• 제목/요약/키워드: extraction solvent

검색결과 1,665건 처리시간 0.026초

Solvent Extraction of Ni(II) from Strong Hydrochloric Acid Solution by Alamine336

  • Lee, Man-Seung;Nam, Sang-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권1호
    • /
    • pp.113-116
    • /
    • 2011
  • Slope analysis method was applied to determine the stoichiometry of the solvent extraction reaction of Ni(II) by Alamine336 from strong HCl solution range from 1 to 10 M. Solvent extraction data was obtained from the literature. The effective equilibrium constant for the solvent extraction reaction was estimated by considering the ionic equilibria of $NiCl_2$ in the HCl solution. The measured distribution coefficients of Ni(II) agreed well with those calculated in this study. Our results suggest that further study on the measurement of the activities of nickel complexes at high HCl solution need to be done.

다양한 용액으로부터 용매추출에 의한 금과 은의 분리 (Separation of Gold and Silver from Diverse Solutions by Solvent Extraction)

  • 행위동;이만승
    • 자원리싸이클링
    • /
    • 제26권5호
    • /
    • pp.3-11
    • /
    • 2017
  • 금과 은은 귀금속으로 첨단소재를 제조하는데 사용된다. 용매추출은 다양한 침출용액으로 부터 순수한 금과 은을 회수할 수 있는 중요한 공정이다. 본 논문에서는 cyanide, thiocyanate, thiosulfate, thiourea과 염산용액에서 금(I, III)과 은(I)의 용액화학 및 용매추출에 의한 분리를 고찰했다. 여러 단독 및 혼합추출제에 의한 금(I, III)과 은(I)의 용매추출 및 분리거동을 각 침출용액에서 추출반응과 추출제의 선택도를 토대로 비교했다. 염산용액이 용매추출에 의한 금과 은의 분리의 효율측면에서 적당하다.

반응표면분석법에 의한 맥문동 열수추출 조건의 최적화 (Optimization for Hot water Extraction Condition of Liriope spicata Tuber Using Response Surface Methodology)

  • 김순동;구연수;이인자;박인경;윤광섭
    • 한국식품저장유통학회지
    • /
    • 제8권2호
    • /
    • pp.157-163
    • /
    • 2001
  • Optimal conditions for hot water extraction of Liriope spicata tuber were investigated with changes in solvent ratio(2∼6 fold) and heating time(1∼5 hr) by response surface methodology. The content of extractable solids increased with an increased in solvent ratio, and the highest content showed at heating time of 3 hr. The content of total steroid saponin increased with a decrease in solvent ratio, and increased with an increase in heating time at increasing the solvent ratio. The content of non-reducing sugar containing oligosaccharides at a lower solvent ratio didn’t show changes depending on heating time, while that at a higher ration decreased with an increase in heating time. Optimal extraction conditions using hot water as the limited conditions of 15∼18% extractable solids, 1.5∼2.0% total steroid saponin, 6∼8% reducing sugar, 6∼7% non-reducing sugar and 13∼15 brix were 3 hrs of heating time and 4 fold of solvent ratio.

  • PDF

바이오매스로부터 파클리탁셀 회수를 위한 전통적 용매 추출, 마이크로웨이브를 이용한 추출, 초음파를 이용한 추출 방법 비교 (Comparison of Conventional Solvent Extraction, Microwave-Assisted Extraction, and Ultrasound-Assisted Extraction Methods for Paclitaxel Recovery from Biomass)

