• Korean Journal of Food Science and Technology
• /
• v.39 no.3
• /
• pp.276-282
• /
• 2007

In this study, attempts were made to develop a garlic juice extraction method that would result in minimum changes in quality. Protopectinase and a mutienzyme containing cellulase, pectinesterase, ${\beta}-glucanase$, etc. were applied to garlic residue after first extraction, and the yields of garlic juice and the flavor component changes of the juices were investigated. Enzyme concentrations of 0.04, 0.08, and 0.12% which were based on pulp weight before extraction were added and allowed to hydrolyze for 30, 60, 90 and 120 min,. respectively. Increase in the garlic juice yield was observed according to the amount of enzyme added and the reaction time until reaching a maximum point. When 0.12% protopectinase was applied to the garlic residue for 90 min, the yield increased by 13.8%. Under the same conditions, when multienzyme was applied to the garlic residue, the yield increased by 14.5%, which was considered the maximum. The flavor compounds decreased when compared with the total GC peak area of garlic juice prepared without enzymes(control). The volatile flavor compounds in garlic juice prepared with 0.12% protopectinase for 60 min decreased by 6%. The free sugars profile of the garlic juice prepared with 0.12% protopectinase for 60 min was similar to that of the control. The type of enzyme used did not affect the free amino acid profile of the garlic juice. These results indicate that the optimum conditions for extraction of garlic juice are hydrolyzing the residue with 0.12% protopectinase for 60 min, extracting garlic juice from the hydrolyzed reside, and then combining the extracted juice with the first extraction.

• Korean Journal of Veterinary Service
• /
• v.28 no.3
• /
• pp.285-294
• /
• 2005

This study was conducted to investigate the extraction method for the determination of organochlorine, organophosphorus and synthetic pyrethroid pesticide residues in beef fat by gas chromatography-mass selective detector(GC-MSD). Twenty one pesticide residues in fat were determined using a simple and rapid procedure based on solid- phase extraction(SPE) clean-up cartridges with octadecyl $(C_{18})-bonded$ porous silica, florisil, $10\%$ deactivated florisil. a tandem $C_{18}$ and florisil and a tandem $C_{18}$ and $10\%$ deactivated florisil. Solvent-solvent extraction using acetonitrile was not satisfied to eliminate fat interference for pesticide residue analysis by GC-MSD, and the recoveries of the method in fat ranged from 16.2 to $57.3\%$ except DDT$(83.2\%)$. The recoveries of SPE methods using a tandem $C_{18}$ and Florisil was $59.6\~123.8\%$ except fenitrothion $(135.2\%)$. the SPE method was verified the satisfactory performance of pre-treatment for pesticide residues analysis in fat by GC-MSD. The efficiency of florisil deactivated with $10\%$ water has been not proved significantly on recoveries of pesticide residues in fat.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.5
• /
• pp.860-865
• /
• 1997

Investigations were performed on the effects of extraction temperature, pressure, time on solubility and selectivity of egg yolk lipid and cholesterol, and color and fatty acid composition of the residue in supercritical carbon dioxide(SC-Co$_2$) extraction. Lipid and cholesterol solubility increased as the increase of Co$_2$ density and was found to strongly depend on the extraction pressure rather than the extraction temperature. The relative concentration of cholesterol in the extract increased with an increase in temperature and decreased with an increase in pressure and extraction time. extraction of dried eg yolk for 3hr at 4$0^{\circ}C$/276 bar removed 46.1% of cholesterol from the residual egg yolk with a yield of 63.2%. SC-Co$_2$ extraction produced a lighter color egg yolk with less redness and yellowness. As the extraction time increased, the resultant residual egg yolk became more saturated with fatty acids. SC-$CO_2$ extraction offers a safe, natural method for removing cholesterol from dried egg yolk.

