• 청정기술
• /
• 제22권4호
• /
• pp.250-257
• /
• 2016

As an attempt to replacing petroleum-based chemicals with bio-based ones, synthesis of furfural from biomass-derived xylose attracts much attention in recent days. Conventionally, furfural from xylose has been produced via the utilization of highly corrosive, toxic, and environmentally unfriendly mineral acids such as sulfuric acid or hydrochloric acid. In this study, microwave-assisted biphasic reaction process in the presence of novel bio-based heterogeneous acid catalysts was developed for the eco-benign and effective synthesis of furfural from xylose. The microwave was irradiated for reaction acceleration and a biphasic system consisting of $H_2O$ : MIBK (1 : 2) was designed for continuous extraction of furfural into the organic phase in order to reduce the undesired side products formed by decomposition/condensation/oligomerization in the acidic aqueous phase. Moreover, sulfonated amorphous carbonaceous materials were prepared from wood powder, the most abundant lignocellulosic biomass. The prepared catalysts were characterized by FT-IR, XPS, BET, elemental analysis and they were used as bio-based heterogeneous acid catalysts for the dehydration of xylose into furfural more effectively. For further optimization, the effect of temperature, reaction time, water/organic solvent ratio, and substrate/catalyst ratio on the xylose conversion and furfural yield were investigated and 100% conversion of xylose and 74% yield of furfural was achieved within 5 h at $180^{\circ}C$. The bio-based heterogeneous acid catalysts could be used three times without any significant loss of activity. This greener protocol provides highly selective conversion of xylose to furfural as well as facile isolation of product and bio-based heterogeneous acid catalysts can alternate the environmentally-burdened mineral acids.

• 한국식품과학회지
• /
• 제8권2호
• /
• pp.90-94
• /
• 1976

염도(鹽度)와 숙성온도(熟成溫度)가 다른 김치중(中)의 휘발성(揮發性) 유기산(有機酸)의 조성과 이산화탄소의 양(量)을 비교(比較)하였다. 1. 숙성적기(熟成適期)의 김치에 존재(存在)하는 휘발성(揮發性) 유기산(有機酸)은 formic, acetic acid이다. 2. 이산화탄소는 주(主)로 발효초기(醱酵初期)에 생성(生成)되며 후기(後期)에는 증가(增加)가 없다. 3. 1.02% NaCI 김치가 3.16% NaCI 김치보다, $4-5^{\circ}C$ 김치가 $20-22^{\circ}C$ 김치보다 acetic caid와 이산화탄소 함량(含量)이 많다. 4. 염도(鹽度)가 낮고 숙성온도(熟成溫度)가 낮은 김치에는 acetic acid와 이산화탄소의 함량(含量)이 많아 김치 맛이 더 좋은 것 같다.

• KSBB Journal
• /
• 제25권5호
• /
• pp.421-428
• /
• 2010

본 논문은 복합흡수제를 이용하여 유해가스를 처리하기 위해 식물정유의 주요구성성분을 파악한 식물정유로 황화수소가스의 처리효율을 규명하고자 하였다. 또한 복합흡수제와 황화수소가스에 의한 제거반응을 위한 적정조건을 분석하였으며 그 결과는 아래와 같이 요약 할 수 있다. 1) 황화수소가스는 중화반응으로 처리하고 져 할 경우, 식물정유의 화학구조에서 알코올기, 알데히드기, 에스터기 등이 중화반응에 관여한다. 실험결과 앞서 언급한 화학작용기가 포함되어 있는 경우에 아민계열의 2-아미노에탄올 및 식물정유의 복합흡수제와 황화수소 가스와의 중화반응으로 염을 형성하여 유해가스 제거효율이 98%에 도달한다. 2) 황화수소가스를 제거하는 중화반응의 경우에 온도와 pH에 따라 처리효율이 크게 달라졌다. 높은 온도보다는 낮은 온도에서 제거효율이 거의 98%이상 나타났다. 적정 pH는 중성영역에서 비교적 처리효율을 확인하였다. 3) 황화수소가스의 처리효율은 초기농도에 따라 처리효율이 크게 차이가 나타났다. 황화수소의 초기농도가 1,100 ppm 이상인 경우에 처리효율은 40%로 나타났다. 반면, 240 ppm 이상인 경우에는 10분이내에 황화수소 가스 처리 효율이 90%이상 처리되는 것으로 나타났다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권2호
• /
• pp.47-54
• /
• 2015

