• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.574-577
• /
• 2017

In Indonesia, vetiver oil is one commodity that plays an important role in the country's foreign exchange earnings. Currently, the extraction of essential oil from vetiver still uses conventional methods. Therefore, the aim of this study was to know and verify the kinetics and mechanism of microwave hydrodistillation of vetiver based on two models. In this study, microwave hydrodistillation was used to extract essential oils from vetiver. The extraction was carried out in nine extraction cycles of 20 min to 3 hours. The rate constant, the equilibrium extraction capacity, and the initial extraction rate were calculated using the two models. Kinetics of oil extraction from vetiver by microwave hydrodistillation proved that the extraction process was based on the second-order extraction model. The second-order model was satisfactorily applied, with high coefficients of correlation ($R^2=0.9427$), showing that it well described the process.

• Journal of Environmental Science International
• /
• v.9 no.2
• /
• pp.159-164
• /
• 2000

For the purpose of development of a liquid membrane permeator which separates metal ions from aqueous solutions continuously and effectively, a continuous membrane permeator with the membrane solution trapped between extraction and stripping phases by two micro-porous hydrophilic films was manufactured. Experimental researches on the separation of zinc ion from aqueous solutions were performed in the liquid membrane permeator with 30 vol % D2EHPA solution in kerosine as liquid membrane. As results, the liquid membrane permeator separates zinc ion from aqueous solutions continuously and effectively in the wide range of operating conditions. A simple mass transfer rate model using equilibrium constant of the extraction reaction for the system used were proposed, and the model was compared with experimental results of separation of zinc ion in the permeator. And the effects of operating factors, such as space time, pH of extraction solution, extraction temperature, on the separation rate of zinc ion in the permeator were experimentally examined.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.149-159
• /
• 1994

The kinetics and equilibrium of metal extraction by benzamidoxime and phenylacetamidoxime-chloroform were investigated to apply amidoxime to metal extraction as chelating agent. The overall extraction constant extraction mechanism and selective extraction of copper were examined from the relation among extraction ratio, hydrogen ion concentration and extractant concentration. The experimental rate equation of copper extraction coincided with the theoretical rate equation and was expressed as $R_o=k{\overline{C}}_{HRo}(C_{Mo}/C_{Ho})^{1/2}$. The chemical species extracted was found to the type of ${\overline{CuR_2}}$.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2013

Subcritical water which acts as organic solvent with increasing temperature and pressure because dielectric constant and viscosity decrease can be used to remediate PAHs-contaminated soil. Factors influencing on extraction were studied with varying the water temperature $200{\sim}275^{\circ}C$, extraction time 0~90 min, flow rate 10~100 mL/min and pressure 3.9~10MPa. 300 g of soil sample which was contaminated with PAHs(naphthalene, phenanthrene, fluoranthene and pyrene; 423, 420, 539 and 428 mg/kg of initial concentration) was packed into the cell and placed to reactor and then the subcritical water was pumped through the cell for PAHs extraction. Naphthalene was removed almost 100% at relatively low temperature ($200^{\circ}C$). The removal rate of phenanthrene, fluoranthene, and pyrene increased by 8, 26, and 23% when the temperature increased from 200 to $275^{\circ}C$; and it was gradually increased as extraction time increased from 0 to 90 min. Decreasing removal rate when water flow rate increased from 10 to 30 mL/min, but there was no significant change after 30 mL/min. This is supposed due to channeling phenomenon. The pressure was not an effective factor for extraction of PAHs in this study. Based on the results, the importance of effective factor was in following sequence: temperature >> time > flow rate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.131-137
• /
• 1998

A composite copper coated powder was generated by pressure hydrogen stripping copper from Kelex 100 solvent extractant in the presence of silica powder. Within the limitation of solvent extraction under constant conditions, both loading level and stripping rate were reproducible. The stripping copper kinetics are reduced from a divalent state to a metallic state and then deposited on the surface of the silica powder. Copper nucleates heterogeneously on the seed particles. They are giving an agglomerated and non - uniform powder.

