• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.121-129
• /
• 2007

This study was conducted to elucidate extraction efficiency by microwave technique in comparison with sonication technique for extraction of insecticide residue in pear. In the analysis of the extraction efficiency of microwave for a pear spiked with imidacloprid, the extraction efficiency by microwave power of 300 W with extraction temperature of $80^{\circ}C$, heating time of 1 to 3 minute was shown to be similar with the extraction time 20 minutes by sonication. The optimal condition. in consideration of economical condition and treatment time, for microwave extraction of imidacloprid in the pear were 300 watts of power supply, $100^{\circ}C$ of extraction temperature, 1 minute of heating time and 10 mL of acetone volume. A new microwave vessel was developed to rapidly process the sample of the insecticide imidacloprid residues in the pear. This vessel was designed to include a reaction chamber and a filtration equipment, and a gathering chamber. The system could curtail a pretreatment time to 21 minutes than sonication and 7.9 minutes than the previous microwave vessel.

• Journal of the Korean Society of Costume
• /
• v.49
• /
• pp.73-84
• /
• 1999

The purpose of this study was to investigate dyeing properties of silk and wool fabric by Cassia tora extracts according to the conditions such as extraction(temperature time) dyeing(temperature time) condition kinds of mordants temperature of mordanting. The color fastness of laundering irradiation were examined. The results were as follows: The wavelength of maximum absorpthion by extracts appeared at 201, 277, 382nm in UV-Vis spectrum. Absorbance of extracts were increased with temperature and time. The extraction efficiency of Cassia tora was determined as $95^\circ{C}$ of extraction temperature 120 minutes of extraction time. Silk fabric had highest K/S value when dyeing for 90min at $40^\circ{C}$. Wool fabric had highest K/S value when dyeing for 60min at $80^\circ{C}$. Surface color of silk and wool fabric dyed with Cassia tora extracts was 3,9Y and 0.4Y but it was changed from 9.3YR to 7,4Y and from 9.4YR to 5Y by mordants. The fabrics of mordanted by metal ion dyed the depth of color. Laundering and irradiation fastness of mordanted fabrics were improved as compared with nonmordanted fabrics.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.465-470
• /
• 2006

Walnut hull is a by-product from the Walnut tree, used as natural dyestuff from ancient times. This study was done to examine the effects of extractive conditions on the properties of walnut hull extracts for making efficient use of the walnut hull as a natural colorant. Aqueous extracts of walnut hull were prepared at various extractive concentration, temperature and time. Then they were characterized using UV-Vis. Spectrophotometer, FT-IR Spectrometer, Prep Liquid Chromatography, and Energy dispersive X-ray spectrometer. The aqueous extracts have two absorbency peaks of UV-Vis. Spectrum, shoulder type peak in the range of 270-280 nm and broad type band around 420 nm. Intensity of absorbency is increased with increase of extraction concentration and time. However, Boiling temperature extraction method showed the most efficiency of all. Intensity of absorbency is also affected by extraction pH. The Prep LC examined two kinds of isolated colorant with different molecular weight. FT-IR spectra of hull extracts showed an absorption band around $3400cm^{-1}$, the peaks at $1700-1600cm^{-1}$, which are characteristic of aromatic compounds with unsaturated ketone and benzene ring. It showed that the extraction contained some mineral ions, such as K, Ca, Si, Mg.

• Preventive Nutrition and Food Science
• /
• v.14 no.2
• /
• pp.129-133
• /
• 2009

Salicornia herbacea is rich in natural minerals, dietary fibers, and potentially health-promoting phenolic compounds. In this paper, an experimental design was applied for the optimization of the ultrasound-assisted extraction of phenolic compounds from lyophilized Salicornia herbacea powder. The experiments were conducted in accordance with a five-level, three-variable central composite rotatable design (CCRD), and the effects of solvent concentration, extraction time, and extraction temperature were evaluated via response surface methodology (RSM). The optimal extraction conditions were as follows: ethanol concentration, 76.80%; extraction time, 20 min; and extraction temperature, $33.21^{\circ}C$; and the solvent concentration was the most significant parameter in this process, under which the predicted total phenolic content was 49.91 mg GAE/g sample.

• Korean journal of food and cookery science
• /
• v.23 no.6
• /
• pp.954-960
• /
• 2007

The study was designed to determine optimum extraction conditions, by the factorial design of 3 variables and 3 levels using an a RSM program. To determine the optimal conditions for the extraction of black tea with chamomile, the experimental design was applied. The independent factors were the extraction temperature ($60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$), extraction time (2 min, 4 min, 6 min), and chamomile addition (0.3%, 1.0%, 1.7%). By the RSM (response surface methodology) analysis of the black tea with chamomile extraction, we found that the extraction temperature greatly affected the extraction yield, brix, pH, and reducing sugar, caffeine, theobromine and theophillin contents. The optimum extraction time, temperature, and chamomile content were 4 min, $90^{\circ}C$, and $1.6{\sim}1.7%$, respectively.

