• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.130-135
• /
• 1997

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by longitudinal distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product changes with the aspect ratio of product and increases with the decreases in die length and in eccentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.6
• /
• pp.839-845
• /
• 1993

One of the major problems of cancer chemotheraphy is the development of drug resistance in tumors, resulting in reduced responsiveness to subsequent treatments. The folate antagonists are being used to treat such diverse illnesses as cancer, leukemia, psoriasis, rheumatoid arthritis, etc. Previous studies have established that resistance to antifolates may occur in mammalian tumor cells by one or more of five mechanisms ; (a) an increase in the levels of the target enzyme, generally as a consequence of gene amplification ; (b) an alteration in the target enzyme, leading to an enzyme with a decreased binding affinity for the drug ; (c) a decrease in the uptake of the drug into the cells ; (d) increased extrusion of drugs out of cells ; (e) impaired ability to polyglutamylate the parent drug which is capable of being intracellularly metabolized to longer chain length.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.549-556
• /
• 2005

Effects of the dimensionless variables on the heat transport phenomena in the extrusion process of a single screw extruder have been studied numerically. Based on the understanding of the solids conveying related to the geometrical structure and characteristics of the screw, the heat balance equation for the solids conveying zone was established and normalized. The finite volume method and power-law scheme were applied to derive a discretized equation and the equation was solved using the alternating direction iterative method with relaxation. Effects of the dimensionless parameters, Biot and Peclet numbers, that define the heat transfer characteristics of the solids conveying zone have been investigated with respect to the temperature of the feeding zone and the length of the solids conveying zone. As the Biot number is increased, the heat loss by cooling dominates to decrease the temperature of the barrel but it has little effects on the temperature of the solids bed and the length of the solids conveying zone. On the other hand, if the Peclet number is increased, the convection term dominates to decrease the temperature of the solids bed and it results in an increase in the length of the solids conveying zone.

• Tunnel and Underground Space
• /
• v.21 no.4
• /
• pp.320-327
• /
• 2011

In this study, for stemming effect in blast of the mortar block body, the crushed granite sand as fine aggregate, which is waste rock obtained at the ○○ limestone mine, was investigated to compare with stemming materials such as sea sand, river sand, clayed soil and water can be acquired easily at the field. The mortar block body was manufactured with the dimensions of 50 cm width, 50 cm length and 70 cm height. The direct shear and sieve separator test were performed, and the properties of friction resistance were analyzed by the extrusion test for five stemming materials. Axial strain of steel bar and ejection velocity of stemming materials due to the explosive shock pressure in blasthole with the stemming length of 10 cm and 20 cm in the mortar blast test were measured by the dynamic data acquisition system. Among stemming materials, axial strain showed the largest value at the crushed granite sand as fine aggregate, and the ejection velocity was the smallest value at the stemming of water. The results has shown correlate with harden unit weight in blasthole, particle size distribution, shear resistance, and extrusion strength of stemming materials. The ejection velocity of stemming material at the mouth of blasthole and the axial strain of steel bar in the inside of blasthole tend to be inversely proportional to each other, represent exponentially.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.123-131
• /
• 1997

Growth of triploid abalone, Haliotis discus hannai induced by cody (3$^{\circ}C$) shock and its feed efficiency were investigated from larva to adult for 51 months. After 51 months from triploidy induction, the triploid abalones have outgrown to diploid abalones in shell length and total weight. Triploid abalones with inhibition of extrusion of first polar body (3n-1pb) were outgrown to diploid abalones, however, triploid abalones with inhibition of extrusion of second polar body (3n-2pb) were not significantly different from diploid controls in shell length and total weight through the whole rearing period (P<0.05), because of their heterozygosity differences. Daily feeding rates and feed conversion rates decreased with the growth of abalones and both rates had no differnce between two experimental groups. After 51 months from inducing triploid, conditin index of triploid abalone (64.1%) was higher than that of diploid control (59.4%) (P<0.05). Survival rate was 63.0% in triploid group (3n-1pb 62.0%, 3n-2pb 64.0%) and 62.0% in diploid group during the experimental period.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.185-196
• /
• 2000

