• Korean Journal of Plant Resources
• /
• v.24 no.3
• /
• pp.314-318
• /
• 2011

Saururus chinensis is used as a raw material of an anti-rheumatic, poultice, sedative and stomachic. The tea of dried Saururus chinensis leaves has a function of relaxing pains in back and breast and of treating stomach ailments. The plant has the functions of anti-inflammatory, depurative, diuretic, febrifuge and refrigerant. The extraction of functional material is carried out by methanol and ethanol solvents. Mechanochemical grinding is applied as a pretreatment process before extraction to enhance the extraction efficiency by increasing the surface area of the materials while changing the chemical properties of the materials. Extraction of functional materials from the Saururus chinensis after grinding as a pretreatment using the mechanochemical technology was accomplished in this study to investigate the effect of grinding on the antioxidant activities of the extract. Saururus chinensis was ground by the planetary ball mill and the morphology was analyzed by SEM. Mechanochemical pretreatment increased the yields of functional materials from 5.9 g to 6.4, 7.0, and 8.1 g after grinding of 30 minutes, 1 hour and 2 hours, respectively. Nitrite scavenging ability increased from 53.0-71.0% to 61.0-79.0% for the methanol extraction in the solution of pH 1.2. Also, Electron donating abilities were increased from 7.90-33.51% to 11.97-38.51% for the methanol extraction. The extract concentration for the half inhibition of DPPH radicals was reduced from $278{\mu}g/mL$ in the original sample to $263{\mu}g/mL$ in the sample after grinding for the methanol extraction.

• Preventive Nutrition and Food Science
• /
• v.21 no.2
• /
• pp.138-146
• /
• 2016

In this study, we report the optimal extraction conditions for obtaining organosulfur compounds, such as cycloalliin, from garlic by using principal component analysis (PCA). Extraction variables including temperature ($40{\sim}80^{\circ}C$), time (0.5~12 h), and pH (4~12) were investigated for the highest cycloalliin yields. The cycloalliin yield (5.5 mmol/mL) at pH 10 was enhanced by ~40% relative to those (~3.9 mmol/mL) at pH 4 and pH 6. The cycloalliin level at $80^{\circ}C$ showed the highest yield among the tested temperatures (5.05 mmol/mL). Prolonged extraction times also increased cycloalliin yield; the yield after 12 h was enhanced ~2-fold (4 mmol/mL) compared to the control. Isoalliin and cycloalliin levels were inversely correlated, whereas a direct correlation between polyphenol and cycloalliin levels was observed. In storage for 30 days, garlic stored at $60^{\circ}C$ (11 mmol/mL) showed higher levels of cycloalliin and polyphenols than those at $40^{\circ}C$, with the maximum cycloalliin level (13 mmol/mL) on day 15. Based on the PCA analysis, the isoalliin level depended on the extraction time, while cycloalliin amounts were influenced not only by extraction time, but also by pH and temperature. Taken together, extraction of garlic at $80^{\circ}C$, with an incubation time of 12 h, at pH 10 afforded the maximum yield of cycloalliin.

• Korean Journal of Clinical Laboratory Science
• /
• v.46 no.3
• /
• pp.99-105
• /
• 2014

Isolating total DNA from small samples using traditional methods is difficult and inefficient mainly due to loss of DNA during filtration and precipitation. With advances in molecular pathology, DNA extraction from micro-dissected cells has become essential in handling clinical samples. Genomic DNA extraction using small numbers of cells can be very important to successfully PCR amplify DNA from small biopsy specimens. We compared our experimental genomic DNA extraction method (A) with two other commercially available methods: using spin columns (B), and conventional resins (C), and determined the efficacy of DNA extraction from small numbers of cells smeared on a glass slide. Approximately 50, 100, 200, 500 and 1000 cells were isolated from fine needle aspiration biopsy (FNAB) slides aspirated from histologically proven papillary thyroid carcinoma masses. DNA was extracted using the three techniques. After measuring DNA quantity, PCR amplification was performed to detect the ${\beta}$-globin and $BRAF^{V600E}$ gene mutations. DNA extracted by method (A) showed better yield than the other methods in all cell groups. With our method, a suitable amount of genomic DNA to produce amplification was extracted from as few as 50 cells, while more than 100 to 200 cells were required when methods (B) or (C) were applied. Our genomic DNA extraction method provides high quality and improved yields for molecular analysis. It will be especially useful for paucicellular clinical samples which molecular pathologists often confront when handling fine needle aspiration cytology, exfoliative cytology and small biopsy specimens.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1057-1061
• /
• 2002

