used to observe the morphology of the deposition fabric and through the EDS analysis, the deposition of $TiO_2$ and Ag was confirmed. Also, the absorbance of the particle deposited fabric was measured using the Methylene Blue to verify the photolysis nature of $TiO_2$. Moreover, the antibiotic nature of Ag on the surface of the PET fabric was identified through the antibiosis test.

• 대한가정학회지
• /
• 제35권3호
• /
• pp.275-286
• /
• 1997

The effects of water-and oil-repellent finishes on the surface characteristics of polyester fabrics were investigated in this study. Three kinds of fluoropolyment were selected as water=and oil-repellent finishing agents. The effects of water-and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respects to crease resistance, contact angle and wicking time. The results of this study were as follows: 1. The polyester fabrics treated with fluoropolymers showed much higher water repellency and oil repellency than those of untreated polyester fabrics. Water-and oil-repellency of fabrics were increased with the crystallinity and the hydrophobic-hydrophillic components of fluoropolymers. 2. Water repellency of fabrics treated with fluoropolymer with hydrophobic components was the highest. Oil repellency of fabrics treated with fluoropolymer with high crystallinity was the highest. Water-and oil-repellency of fabrics treated with fluoropolymer with hydrophyllic components was low comparatively. 3. The crease resistance of polyester fabrics treated with fluoropolymer nearly approached to that of untreated polyester fabric. 4. The water-and oil-repellent finishes improved contact angle markedly. Especially the contact angle of ployester fabric treated with fluropolymer with hydrophobic component was the biggest. 5. The wicking time of polyester fabric treated with fluropolymer with hydrophobic component was the longest.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.1-11
• /
• 2000

This paper surveys the fabric weavability and machine efficiency in the various weaving looms such as Projectile, Rapiers, and Air-jet. Used projectile loom was Sulzer-PU, and FAST-R, THEMA-11E, and Picanol-GTX were used for Rapier looms, as the Air-Jet looms, Picanol PAT and OMNI types were used. Using these looms, 5 harness worsted satin fabrics were woven for surveying the fabric weavability and machine efficiency. Warp yam count of fabric is 1/40Nm, Sirofil, and filling is 1/30 Nm, worsted. End breaks of warp and filling directions for the various types of looms are measured and discussed with the mechanism of each loom. Warp and filling yam tensions are also measured and analysed with open width of shedding motion of each weaving machine. And various warp yam tensions with open width of shedding are measured and analysed according to the warp yam in various heald frame. These results fire also discussed with temples such as bar and ring. Warp yam tensions at the various positions on the fabric with various looms are measured and discussed with fabric mechanical properties such as tensile, bending, shear and surface.

• 한국의류산업학회지
• /
• 제18권2호
• /
• pp.244-251
• /
• 2016

Viscose rayon filament fabrics have been called 'artificial silk' and beloved as summer clothing materials for a long time in Korea. This is because the viscose rayon filament fabrics reveals glossy surface and cool touch feeling compared to other conventional fabrics composed of staple fibers. Therefore, we tried to prepare the higher value added viscose rayon filament fabrics for summer textile products. In this study, we applied gallnut extract to the viscose rayon filament fabric to develop summer fabrics with natural color and multi-functions such as antibacterial and antioxidant properties. This process also pursue eco-friendly and multi-functional fabric finishing from the natural material "gallnut". In addition, various pre-treatment with cationizer, chitosan, or chito-oligomer was applied to the finishing process to improve the finishing efficacy and durability. Consequently, it was found that the active component of gallnut extract was successfully incorporated to the viscose rayon filament fabric through a pad-dry-cure process. And, the treated viscose rayon filament fabrics showed excellent antibacterial and antioxidant properties. Therefore, it was expected that the rayon filament fabrics treated by gallnut extract could be used as effective summer fabrics preventing the growth of bacteria and skin ageing as well as providing cool touch feeling. However, the pre-treatments were not that meaningful on the functionalities but effective on coloring.

• 한국염색가공학회지
• /
• 제13권3호
• /
• pp.165-171
• /
• 2001

In this study, UV/vis. spectra of color solution extracted from onion shell and dyeing properties of polyamide fibers such as wool, silk, and nylon were investigated. Also, the effect of mordanting on wash fastness and light fastness was Investigated. The amount of colors extracted was increased with extracting temperature and time. The wavelength of maximum absorption of onion shell extract corresponds to flavonol peak and quercetin peak. Also, spectra of color solution were shifted to longer wavelength at higher pH values. It appeared that the optimum condition of the dyeing of wool, nylon, and silk fabrics with onion shell extract was $60^\circ{C}$ , 30min, and pH 4.0 of dyed bath. Surface colors of the dyed fabrics were different according to the used mordants: Al and Cr mordanted fabrics were dyed in yellowish colors, Cu mordanted fabric in greenish color, Sn mordanted fabric in orange color, and Fe mordanted fabric in khaki color. The mordanting was effective at improving wash fastness and light fastness.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.45-54
• /
• 2001

The Purpose of this studs was to investigate dyeing properties of silk and nylon fabrics by Polygonum cuspidatum extract. The properties were evaluated by it's extracting condition, dyeing condition, mordants variables, methods of mordanting and color fastness. Silk fabric showed the highest K/S value at $50-70^\circ{C}$, while Nylon fabric showed at $90^\circ{C}$. Surface color of dyed fabrics were various by the used mordants ; none-, and Al-mordanted fabrics were yellow, Cu-mordanted fabrics were redish yellow, Fe-mordanted fabrics were olive green. Fe-mordanted silk fabrics showed excellent laundering fastness and light fastness. Both silk and nylon fabric showed excellent laundering and dry cleaning fastness.