• Korean Journal of Pharmacognosy
• /
• v.50 no.3
• /
• pp.165-174
• /
• 2019

Oregonin is known as a representative active substance of plants of the Alnus species. In this study, we will show the results of establishing a method for extracting trace amounts of useful substances in plants. Additionally, a variety of physiological activity studies were conducted with extracts containing high content of useful substances. In this study, anti-oxidant, anti-inflammatory and anti-allergic activities of supercritical fluid residue 60% EtOH extracts of Alnus sibirica (ASCFR) were investigated in vitro. To explore anti-oxidant and anti-inflammatory characteristics of supercritical extract, DPPH radical scavenging, and ABTS radical scavenging activity, inhibition of nitric oxide production in LPS-stimulated RAW 264.7 cells and ${\beta}$-hexosaminidase release in IgE-stimulated RBL-2H3 cells were examined, respectively. Results showed a concentration-dependent increase in DPPH and ABTS radical scavenging activity. Cells stimulated with LPS produced more nitric oxide than normal control cells. However, cells treated with supercritical fluid residue 60% EtOH extract decreased production in a concentration-dependent manner. In anti-allergic activity studies, ASCFR showed concentration-dependentanti-allergic activity. Based on results and strong antioxidant activity, ASCFR has potential as basic research materials for development of therapeutic supplements-based medicines or functional cosmetics related to chronic inflammatory skin immunity diseases.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.488-493
• /
• 2001

The know the possibility in development of the low-fat beef patty models using crucian carp9 extraction residues (CCER, freeze dried powder : 5%, 10%, 15%), those protein nutritional quality, texture, color and sensory properties were investigated. About 13∼23% (on dry basis) of lipid in control was reduced in cooked beef patties with the higher addition ratios of CCER. In vitro protein digestibility was not changed in raw patties before cooking but 2∼4% higher digestibility was revealed in cooked patties. Computed protein efficiency ratio (C-PER) and discriminant computed protein efficiency ratio (DC-PER) of beef patties containing CCER were almost same as control. Lightness and red color value of both (raw and cooked) beef patties were decreased with the higher CCER addition ratios but brown color value of cooked samples were similar to control. Stronger hardness was noted in all beef patties containing CCER significantly (p<0.05). Consumer's acceptability were generally decreased by addition of CCER, but 10% level could be recommendable in beef patty processing.

• Journal of Pharmaceutical Investigation
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1979

This report is carried out pharmaceutical properties for the mosquito coil made of Ginseng leaf and the residue after extraction of Ginseng root. This experimental results are: Loss on drying of Insam (Ginseng) mosquito coil powder is average 8.31%, ash content of the powder is average 9.51% and burning time of Insam mosquito coil is aprroximately 36 minutes per gram. The contents of carbon monoxide and carbon dioxide on burning of mosquito coil are as same as following: Insam mosquito coil A brand mosquito coil B brand mosquito coil Allethrin in a piece of Insam mosquito coil was stable under the experimental conditions. CO (ppm) 360 540 760 $CO_2(%)$ 0.052 0.076 0.066 Allethrin in a piece of Insam mosquito coil was stable under the experimental conditions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.44-49
• /
• 2013

Hydrogen penetration into a metal leads to damages and mechanical degradations and its content measurement is of importance. For a precise measurement, a sample preparation procedure must be optimized through a series of studies on sample washing and drying. In this study, two-step washing with organic solvents and thermal soaking in inert gas were tried with a rod-shaped, API X65 steel sample. The samples were machined from a steel plate and then washed in acetone and etyl-alcohol for 5 minute each and dried with compressed air. After then, the samples were thermally soaked in a home-made nitrogen gas chamber during 10 minute at different heat gun temperatures from 100 to $400^{\circ}C$ and corresponding temperature range in the soaking chamber was from 77 to $266^{\circ}C$ according to the temperature calibration. Hydrogen residue in the samples was measured with a hot extraction system after each soaking step; hydrogen residue of $0.70{\pm}0.12$ wppm after the thermal soaking at $77^{\circ}C$ decayed with increase of the soaking temperature. By adopting the heat transfer model, decay behavior of the hydrogen residue was fitted into an exponential decay function of the soaking temperature. Saturated value or lower bound of the hydrogen residue was 0.36 wppm and chamber temperature required to lower the hydrogen residue about 95% of the lower bound was $360^{\circ}C$. Furthermore, a thermal desorption spectroscopy was done for the fully soaked samples at $360^{\circ}C$. Weak hydrogen peak was observed for whole temperature range and it means that hydrogen-related contaminants of the sample surface are steadily removed by heating. In addition, a broad peak found around $400^{\circ}C$ means that parts of the hydrogen residue are irreversibly trapped in the steel microstructure.

