• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.1
• /
• pp.47-56
• /
• 2009

Purpose: To find optimized luminosity factor of color from light transmission filter. Methods: To make $Y_{1-x}G_{x}$, $Y_{1-x}P_{x}$ by using CR-39 compound within dipping method, mixing up Y(Yellow), G(green) and P(pink) for optimize eye sensitivity. Modeling for relative luminous efficiency(relative sensitivity) curves in Luminose transmission, it could be resolved by Multiplying sensitivity of eye within transmission rate of Lens ($P_f({\lambda}=T({\lambda}){\cdot}P({\lambda}).)$.). To evaluate Wavelength between 400~700 nm, relative luminous efficiency curve in Area and Height value is being used. Results: In color filter of $Y_{1-x}G_{x}$ position of x equals to 0.04, 0.1, 0.08, 0.12, 0.14, 0.5 at ${\beta}=S_1/S_0{\cdot}100$ each consist value of 76.1, 77.9, 80.7, 81.6, 80.2, 18.6 In color filter of $Y_{1-x}P_{x}$ position of x equals to 1.00, 0.2, 0.6, 0.8 at ${\beta}=S_1/S_0{\cdot}100$ each consist value of 74.3, 74.0, 70.5, 33.0 The result from experiment $Y_{1-x}P_{x}$ value less than $Y_{1-x}G_{x}$, from evaluating luminous efficiency curve and test was successfully optimized. Conclusions: Optimized relative luminous efficiency curve result have value of X=0.12-0.14 at $Y_{1-x}G_{x}$.

• Journal of Fashion Business
• /
• v.4 no.3
• /
• pp.141-155
• /
• 2000

The purpose of this study is to offer basic data to adolescents' cosmetic culture by investigating and analysing the choices made by female students who have been becoming principle consumers of cosmetics these days. Firstly, social and cultural backgrounds and concepts of N generation, and then characteristics and influencing powers of female students were reviewed. And this study also included questionnaire surveys of 500 female students in middle and high schools located in Seoul. Data were processed using a SPSS$^+$ program and analyzed by using frequency, percentage and the $X^2$-test. The major findings run as follows: Female students have the effects of spreading their words quickly and abilities of making a decision what to buy. And they accept consuming behaviors itself as a part of cultural lives. Therefore, industries have acknowledged them as new principal consumers with a powerful influence in the market. They also play an important role in active consumer as emotional generation who has distinct personalities and prefer fashion trends, changes and innovations. They show conformities with their peer groups and they also want to identify themselves with characters or stars. The cosmetic behaviors of female students relating to demographic characteristics showed a significant relation to grades, majors, school groups and places of residence. Female students have a lot of interest and knowledge about cosmetics. And they use various cosmetic products. This study demonstrated the age for using make-up for the first time has been becoming younger more and more. Recently, female adolescents tend to use face powder, lip gloss, mascara and eye shadow. It is assumed that cosmetic purchases of female students can be considered as an impulsive aspects. However, before purchases, the proportion of students having any particular cosmetic brand in mind previously has been increasing. They take into consideration skin safety, the quality of product and color, when purchasing cosmetic products.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.5 no.1 s.12
• /
• pp.56-70
• /
• 2007

Shade cosmetics that were considered to be women's exclusive possession, are now expanding its market to men and teenagers. As a result, development of subdivided shade cosmetics is becoming active. In these market environments consumers demand various personalized desires through beauty care, therefore enterprises have to establish marketing strategies to meet these desires. Accordingly this study aimed to provide information actually needed in cosmetics development by researching shade cosmetics in subdivision according to items and basic data that will be helpful in establishing marketing strategies of shade cosmetics. The survey was conducted among adult females with age of 20 to 26, living in Seoul and several local cities. 387 survey papers were used in the analysis among 500 survey papers distributed. The results were summarized as following. First of all, many women were doing overall makeup generally. The younger they tended to do partial makeup more and the older they tended to do overall makeup more according to the analysis on actual conditions of using shade cosmetics. Many women got information related to shade cosmetics from friends or family. This is an example of the fact that shows collecting information from human relationship such as friends and family played an important role and surrounding environment can be a factor that can have impact on purchasing behavior. Purpose of makeup was mostly to show courtesy and the younger they tend to answer that they do makeup to look beautiful. The order of the most frequently used shade makeup was makeup base>foundation>two way cake. The most important focusing point in shade makeup was the eye. In choosing colors they chose their favorites colors most frequently.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.463-470
• /
• 2015