The objective of this study was to optimize the experimental conditions for bioleaching of arsenic (As) using Herbaspirillum sp. GW103 and to understand the interaction between bacteria and As during bioleaching. Five variables, temperature, time, CaCO₃, coconut oil cake, and shaking rate, were optimized using response surface methodology (RSM) based Box-Behnken design (BBD). Maximum (73.2%) bioleaching of As was observed at 30℃, 60 h incubation, 1.75% CaCO₃, 3% coconut oil cake, and 140 rpm. Sequential extraction of bioleached soil revealed that the isolate Herbaspirillum sp. GW103 significantly reduced 28.6% of water soluble fraction and increased 38.8% of the carbonate fraction. The results of the study indicate that the diazotrophic bacteria Herbaspirillum sp. could be used for bioleaching As from mine soil.

• Natural Product Sciences
• /
• 제16권2호
• /
• pp.116-122
• /
• 2010

A high-performance liquid chromatography (HPLC) with diode array detector (DAD) and electrospray ionization mass spectrometry (ESI-MS) was established for the simultaneous determination of five representative metabolites of the iridoid and phenolic classes from Rehmannia glutinosa. The optimal chromatographic conditions were obtained on an ODS column (5 mm, $4.6{\times}250\;mm$) with the column temperature at $25^{\circ}C$. The mobile phase was composed of water and acetonitrile using a gradient elution with the flow rate 0.3 mL/min. Detection wavelength was set at 205 nm. All calibration curves showed good linear regression ($r^2$ > 0.997) within test ranges. Limits of detection (LOD) and quantitation (LOQ) values were lower than 0.123 and $0.373\;{\mu}g/mL$, respectively. The developed method provided satisfactory precision and accuracy with overall intra-day and inter-day variations of 0.09 - 0.76% and 0.16 - 1.41%, respectively, and the overall recoveries of 99.03 - 102.67% for all of the compounds analyzed. In addition, effectiveness of diverse extraction methods was compared to each other for the development of standard analytic method. The verified method was successfully applied to the quantitative determination of five representative metabolites in twenty-one commercial Rehmannia glutinosa samples from different markets in Korea and China. The analytical results showed that the contents of the five analytes vary significantly with sources.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.75-83
• /
• 2001

The potential of oxygen delignification is a powerful tool to reduce detrimental environmental effects. This study was performed to investigate the effect of steam explosion treatment of chemically treated oak wood on oxygen-alkali pulping. Pulp yield during steam explosion treatment by ${Na_2}{O_3}$-NaOH impregnation was higher than the other impregnation chemicals. Also, NaOH extraction at room temperature after steam explosion treatment improved the kappa number from 140~116 to 90~64. Oxygen-alkali pulping of chemical steam explosion treated woods affected to pulp yields. ${Na_2}{O_3}$-NaOH impregnation was very effective to higher carbohydrate yields at same delignification level. Its carbohydrate yield seemed to be highly related to the effluent pH. Oxygen-alkali pulping after steam explosion treatment of ${Na_2}{O_3}$-NaOH impregnated wood was shown that carbohydrate yield was very high because its effluent pH was increase from natural to mild alkali. Even if oxygen bleaching limit the delignification to 50% in order to avoid unacceptable yield and viscosity losses, oxygen-alkali pulping after steam explosion by ${Na_2}{O_3}$-NaOH impregnation was possible to extend the delignification more than 80%. Considering high pulp yield with lower lignin content from steam explosion treated wood, it might be profitable to end the cook at a high kappa number instead of a low kappa number, and continuously apply the oxygen delignification, in order to better quality pulp.

• 한국약용작물학회지
• /
• 제14권1호
• /
• pp.45-48
• /
• 2006

순무는 초음파 병행 추출을 통하여 $60,\;100^{\circ}C$에서 모두 추출 수율을 증가시킬 수 있음을 확인하였다. 알코올 분해 효소인 ADH와 Aldehyde 분해 효소인 ALDH의 분해 활성 측정 실험을 통해 순무의 추출물들은 물 일반 추출물보다 초음파 병해 추출물들이 높은 활성을 나타내는 것을 확인하였고 특히 ADH의 활성율 보다 ALDH의 활성이 높게 나타나 알코을 분해 과정의 최종 목적지인 acetic acid와 이산화탄소로의 분해에 순무의 추출물들이 유의적인 활성을 나타내고 있음을 확인할 수 있었다. $60^{\circ}C$ 열수 추출물은 $100^{\circ}C$ 열수 추출물과 비교하여 관능평가 시 높은 점수를 얻었으며 이의 추출물들은 감압농축을 통해 이취의 제거가 이루어져 열수추출 시 유용한 방법으로 평가되었다.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.592-595
• /
• 2011