• The Korean Journal of Soil Zoology
• /
• v.5 no.2
• /
• pp.63-70
• /
• 2000

The effect of combinations of temperature, water column height and extraction time onthe efficiency of wet funnel extraction methods for enumerating Enchytraeids in a blanket bog peat soil from Moor House, Cumbria, England were investigated. The optimal conditions for extracting enchytraeids from this study were found to be a water surface temperature of 35$^{\circ}C$, with an extraction time of 6 hours, regardless of initial water temperature and water level in the extraction funnel. The original O'Connor method (40-45$^{\circ}C$ for 3 hours extraction and gradually increasing heating) yielding a high variation in the extraction efficiency, largely due to the comparatively higher temperature and shorter extraction time than this method. Attempts to extract without heat over longer periods showed very low extraction efficiencies for this highly organic blanket bog soil when compared with any of the heating wet funnel methods.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.824-829
• /
• 2002

Optimum conditions for gelatin extraction from chicken feet subjected to liming and neutralization processes were determined in terms of the effects of extraction temperature and time on the yield and physicochemical properties of gelatin using response surface methodology. The yield of gelatin increased with the increased extraction temperature and time, whereas viscosity and hardness only increased up to certain levels of temperature and time, and decreased thereafter. Based on the physicochemical properties, the optimum conditions for gelatin extraction were determined as $73^{\circ}C$ for 3 h 40 min.

• Journal of Ginseng Research
• /
• v.3 no.1
• /
• pp.40-53
• /
• 1979

In order to investigate the optimal conditions which affects to extraction of ginseng extract and saponin in ginseng extract, experiment was carried out varing with ethanol percentage, extraction time, temperature, sol$.$vent and Plant Parts. The results art as follows: 1. The amounts of ginseng saponin was increased according to increanation of ethanol Percentage while the amounts of ginseng extract was decreased. 2. The amounts of ginseng extract was increased as the prolongation of extraction time, on the ether hand, ginseng saponin contents increased lentil 40hr. and decreased after that. 3. By the raise of extract temperature, both of the amounts of ginseng saponin and ginseng extract was increased two times and four times. respectively. 4. The total amounts ginseng extract was obtained 22.86u when the water used as the extraction solvent, 11.28% on ethanol and 11.04U on methanol, in the order. and the saponin contents gained when the extraction solvents of water, methanol and ethanol 7.47%, 12.36% and 12.77%, respectively. 5. It showed 9.23% of ginseng extract in epidermis and 8.4% of ginseng saponin in tail Part of raw ginseng and in the case of dried ginseng, ginseng extract and saponin showed the most amounts in epidermis of 18.28% and 19.35%, respectively. 6. The ratio of panaxadiol and panaxatriol contents of ginseng saponin was almost same when it was extracted varing with ethanol percentage and extraction time (duration), and the more alcohol percentage and the longer extraction time increased, the more fractional content of ginseng saponin was extracted.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.542-547
• /
• 2017

Ultrasound-assisted extraction (UAE) has attracted growing interest, as it is an effective method for the rapid extraction of bioactive compounds from plants with a high extraction efficiency comparable to the conventional extraction. In this study, UAE was used for the extraction of polyphenols from lipid extracted microalgae (Tetraselmis KCTC 12236BP) and the effects of five extraction variables on the total phenolic compounds (TPC) were studied. For the optimization of extraction parameters, particle size, solid-to-liquid (L/S) ratio, ethanol concentration, extraction temperature and extraction time have been examined as independent variables. All variables exhibited the significant effects on the extraction of TPC and extraction temperature showed the most significant effect among five variables. The optimal extraction conditions were the extraction using mixed particle, S/L ratio of 10%, ethanol concentration of 60%, extraction temperature of $100^{\circ}C$ and extraction time of 30 min, which gave the 8.7 mg GAE/g DW for TPC. Compared with conventional hot-water extraction, TPC extraction under UAE was increased by up to 1.8 fold with same extraction condition. This study showed that UAE under low temperature and short extraction time was proven to be an effective extraction process for TPC production from LEA compared to conventional hot-water extraction process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.466-470
• /
• 2001

Response surface methodology was used for monitoring extraction conditions, based on quality properties of old pumpkin extracts. Hunter's color L value of extracts was maximized at 101℃, 2.6 hr and decreased gradually after maximum point. The polynomial equation for Hunter's color L value showed 10% of significance level and 0.8799 of R². Hunter's color a value was minimized at 117℃, 3.9 hr and R² of polynomial equation was 0.9852 within 1% significance level. Hunter's color b value and ΔE value increased as the extracting temperature and time increased. Extraction yield of old pumpkin was maximized at 110℃, 4 hr and increased in proportional to the extracting temperature and time, but decreased after 113℃ and 2 hr. Viscosity of pumpkin extracts were maximized at 120℃, nearly 3 hr. R² of polynomial equations for yield, viscosity and sugar content were 0.9532, 0.9812 and 0.8869, respectively. Optimum ranges of extraction conditions for quality properties of old pumpkin were 102∼109℃, 2.5∼3.5 hr, respectively. Predicted values at the optimum extraction condition agreed with experimental values.