Effects of modifier and soaking on extraction of triterpenoid saponin (glycyrrhizin) from liquorice were examined using supercritical $CO_2(SC-CO_2)$ at 50 MPa, $60^{\circ}C$, and flow rate of 3 mL/min, and glycyrrhizin content was analyzed by HPLC. Additon of undiluted methanol, ethanol or isopropanol as modifier to $SC-CO_2$ had little influence on extraction yield of glycyrrhizin. Soaking process using water increased the extraction yield as the sample to solvent ratio was increased. Addition of 70% methanol, ethanol or isopropanol to $SC-CO_2$ significantly increased the extraction yields, with 70% methanol resulting in the highest yield. When water at 90% (w/w) of sample weight was used for soaking, the extraction yield and rate increased, 70% ethanol-modified $SC-CO_2$ was almost equal to that obtained using 70% methanol.

• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.27-34
• /
• 2023

In this study, microalgal oil was extracted from Nannochloropsis oceanica cultured in an open raceway pond and converted into biodiesel using a solid acid catalyst. Microalgal oil was extracted from two types of microalgae with and without nitrogen starvation using the KOH-solvent extraction method and the fatty acid content and oil extraction yield from each microalgae were compared. The fatty acid content of N. oceanica was 184.8 mg/g cell under basic conditions, and the oil content increased to 340.1 mg/g under nitrogen starvation conditions. Oil extraction yields were 90.8 and 95.4% in the first extraction, and increased to 97.5 and 98.8% after the second extraction. Microalgal oil extracted by KOH-solvent extraction was yellow in color and had reduced viscosity due to chlorophyll removal. In biodiesel conversion using the catalyst SO₄^2-/HZSM-5, solvent-extracted oil showed a FAME content of 4.8%, while KOH-solvent-extracted oil showed a FAME content of 90.4%. Solid acid catalyst application has been made easier by removal of chlorophyll from microalgal oil. The FAME content increased to 96.6% upon distillation, and the oxidation stability increased to 11.07 h with addition of rapeseed biodiesel and 1,000 ppm butylated hydroxyanisole.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.667-673
• /
• 2017

This study was carried out to verify the antimicrobial effect of Graviola leaves against pathogenic bacteria for the purpose of developing an antibacterial material. The extraction conditions of graviola leaves were $60^{\circ}C$, $80^{\circ}C$ and $98^{\circ}C$, and graviloa leaves werewater extracted at $60^{\circ}C$, $80^{\circ}C$ and $98^{\circ}C$.The extraction yields and extraction conditions were determined. The antimicrobial activity against S. epidermidis, S. aureus and E. coli TOP10 was evaluated by agar diffusion method. The extraction yields were 3.02%, 14.73% and 20.76% at $60^{\circ}C$, $80^{\circ}C$ and $98^{\circ}C$, respectively. The antimicrobial activity against S. epidermidis, S. aureus and E. coli TOP10 was found in S. epidermidis.In the samples extracted at $98^{\circ}C$, a clear zone of 13 mm was observed at 200 mg/mL and of 20 mm at 500 mg/mL. The MIC was 100 mg/mL. The higher the extraction temperature and concentration, the better was the growth inhibition effect. As a result, the natural antimicrobial activity contained in natural materials can solve the problem of resistance to antibiotics. It is considered that antimicrobial activity against S. epidermidis in skin is highly applicable to basic cosmetics and cosmetic materials.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.931-934
• /
• 2002