It is well known that modified 9Cr-1Mo steel has a low thermal expansion and high thermal conductivity with excellent high temperature properties compared to austenitic stainless steel. For these advantages, the steel is very popular for the boiler tube of thermal power plants. Normalizing is commonly utilized to obtain martensite in this steel, which shows an unusual toughness for martensite. However, some accidents related to this steel have been reported recently, opening the necessity for further study. As a particular behavior of the steel, an abrupt drop of the impact value has been identified upon tempering at 750$^{\circ}C$ for about 1 hour. It is well known that $Fe_3C$ forms during autotempering and turns to $Cr_2C$ at an early stage and then transforms to $Cr_{23}C_6$. In this study, the cause of the abrupt drop of the impact value was investigated with an impact test, microstructural observation, nanodiffraction and phase analyses using instruments such as optical and transmission electron microscopes (TEM) with an extraction carbon replica of the carbides. The analyses revealed that the $M_2C$ that formed when retained for about 1 hour at 750$^{\circ}C$ causes a drastic decrease in the mechanical properties. The sharp drop in mechanical properties, however, disappeared as the $M_2C$ transformed into $M_{23}C_6$ with longer retention.

• 자원리싸이클링
• /
• 제13권4호
• /
• pp.32-38
• /
• 2004

중유의 대체연료로서 관심을 받고있는 오리멀젼회로부터 바나듐을 회수하기 위한 기초연구로서 오리멀젼회의 물성과 침출특성에 관한 연구를 수행하였다. 오리멀젼회는 16%의 바나듐, 4%의 니켈 그리고 9%의 황을 함유하고 있으며 $d_{50}$이 5.9$mu extrm{m}$로 미세한 분말이었다. 오리멀젼회 중의 금속성분이 황산염 형태로 존재하기 때문에 바나듐은 수 침출이 용이하고 침출시간도 10분 이하로 짧았다. 수침출 시 반응온도가 높으면 침출율이 감소하는데 이는 V(V)이 가수분해되어 $V_2$$O_{5}$로 침전되기 때문이다. 한편 황산을 첨가하면 바나듐의 침출율을 높일 수 있었다. 바나듐의 선택적 침출을 위한 알카리 침출의 경우 침출율을 높이기 위하여는 산화제의 사용이 필요하며 과산화수소가 적당하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.232-232
• /
• 2010

Recently light emitting diodes (LEDs) have been expected as the new generation light sources because of their advantages such as small size, long lifetime and energy-saving. GaN, as a wide band gap material, is widely used as a material of LEDs and GaN nanorods are the one of the most widely investigated nanostructure which has advantages for the light extraction of LEDs and increasing the active area by making the cylindrical core-shell structure. Lately GaN nanorods are fabricated by various techniques, such as selective area growth, vapor-liquid-solid (VLS) technique. But these techniques have some disadvantages. Selective area growth technique is too complicated and expensive to grow the rods. And in the case of VLS technique, GaN nanorods are not vertically aligned well and the metal catalyst may act as the impurity. So we just tried to grow the GaN nanorods on Si substrate without catalyst to get the vertically well aligned nanorods without impurity. First we deposited the AlN buffer layer on Si substrate which shows more vertical growth mode than sapphire substrate. After the buffer growth, we flew trimethylgallium (TMGa) as the III group source and ammonia as the V group source. And during the GaN growth, we kept the ammonia flow stable and periodically changed the flow rate of TMGa to change the growth mode of the nanorods. Finally, as the optimization, we changed the various growth conditions such as the growth temperature, the working pressure, V/III ratio and the doping level. And we are still in the process to reduce the diameter of the nanorods and to extend the length of the nanorods simultaneously. In this study, we focused on the shape changing of GaN nanorods with different growth conditions. So we confirmed the shape of the nanorods by scanning electron microscope (SEM) and carried out the Photoluminescence (PL) measurement and x-ray diffraction (XRD) to examine the crystal quality difference between samples. Detailed results will be discussed.