• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.16-25
• /
• 1984

The sericin fixation of silk fabrics by epoxy resins was studied in the presence of aqueous salt solution in different solvents at the indicated temperature for the desired time. Heavy weight gains were obtained in the reaction with glycerol diglycidyl ether (EX-313) and ethylene glycol diglycidyl ether (EX-810) catalyzed by potassium thiocyanate in such solvents as carbon tetrachloride and p-chloroethylene. The obtained results were summarized as follows; 1) The tested resins were found similar in reaction behavior to silk fabric. The effect of fixation and weight gains was higher in EX-810 than EX-313. 2) The weight gains were increased with reaction time and temperature, and degumming ratio reached a constant value in 90 min at 70$^{\circ}C$. 3) The weight gains and the degumming ratio reached an equilibrium at 3-5% of epoxy concentration. 4) The weight gains were remarkably influenced and increased by the concentration of salt solution. The degumming ratio reached an equilibrium over 0.5N concentration of salt. 5) The weight gains were increased with the dipping time in gently-sloping. The degumming ratio reached an equilibrium over 15 min dipping. 6) The effect of sericin fixation of hydrophobic solvents, such as Carbon Tetrachloride, p-Chloroeth-ylene, Cyclohexane, Xylene and Toluene, was found suitable. 7) The effect of drying temperature was not remarkable on the weight gains and the degumming ratio. 8) There was a slight decrease in the moisture regain of sericin-fixed silk and it may be possible to maintain the moisture regain in the sericin-fixed silk by the epoxy resins. 9) The results on testing physical properties of sericin-fixed silk fabric were as follows; The crease recovery was almost not different from undegummed fabric, but inferior to degummed fabric. The tensile strength was improving in accordance with the effect of sericin fixation, either the elongation did.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.163-174
• /
• 2018

Consumer and property evaluation of wetsuit materials were conducted to obtain useful data for developing competitive products that meet consumer expectations and improving industrial competitiveness. Data were collected through online surveys of 213 domestic consumers who have experienced wearing wetsuit among marine leisure activities. Five types of commercial wet suit materials by brand and four types of commercial wet suit materials with the same quality by thickness were collected. Then, their physical properties, salt water resistance and thermal insulation rate were evaluated and compared. As a result, the most commonly used wetsuit material is 3 to 5 mm thick, and the basic jersey material is bonded on both sides. As a processing for imparting functionality, processing for improving warmth and reducing surface resistance are most frequently used. Consumers often feel uncomfortable when wearing a wetsuit, such as wearing comfort, weight, ease of movement, stretchability, and clothing pressure, which are different from those of casual wear. Also, mechanical strength and warmth were considered to be the most important criteria for selection of wetsuit material for purchase or rental. The mechanical properties of brand A and B were better than those of brand C, D, and E. Resilience and thermal shrinkage were better in brand C, D, and E. On the other hand, there was no significant difference in the physical properties due to the difference in thickness of the material at the same quality. Also, it was found that the thicker the material, the more stable it is in the heat. Brand A and B had superior salt water resistance than brand C, D, and E. In the thermal insulation test, brand A and B showed better insulation characteristics than brand C, D, and E, but the types of bonded fabric and surface finishing of materials were thought to have affected. In comparison of the thickness, the thicker the materials, the better the salt resistance and the thermal insulation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.5
• /
• pp.686-695
• /
• 2000

Recently, with a growing interest of health and environment, chitosan which was good in no harmful effect to human body and environment, has been watched as the finish treatment of hygiene and pleasantness. The purpose of this study is to develop multifunctional fabric that was improved antimicrobial activity and deodorization rate, water absorption, static voltage and dye absorption by treatment of nylon 6 grafted with acrylic acid added in chitosan. FT-IR spectra of the grafted with acrylic acid added in chitosan shows peaks of COOH and NH2. Antimicrobial activity and deodorization rate of chitosan and grafted with acrylic acid added in chitosan were increased greatly than the control, durability of laundry of grafted with acrylic acid added in chitosan was good. In case of chitosan was dyed acid dyes and grafted with acrylic acid added in chitosan was dyed basic dyes, dye absorption of them were increased than the control. Moisture regain, absorption time and tensile strength of grafted with acrylic acid added in chitosan was increased greatly than the control.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.431-441
• /
• 1998

Polyester microfiber fabrics were decomposed at 100, 110, 120 and 140 t of temperature and 0.5, 1.0 and 1.5% of sodium propyleneglycolate/propyleneglycol solution(SPG-PG). Characteristic decomposition feature and physical and chemical properties of the decom- posed PET microfiber fabrics were discussed. The activation energy was 18.77 kcal/mol and the dyeability of the decomposed PET microfiber fabrics was found to be improved as it was supported by the examined K/S values. Up to the 20% of the weight loss of the PET microfiber fabrics, K/S values incresed with increasing the weight loss. The melting temperature of PET microfiber fabrics decomposed by SPG-PG showed no fundamental change. Tensile strength of the decomposed PET microfiber fabrics decreased linearly in accordance with the increased the weight loss of the PET microfiber fabrics. The moisture regain and the tactilities increased in accordance with the increased the weight loss of the PET microfiber fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.987-997
• /
• 1999