  • 김진현
    • Korean Chemical Engineering Research
    • /
    • 제58권2호
    • /
    • pp.273-279
    • /
    • 2020
  • 본 연구에서는 바이오매스로부터 파클리탁셀 회수를 위한 전통적 용매 추출(conventional solvent extraction, CSE), 마이크로웨이브를 이용한 추출(microwave-assisted extraction, MAE), 초음파를 이용한 추출(ultrasound-assisted extraction, UAE) 방법을 비교하였다. 추출 용매 종류(아세톤, 클로로포름, 에탄올, 메탄올, 메틸렌 클로라이드)에 따른 영향을 조사한 결과, 메탄올이 모든 추출 방법에서 가장 적합하였다. 메탄올을 이용한 MAE와 UAE의 경우, 단 1회의 추출로 대부분의 파클리탁셀 회수(>95%)가 가능하였다. 또한 MAE와 UAE의 경우 추출 온도(25-45 ℃), 마이크로웨이브 파워(50-150 W), 초음파 파워(180-380 W)의 증가에 따라 파클리탁셀 회수율이 증가하였다. 또한 SEM 분석을 통해 바이오매스 표면을 조사한 결과, 표면 구조가 CSE의 경우에는 조금 주름진 형태를 보인 반면 MAE와 UAE의 경우에는 강한 충격으로 매우 거칠고 파괴된 형태를 보였다.

LCD 제조공정에서의 폐용매 분리처리를 위한 공정 설계 (Design of Waste Solvent Treatment Process from LCD Manufacturing Process)

  • 윤문규;이문용
    • 청정기술
    • /
    • 제14권4호
    • /
    • pp.275-280
    • /
    • 2008
  • 연구에서는 LCD 제조 공정에서 배출되는 스트리퍼와 디벨로퍼 혼합 폐액(SD폐액)과 스트리퍼 폐수의 효과적 분리 및 처리를 위한 가능한 기술로서 추출공정과 증류공정의 기술적/경제적 타당성을 검토하였다. SD폐액과 스트리퍼 폐수의 추출분리를 위한 용매로 $CHCl_3$가 여러 가지 관점에서 가장 적절한 용매로 확인되었다. 또한 SD폐액 분리 회수를 위한 공정으로서 추출공정과 증류공정의 두 가지 공정에 대하여 정밀 전산모사를 수행한 결과 $CHCl_3$를 이용한 추출분리공정이 단순증류공정보다 6배 정도 에너지 소요비용이 적게 소요됨을 확인할 수 있었다.

  • PDF

밀랍도포한지의 탈랍을 위한 최적 유기용매 추출기법 탐색 (Optimal Organic Solvent Extraction Method for Dewaxing of Beeswax-treated Hanji)

  • 최도침;최은연;조병묵;조병욱
    • 펄프종이기술
    • /
    • 제44권6호
    • /
    • pp.50-57
    • /
    • 2012
  • In this study, the beeswax extraction methods using organic solvents were examined to develop a optimal dewaxing technology for beeswax-treated Hanji. Thermally-aged beeswax-treated Hanji was dewaxed using four types of extraction methods including dipping, Soxhlet extraction, ultrasonic washing and shaking methods. Then, the aging stability of the dewaxed Hanji was evaluated in terms of variations in paper strength and in the color of the printed area with muk. The experimental results suggested that the dewaxing methods allowing solvent to flow during extraction showed superior extraction efficiency. The dipping method in which the organic solvent does not flow showed the slowest extraction rate of beeswax compared to three other methods. In terms of variations in tensile strength and folding endurance, however, no obvious differences in the aging stability were observed amongst these four extraction methods. Regarding the aging stability in terms of the color of the printed area with muk, Soxhlet extraction method showed the best performance of dewaxing.

초임계 이산화탄소와 에탄올 보조용매를 이용한 포도씨로부터의 페놀성 화합물의 추출 (Extraction of Phenolic Compounds from grape Seed Using Supercritical $CO_2$ and Ethanol as a Co-solvent)

  • 이원영;장규섭;최용희
    • 한국식품저장유통학회지
    • /
    • 제7권2호
    • /
    • pp.177-183
    • /
    • 2000
  • A supercritical fluid extraction was performed for the extraction of phenolics from grape seeds which up to now have been discarded. The optimum condition for extraction process was predicted through response surface methodology using central composit experimental design. The extraction amount of grape seed phenolics was increased by increasing extraction temperature, pressure, and concentration of co-solvent (ethanol). The optimum extraction conditions were 84.83$^{\circ}$C, 51.50MPa and 1.27% ethanol. The yield of phenolics using SFE was higher with 3 folds than ethanol and 4 folds than hexane but less than 80% methanol. In the respects of food poisoning, the approved solvents were restricted to ethanol and hexane. So, SFE for extraction of phenolics could be powerful alternative method for solvent extraction.