When a camera installed on a vehicle is used, estimation of the camera pose including tilt, roll, and pan angle with respect to the world coordinate system is important to associate camera coordinates with world coordinates. Previous approaches using huge calibration patterns have the disadvantage that the calibration patterns are costly to make and install. And, previous approaches exploiting multiple vanishing points detected in a single image are not suitable for automotive applications as a scene where multiple vanishing points can be captured by a front camera is hard to find in our daily environment. This paper proposes a camera pose estimation method. It collects multiple images of lane markings while changing the horizontal angle with respect to the markings. One vanishing point, the cross point of the left and right lane marking, is detected in each image, and vanishing line is estimated based on the detected vanishing points. Finally, camera pose is estimated from the vanishing line. The proposed method is based on the fact that planar motion does not change the vanishing line of the plane and the normal vector of the plane can be estimated by the vanishing line. Experiments with large and small tilt and roll angle show that the proposed method outputs accurate estimation results respectively. It is verified by checking the lane markings are up right in the bird's eye view image when the pan angle is compensated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.705-708
• /
• 2018

Among biometrics commercialized for security, iris recognition technology has the most excellent security for the probability of the match between individuals is the lowest. Current commercialized iris recognition technology has excellent recognition ability, but this technology has a fatal drawback. Without the user's active cooperation, it cannot recognize the iris correctly. To make up for this weakness, recent trend of iris recognition development mounts a non-volunteering, unconstrained method. According to this information, the objective of this research is developing a module that can identify people iris from a video acquired by high performance infrared camera in a range of 3m and in a involuntary way. For this, we import images from the video and find people's face and eye positions from the images using Haar classifier trained through Cascade training method. finally, we crop the iris by Hough circle transform and compare it with data from the database to identify people.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.4
• /
• pp.2078-2083
• /
• 1970

The purpose of this study is to give the data neccesary for improving the planning of drainage structures, specially inverted siphons, in irrigation channels. With the samples of 15 drainage inlets, one drainage flume, 16 drainage inverted siphons and 6 drainage culverts in the 3 lines of irrigation channel under Chong-Won Irrigation Association, author abtained the following results. 1. It is presumed that design drainage discharge should be determined with some additional reserves, on the basis of the maximum rainfall intensity in local area and the size of drainage area on the topographical map, avoiding the way of eye measure. 2. Location of drainage inlet should be kept away from the place where topography can make lots of wash load, but when unavoidably allowing the inflow into irrigation channel, wash load outlet with even the purpose of drainage, or drainage flume in stead of drainage inlet should be taken account of. 3. It is presumed that drainage flume may be the structure which can perform its function from a structural point of view as far as topography permits. 4. Drainage inverted siphon should be avoided at any place as much as possible; a) In case that location of the siphon would be permitted only at paddy field, drainage area hauing the amount of discharge which requires more than 90cm in diameter could only be allowed. b) In this case, crest elevation of the tank of both inlet and outlet, at least, should not be lower than the surface level of paddy field. c) As far as topography and stratum permit, ratio of depth of outlet tank to head drop should be decreased as much as possible so that discharging efficiency of wash load could increase. d) In case of avoiding the setting of the siphon, irrigation aqueduct, irrigation inverted siphon, or drainage flume should be recommended in accordance with topography. 5. Discharging capability of wash load by drainage culvert appeared to depend hardly upon the diameter of the culvert, but greatly upon the location, specially near village, for there stones and dirts dumped may considerably be piled up. So, a counter plan for that is required.