• The Korean Journal of Food And Nutrition
• /
• v.4 no.2
• /
• pp.141-148
• /
• 1991

In order to Investigate the extraction mechanism of barley tea in cylindrical packed column, pilot plant scale packed column was designed and constructed. And extraction conditions for steady flow in the packed column were searched. The main results of this study are as follows ; 1. Circulation of the stock barley tea before the extraction running was indispensable In consideration of inequality, gas, particles existed in packed bed. Solid-liquid equilibrium was initially maintained after the circulation. 2. Flow direction of solvent must be up-flow for maintaining the constant bed height and flow rate during the extraction. Paessure drop in pucked bed was similar to decrease ratio of extract concentration. 3. The porosity of packed bed was in the range of 0.24∼0.36 according to the particle sloe. And it was decreased as the particle size became smaller.

• Journal of the Korean Institute of Gas
• /
• v.3 no.1
• /
• pp.33-40
• /
• 1999

The extraction characteristics of lipids from powdered sea mustard have been investigated by the use of supercritical carbon dioxide($SC-CO_2$) and cosolvents. The extraction rate was increased as the particle size of the sea mustard is smaller, the pressure is higher, the temperature is lower, and the quantities of the fluid is more. However, the extraction yield of lipids from sea mustard was almost constant at a given condition. The optimum extraction condition was determined with the extraction yield of $1.45wt\%$ at 300um of particle size, 313K of $SC-CO_2$ temperature, 13.8MPa of pressure, and 30L/min of flow rate. Ethanol was the most efficient cosolvent among ethanol, methanol, and hexane. The extraction yield was increased at about 2.21times by the addition of ethanol as a cosolvent to $SC-CO_2$. As the residence time and the average concentration of lipids were decreased, the mass transfer parameter($k_fa$) was increased. But the opposite result was obtained when the ethanol was used as cosolvent.

• Advances in materials Research
• /
• v.9 no.2
• /
• pp.109-114
• /
• 2020

The purpose of this study was to observe the trend of compounds release from acrylic resin oral prosthesis when used for drug delivery as well as a restoration. In this study, 10 specimens of heat-cured polymethylmethacrylate material were prepared and loaded with methylene blue biological stain. The specimens were then submerged in vials with 5 ml distilled water for 24 hours. The extraction procedure continued for 4 days, each day the specimens were immersed in another 5 ml distilled water vial. All extracted solutions were analyzed by visible light spectroscopy for absorbance comparison. The statistical results showed that the absorbance values were significantly different in the first day of extraction than the following days. However, there was no statistical difference among the 2^nd, 3^rd and 4^th days of extraction. Biological stain loading to acrylic resin at the mixing stage, and then after extraction in distilled water, showed a burst release during the first day followed by a constant release during the following few days.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1337-1339
• /
• 2001

We have investigated the relation between the molecular weight distribution (MWD) of diffusible species and the recovery rate of hydrophobicity of room-temperature vulcanizing (RTV) silicone rubber (SIR) using solvent extraction at various temperatures. It was observed that the extract had a MWD ranging from a few hundreds g/mol to hundreds of thousands g/mol. By measuring the migration of siloxane to the extracted SIR surface through a thin carbon coating, the aspect of migration of diffusible species was observed as a real time plot, and the time constant of the migration was also calculated. According to the time dependence of IR-absorbance, the time constant was increased with the increase of MW of the extracts.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.672-682
• /
• 1993

2, 4-Heptadione(abbreviated to 24HTD) was synthesized from methylpropyl ketone and ethyl acetate with sodium amide, and the equilibrium and the kinetic characteristics of copper extraction by 24HTD-chloroform were investigated. Equilibrium constants such as the dissociation constant and the distribution coefficient of 24HTD and the stability constant of the 24HTD-Cu chelate were evaluated from the spectrophotometry, and the overall equilibrium constant of the extraction was also determined. The extracted species of the 24HTD-Cu chelate was found to be $CuR_2$ and the initial rate of the extraction of coupper by 24HTD in chloroform was expressed by $R_0=k[\bar{HR}]([Cu^{2+}]/[H^+])^{0.5}$.