  • PDF

Acrylic Acid의 반응추출에 미치는 용매의 영향 (Effect of Solvents on Reactive Extraction of Acrylic Acid)

  • 이상훈;신정호
    • 한국환경과학회지
    • /
    • 제7권6호
    • /
    • pp.753-759
    • /
    • 1998
  • In physical and reactive extraction of acrylic acid using various solvents the equilibrium characteristics of extraction were investigated. The degree of extraction in reactive extraction with Tri-n-octylamine(TOA) was 1.5~3 times than that in physical extraction. Distribution ratio was constant in methyl isobutyl ketone(MIBK) and n-butylacetate(n-BAc) but was increased with increasing the concentration of acrylic acid in benzene and chloroform. It can be explained by formation of dimers. Maximum extraction leadings of acrylic acid were three in benzene and were two in MIBK, chloroform and n-BAc, and it was found that acrylic acid was extracted as the form of $A_3$R In benzene and $A_2R$ in MIBK, chloroform and n-BAc. In effect of solvent, the degree of extraction was increased as he difference of solubility parameter of solvent and solute was decreased, and as dielectric constant of solvent was increased.

  • PDF

토종콩에 포함된 비배당체 이소플라본의 추출 방법 비교 (Comparison of Extraction Methods for Aglycone isoflavones from Korean Soybean)

  • 이광진;노경호
    • KSBB Journal
    • /
    • 제19권6호
    • /
    • pp.421-426
    • /
    • 2004
  • 토종콩으로부터 비배당체 이소플라본을 추출하기 위한 다양한 기계적 및 화학적 방법을 적용하였다. 용매추출법의 침적과 교반, 초음파에너지와 아임계/초임계 수 추출이 포함되었다. 용매의 조성에 의한 추출효율의 증가, 교반에 의한 특정성분의 추출효과의 증대, 초음파에너지에 의한 추출성능의 개선, 용매보다 용해력이 좋은 초임계유체의 적용에 관한 실험을 수행한 결과에 의하면 비배당체 이소플라본의 추출은 초음파에너지에 의한 것이 가장 우수하였다.

초피 Oleoresin 제조시 용매에 따른 추출물특성과 추출조건에 따른 휘발성 성분 변화 (Properties of Chopi Oleoresin Extracted with Various Solvents and Effects of Extraction Conditions on Volatile Components)

  • 최용희;허상선;배동호;김상욱
    • 한국식품영양과학회지
    • /
    • 제27권3호
    • /
    • pp.406-412
    • /
    • 1998
  • Such extraction conditions as the kinds of solvent, extracting temperature, extracting time, ratio of material to solvent and particle size of material, were studied to maximize the extraction of oleoresin from chipi. Larger amount of soluble solids were extracted from seeds with nonpolar solvents (hexane, pentane, ether) for extraction, because the seeds contained large amount of crude fats and monoterpene(limonene) volatile compounds. Larger amount of soluble solids were extracted from peel with polar solvents(methanol, ethanol) of extraction because of large amount of water soluble colors, sugars and oxygenated terpene bolatile compounds in the peel. The application of the solvents in intermediate polarity (dichloromethane, acetone) resulted in more effective extraction of soluble solid and volatile compounds. Expecially, dichloromethane was an excellent solvent in extraction of volatile compounds. In the concern of volatile compound recovery yield, the optimum extraction conditions, such as temperature, time, mixing ratio of material to dichloromethane and mean particle size, were $25^{\circ}C$, 10min, 1:10(w/v), 355~250${\mu}{\textrm}{m}$ for chopi peels and 3$0^{\circ}C$, 10min, 1:8(w/v), 355~250${\mu}{\textrm}{m}$ for chopi seeds, respectively.

  • PDF