To establish the optimal conditions for increasing oil yields from grape seed, extraction solvent, extraction time, and temperature were examined. Using grinding, grinding and roasting, grinding and steaming, and grinding, roasting, and steaming methods. Pressing extraction method resulted in 34.0% oil yield. Grinding and roasting, grinding and steaming, and grinding, roasting, and steaming gave 64.3, 63.0, and 65.6% yield, respectively. Ether solvent treatment resulted in 77.4 and 80.9% recoveries after 24 and 48 h static, respectively. The results of sensory evaluation revealed, oils extracted under optimal condition showed the best flavor, aroma, and whor, followed by grinding, grinding and roasting, grinding, roasting, and steaming, and grinding and steaming. Taking these results together, the optimal methods for oils extraction from grape seed were as follows: grape seed ${\rightarrow}$ washing ${\rightarrow}$ drying ${\rightarrow}$ roasting ($95{\sim}100^{\circ}C$ for 20 min) ${\rightarrow}$ cooling (room temperature) grinding ${\rightarrow}$ (0.5 mm>) ${\rightarrow}$ steaming ($0.8{\sim}0.9\;kg{\cdot}f/cm^2$ for 10 min) ${\rightarrow}$ pressing ($1st\;400\;kg/cm^2\;for\;2{\sim}3\;min,\;2^{nd}\;550{\sim}600\;/cm^2$ for 10 min, $3^{rd}\;700kg/cm^2$ for 60 min) ${\rightarrow}$ oils (yield $;85{\sim}90%$).

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.238-243
• /
• 2012

Laminaria roots have not been practically used in Korea. In this study, the extraction process of carbohydrates and minerals from Laminaria roots was investigated and the properties of extracted components were measured. Hydrochloric acid generally used in carbohydrate extraction from seaweeds in order to obtain high extraction yield. But in this work, to utilize extracted components as a functional food material, organic acids such as citric acid were used. Organic acid as extraction solvent has low extraction yield compared to strong acids. Therefore optimum condition for maximum yield was investigated in carbohydrate extraction from Laminaria roots using organic acid. We measured the extraction yields of carbohydrate with variation of extraction temperature, extraction time, concentration of organic acid and particle size of samples. The extraction yield increased as the particle size decreased and temperature became high. The extraction yield was 19.0 wt% after 4.0 hours extraction with 0.2 wt% citric acid at $100^{\circ}C$. Potassium concentration was high compared other minerals in extraction solution, that is, the ratio of K/Na was about 3.0. Fucoidan from Laminaria roots had same carbohydrate composition and lower molecular weight compared that of Undaria pinnatifida.

• Composites Research
• /
• v.31 no.3
• /
• pp.94-98
• /
• 2018

Well-defined, monodispersed hollow ZnO nanoparticles were successfully synthesized by a facile one-pot solution method at room temperature. Hollow ZnO nanoparticles were fabricated using polystyrene nanoparticles as seed particles. The removal of core particles via solvent extraction yields hollow nanoparticles. The structures and morphologies of the obtained products were characterized with Fourier transform infrared (FT-IR), Thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), X-ray diffraction pattern (XRD) and Scanning electron microscopy (SEM). The formation mechanism of the hollow structure of the ZnO nanoparticles was also investigated. The technique developed here is expected to be useful in the preparation other metal oxides and hollow architectures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1224-1230
• /
• 2007

In this paper, we study the classification of defects at steam generator tube in nuclear power plant using eddy current testing (ECT). We consider 4 defect patterns of SG tube: I-In type, I-Out type, V-In type, and V-Out type. Through numerical analysis program based on finite element modeling, 400 ECT signals are generated by varying width and depth of each defect type. In order to improve the classification performance, we propose new feature extraction technique. After extracting new features from the generated ECT signals, multi-layer perceptron is used to classify the defect patterns. Through the computer simulation study, it is shown that the proposed method achieves 100% classification success rate while the previous method yields 91% success rate.