The purpose of this study was finding out the appropriate cleaning method for buried fabrics from old tombs focusing on the conservation of textiles. Cleaning effects and physical properties change depending on cleaning method have been analysed, The following results were obtained from this study : 1. Wet cleaning showed better effect on the cleaning of fabrics compared to solvent cleaning which meant more water-soluble soils existed than oily soils. 2. All the cleaning methods used did not cause any distorsion or shrinkage to the fabrics because fabrics had been stabilized for a long time 3. Addition of detergent to cleaning system decreased the friction of fiber during cleaning rocess so that the damage of fabrics could be minimized., 4. Ironing is an undesirable process because heat remarkably weakened fibers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.998-1006
• /
• 1999

This study has investigated the relation between the sewing speed and seam breaking strength applied perpendicular to the seam direction. Breaking strength efficiency breaking mode of seams were examined under various sewing conditions using three kinds of sewing threads and four kinds of fabrics. The results obtained are as follows : 1. According to the increase in sewing speed seam strength was remarkably decreased. Seam strength and its loss difference were shown variously as threads and fabrics were mixed. 2. In case of fabrics with higher strength seam strength showed higher. And the seam strength was determined by the loop strength. 3. In case of fabrics with lower strength seam strength and its difference for every sample showed lower. So the strength of fabrics dominated the seam strength than those of threads. 4. In the experiment using various fabrics and sewing threads there was a type of thread appropriate to each fabric. Fabrics and threads with have similar physical properties were shown proper seam efficiency. 5. The breaking mode was different for every sample seam that was tested.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1079-1089
• /
• 1998

Various fabrics, including natural fibers, regenerated cellulosic fibers, synthetic fibers, blend yarn, and mixture fabrics, were treated with the solutions of high purity chitosan in 1% acetic acid, having high viscosity of 930cps or low viscosity of 8cps. Physical/ mechanical properties of the treated fabrics samples were measured using Kawabata Evaluation System and drape tester. From these, hand values and total hand values of the fabric samples were calculated using Kawabata-Niwa translation equations. KOSHI, SHARI, HARI values have increased for the treated samples, while FUKURAMI values have decreased in general.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.23-31
• /
• 2001

To improve the dyeability and colorfastness of cotton and silk fabric dyed with natural dye of safflower, cotton and silk fabrics were pre-treated with different mordants such as halliic-acid, alum, brine and tannic-acid. Also, to investigate the effect of finishing treatment of fabrics on dyeability, cotton was treated with chitosan and mercerized before dyeing. L, a, b, ΔE and colorfastness(light, Laundry, sweat) of each samples were measured and compared. Mordant treatment didn't improved significantly dyeability and colorfastness on cotton and silk. But, on cotton mercerization and chitosan treatment improved dyeability and colorfastness. To compare the efficiency of extracted dye and Powered dye, extracted red dye of safflower prepared as powder. Cotton and silk were dyed with dyeing solution which made with powdered dye according to different concentration. Efficiency of powdered dye was found out lower than extracted dye solution.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.1
• /
• pp.66-70
• /
• 2003

Silk fabrics were dyed with persimmon dyeing solution. The persimmon extracts were obtained with boiling water from persimmon fruits and leaves. The changes of K/S values were investigated according to the concentration of solution, the ripeness of persimmons and the method of mordanting. The colours of the fabrics differed according to the kinds of mordants. The mordant, FeSO$_4$, was more effective than other mordants. The physical properties were not changed hardly after the natural dyeing with persimmon extracts.

• The Research Journal of the Costume Culture
• /
• v.19 no.4
• /
• pp.851-862
• /
• 2011

The purposes of this study were to identify the material manipulation techniques for paper garments and their characteristics. Reference books or articles were reviewed and catalogues from paper garments exhibition or show, brochures from Paper Museums, and internet sites of paper fashion designers were selected for analysis. Paper has much similarity with natural cellulose textiles in appearances and contents but has much distinct differences in their physical characteristics such as strength, durability, washability, and resilience, and could be treated as one category of textiles. Paper garments were developed with practicality and functionality for the poor and Buddist monks at first but progressed into more aesthetics later for the rich. Paper garments could be divided into 4 categories of garments made of paper, paper thread fabric or knit, modified paper with wanter, and beaten bark of mulburry bush. Paper can be manipulated by coloring & cutting, bonding, or quilting and bonding or quilting can reenforce the strength of paper but cannot increase flexibility. Paper manipulated by weaving or knitting has very similar physical properties as cotton or linen and ideal for summer textiles. Paper can be manipulated with water to make a paper paste and bodice can be moulded with paper paste or Joomchied. Also we can express beautiful patterns on the surface of paper by washouting. Konnyaku paste or lacquer can be used to make paper garments to be waterproof.