Patients who want to reduce their lip protrusion usually estimate the severity of the lip protrusion on the frontal aspect. Most orthodontists have a perplexed experience of a reduced thin line of vermilion border on the frontal aspect as incisors we retracted, even though the lip protrusion is thought to be reduced favorably on the sagittal aspect. Some patients also look older after orthodontic treatment because of severe lip thinning. This unaesthetic reduction of vermilion border urges us to study the vertical lip change during orthodontic procedure. The purpose of this study was to evaluate the vertical lip and perioral soft tissue changes in respect to incisor retraction in an effort to analyze which factors might be responsible for their vertical changes, using the multiple regression analysis. The results were as follows. 1. Upper and lower lip philtrum length(SnLs, LiB') were increased after retraction of anterior teeth, where as upper and lower vermilion height(LsSuls, StmiLi), and vermilion length(LsLi) were decreased. 2. Upper and lower lip length(SnStms, StmiB'), and soft tissue lower anterior facial height(SnMe') did not show any significant difference after treatment. 3. The increase of the upper lip philtrum length was mainly influenced by the extrusion of upper anterior teeth(${\Delta}U1V$), and the increase of the lower lip philtrum length was mainly influenced by the initial overjet before treatment. 4. The decrease of the upper and lower lip vermilion height was mainly influenced by the decrease of upper lip thickness.

• The korean journal of orthodontics
• /
• v.44 no.2
• /
• pp.77-87
• /
• 2014

Objectives: This study was designed to define the Korean norm values for the Ricketts analysis. Methods: In this longitudinal study, lateral cephalograms of 31 subjects with normal occlusion were taken biennially from ages 9-19 years. Cephalometric measurements were performed. Parameters for which the 10-year change did not exceed one standard deviation were defined as unchanged. The means and standard deviations for the measured parameters were determined for each age group. Results: No significant changes in growth were observed in the molar relationship, incisor overjet, incisor overbite, mandibular incisor extrusion, interincisor angle, lower incisor tip (B1) to A point-Pogonion (A-PO) plane, upper incisor tip (A1) to A-PO plane, B1 inclination to A-PO, A1 inclination to A-PO, B1 inclination to Frankfurt plane (FH), convexity, lower facial height, facial axis, maxillary depth, maxillary height, palatal plane to FH, cranial deflection, ramus Xi position, or porion location. Continual changes over the 10 years of growth were observed in the maxillary first molar distal position to pterygoid true vertical plane, facial depth, mandibular plane to FH, anterior cranial length, mandibular arc, and corpus length. Conclusions: Clinicians can apply the Korean norms at age 9 as determined in this study when using the Ricketts analysis. The patient's age at the beginning of treatment and their sex should be taken into consideration when drawing visual treatment objectives.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.750-753
• /
• 2003

A method for the mass production was designed by using a screw pumping system that can supply safe bifidobacteria. To prevent the inhibition of cell activity, various additives, which are able to preserve pore of an alginate bead, were used. When materials are sterilized, viscosity decreased below 300cp. Adding bifidobacteria, viscosity increased to 300cp. We manufactured various extrusion nozzles and tested mass productivity of the alginate bead. As a result, 18G, 4mm length sylinge with 13 multi-nozzle showed the best productivity which was about $308{\pm}3ea/min$.

• Korean Journal of Materials Research
• /
• v.14 no.7
• /
• pp.489-493
• /
• 2004

The electrical property of MMC is essentially important to some applications such as power transmission lines and cables, electronic and electrical components as well as electromagnetic shielding equipments. The behavior of electrical resistivity of $SiC_{w}/Al$ alloy composites under as-extruded and annealed conditions has been investigated within the temperature range from room temperature to $450^{\circ}C$. It can be seen that within entire temperature range, the electrical resistivity of composites was higher than that of an unreinforced matrix alloy under the same condition of either as-extrusion or annealing. The temperature dependence of both exhibited positive incline like a typical metal. The variation of electrical resistivity of an unreinforced matrix alloy with temperature from ambient temperature to $450^{\circ}C$ was nearly monotonous, while those of composites increased monotonously at low temperature and rose to a high level after about $250^{\circ}C or 275^{\circ}C$. The difference of these temperature dependences on electrical resistivity can be interpreted as qualitatively the interfaces of $SiC_{w}$ fibers and matrix, where act as nucleation sites.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.127-138
• /
• 2002

There are some cases that dental prosthesis does not operate as properly as expected in oral mouth. The reasons are such as a distortion of the mandibular, a fault of impression taking system or an extrusion of remaining teeth. One of dental prostheses to consider in the situations is the attachment which connects segment bridge. Active discussions are managed on theoretical side of this field but few on clinical side of it, which must be considered first. Accordingly I'd like to suggest a theoretical background for connect attachment of fixed segmented bridge. 1. As a bridge gets longer, burden on dental ligament is increased and the hardness of a bridge is lessened. 2. The flexibility of a bridge increases in ratio to 3 multiplication of the length and decreases in ratio to 3 multiplication of the width of occlusal surface and base of pontic. 3. Precision rest is needed to cope with the shake of teeth and the difference of axis direction among abutments. 4. Female part of the precision rest should be on middle abutment distal and male one on mesial of pontic. 5. Segmented attachment can be efficiently used to cope with long span bridgework and also in case that one piece casting can't be done because of slant of abutment.