• Journal of Fashion Business
• /
• v.4 no.4
• /
• pp.107-121
• /
• 2000

The purpose of this study is to offer basic data to adolescents' cosmetic culture by investigating and analysing the choices made by female students who have been becoming principle consumers of cosmetics these days. Firstly, social and cultural backgrounds and concepts of N generation, and then characteristics and influencing powers of female students were reviewed. And this study also included questionnaire surveys of 500 female students in middle and high schools located in Seoul. Data were processed using a SPSS$^+$ program and analyzed by using frequency, percentage and the $X^2$-test. The major findings run as follows: Female students have the effects of spreading their words quickly and abilities of making a decision what to buy. And they accept consuming behaviors itself as a part of cultural lives. Therefore, industries have acknowledged them as new principal consumers with a powerful influence in the market. They also play an important role in active consumer as emotional generation who has distinct personalities and prefer fashion trends, changes and innovations. They show conformities with their peer groups and they also want to identify themselves with characters or stars. The cosmetic behaviors of female students relating to demographic characteristics showed a significant relation to grades, majors, school groups and places of residence. Female students have a lot of interest and knowledge about cosmetics. And they use various cosmetic products. This study demonstrated the age for using make-up for the first time has been becoming younger more and more. Recently, female adolescents tend to use face powder, lip gloss, mascara and eye shadow. It is assumed that cosmetic purchases of female students can be considered as an impulsive aspects. However, before purchases, the proportion of students having any particular cosmetic brand in mind previously has been increasing. They take into consideration skin safety, the quality of product and color, when purchasing cosmetic products.

• The Korean Journal of Air & Space Law and Policy
• /
• v.21 no.2
• /
• pp.123-155
• /
• 2006

2001. 9. 11 aviation terror showed us that there are lots of problems in aviation security and we need efficient counter-plans. According to this event, many countries are coming up with various countermeasures. After first hijacking in 1950, the aviation terror is occurring with more various methods until these days. And the scale is bigger than former so they're making much bigger damages. Especially, the case of 9.11 terror attracted people's eye of the world because of enormous casualties and damages. It aroused many people's self-awakening therefore as an important factor the security is given much weight in the aviation safety. In order to keep the step like this tendency and the development of aviation security, beginning with America lots of countries of the world are pursuing diverse aviation security's counter-plans of new side. At this point of time, for our development in aviation industry we should make efficient aviation security countermeasures. In this study, We compared our aviation security activities with major countries after 9.11 terror.

• Macromolecular Research
• /
• v.15 no.3
• /
• pp.256-262
• /
• 2007

The purpose of this study was to determine the effect of surface modification on the fibrovascular ingrowth into porous polyethylene (PE) spheres ($Medpor^{(R)}$), which are used as an anophthalmic socket implant material. To make the inert, hydrophobic PE surface hydrophilic, nonporous PE film and porous PE spheres were subjected to plasma treatment and in situ acrylic acid (AA) grafting followed by the immobilization of arginine-glycine-aspartic acid (RGD) peptide. The surface-modified PE was evaluated by performing surface analyses and tested for fibroblast adhesion and proliferation in vitro. In addition, the porous PE implants were inserted for up to 3 weeks in the abdominal area of rabbits and, after their retrieval, the level of fibrovascular ingrowth within the implants was assessed in vivo. As compared to the unmodified PE control, a significant increase in the hydrophilicity of both the AA-grafted (PE-g-PAA) and RGD-immobilized PE (PE-g-RGD) was observed by the measurement of the water contact angle. The cell adhesion at 72 h was most notable in the PE-g-RGD, followed by the PE-g-PAA and PE control. There was no significant difference between the two modified surfaces. When the cross-sectional area of tissue ingrowth in vivo was evaluated, the area of fibrovascularization was the largest with PE-g-RGD. The results of immunostaining of CD31, which is indicative of the degree of vascularization, showed that the RGD-immobilized surface could elicit more widespread fibrovascularization within the porous PE implants. This work demonstrates that the present surface modifications, viz. hydrophilic AA grafting and RGD peptide immobilization, can be very effective in inducing fibrovascular ingrowth into porous PE implants.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.293-311
• /
• 2021

The volcanic rocks that make up Yeongdo island, an administrative district located on the southern coast of Busan, are composed of andesitic and rhyolitic rocks. Andesitic rock is mainly composed of volcanic breccia has a phenorysts of plagioclase and contains rock fragments. The rhyolitic rock is composed of volcanic angular rock at the base of Mt. Bongnae, and welded tuff forms the main mass of Mt. Bongnae. The fiamme structure can be easily observed with the naked eye, and the higher the altitude, the weaker the welded structure develops and the less the amount of rock fragments and crystals constituting the welded tuff. It is indicated that the magma that formed this study area is related to the tectonic environment of the continental margin related to subduction, and that it erupted after undergoing fractional cystallization at the same time with some contaminant in the continental crust. As a result of analyzing the main elements by altitude, it is believed to be the result of mixing at least 4 times or more of magma batches.