• Journal of the Korean Chemical Society
• /
• v.63 no.5
• /
• pp.335-341
• /
• 2019

Spirulina was cultured in Selenium solution and the total concentration was determined with isotope dilution technique. Low-molecular-weight-Selenium species for the water extract of Spirulina were separated and quantified with HPLC ICP/MS. Water extraction was used first and then protein enzyme (protease XIV) was used to digest and extract for the Se species in both water extract and residue. The total Se was $414.9{\pm}4.0{\mu}g\;g^{-1}$ and 77% existed in water extract while 22% remained in residue. Se species in supernatant was mostly inorganic selenate ($222.7{\mu}g\;g^{-1}$). After hydrolysis of protein, SeCys ($15.20{\mu}g\;g^{-1}$) and SeMet ($12.13{\mu}g\;g^{-1}$) were found. In residue, SeCys and SeMet were found with little inorganic Se. After protein hydrolysis of residue, more of Selenoamino acids SeCys ($9.35{\mu}g\;g^{-1}$) and SeMet ($18.23{\mu}g\;g^{-1}$) in addition to MeSeCys ($1.5{\mu}g\;g^{-1}$) were found. It is thought that inorganic selenium is mostly adsorbed on the surface of spirulina and can be easily removed by a simple distilled water extraction while most of organo-seleniums are remained in residue.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2926-2936
• /
• 2021

Rare-earth (RE) industries generate a massive amount of radioactive residue containing high thorium concentrations. Due to the fact that thorium is considered a non-economic element, large volume of these RE processed residues are commonly disposed of without treatment. It is essential to study an appropriate treatment that could reduce the volume of waste for final disposition. To this end, this research investigates the applicability of carbon-based adsorbent in separating thorium from aqueous phase sulphate is obtained from the cracking and leaching process of solid rare-earth by-product residue. Adsorption of thorium from the aqueous phase sulphate by carbon-based electrodes was investigated through electrosorption experiments conducted at a duration of 180 minutes with a positive potential variable range of +0.2V to +0.6V (vs. Ag/AgCl). Through this research, the specific capacity obtained was equivalent to 1.0 to 5.14 mg-Th/g-Carbon. Furthermore, electrosorption of thorium ions from aqueous phase sulphate is found to be most favorable at a higher positive potential of +0.6V (vs. Ag/AgCl). This study's findings elucidate the removal of thorium from the rare-earth residue by carbon-based electrodes and simultaneously its potential to reduce disposal waste of untreated residue.

• The Journal of Natural Sciences
• /
• v.5 no.2
• /
• pp.63-73
• /
• 1992

There are many methods of obtaining butadiene described in the literature. In the america it is produced largely from petroleum gases, i.e., by catalytic dehydrogenation of butene of butene-butane mixtures. Butadiene can be recovered from the $C_4$ residue of an olefin plant by distilling off a fraction containing most of the butadiene, catalytically hydrogenating the higher acetylenes to olefins and separating the product from other olefins and isobutane by extraction. Also it can be obtained by cracking naphtha and light oil. Among the individual dienes of commercial importance, 1, 3-butadiene is of first importance. It is used primarily for the production of polymers.In the present paper, it was investigated for a effect of the formation and the growth inhibition of popped corn polymer in butadiene extraction unit. As a result of study, inhibitors, $NaNO_2$ and TBC were good effective for inhibition of the formation and growth in popcorn polymer. The rational formula of popcorn polymer obtained was $(C_4H_6)_x$.