• 대한구순구개열학회지
• /
• 제16권1호
• /
• pp.25-35
• /
• 2013

We report the treatment of an adult Class II malocclusion with severe crowding and a hopeless lower second molar. According to the treatment plan, 4 premolars and 4 third molars were to be extracted for 2-jaw surgery. To replace the hopeless lower second molar, one upper third molar was successfully autotransplanted during the pre-surgical orthodontic treatment. Multiple teeth are frequently extracted for treatment purposes in adult surgical cases. Under precise diagnosis, the reuse of extracted teeth to replace missing teeth can be a successful alternative even in adult surgical patients.

• Journal of Periodontal and Implant Science
• /
• 제35권2호
• /
• pp.311-319
• /
• 2005

In order to examine the effects of advanced periodontitis on the dental pulps, 38 extracted human teeth were examined histologically. The 38 teeth had a positive or negative state in the electric pulp test(EPT). In addition, almost of the 38 teeth had a deep pocket and severe mobility, and floating state. A medical and dental history was elicited. The extracted teeth fixed in 10% neutral formalin solution. The general tissue processing method was followed. The tissue block including the teeth was prepared for optical microscopy using hematoxillin-eosin staining. Among the 38 periodontally involved teeth, the dental pulps were respectively intact in 12(31%), and a pulp stone(or linear calcifications) was found in 18 teeeth(47%). In addition, 17 teeth(44%) had pulps exhibiting inflammatory reactions with varying intensities, such as hyperemia, pulp abscess, pulp necrosis. Among the 38 periodontally involved teeth, 37 teeth tested a positive to the EPT, and 7 teeth tested negative. The EPT positive 37 teeth had various histological features such as 7 normal pulp(18%), 17 pulp stone(44%), 1 hyperemia (2%), 9 pulpitis(23%), 5 root resorption(13%), 3 pulp abscess(7%), and 3 pulp necrosis(7%), In conclusion, it is suggested that in the EPT positive teeth, advanced periodontally involved teeth can cause inflammation of the dental pulp.

• 대한치과의사협회지
• /
• 제12권9호
• /
• pp.707-712
• /
• 1974

The 800 extracted permanent teeth of first and second premolar were observed and obtained the following results: Those teeth were extracted from the population of dentistless rural area. The cause of extraction of those teeth was only the dental caries. It was performed by the free dental service team from 1966 to 1973. The findings were as follows: 1. The most incidence of caries occurrence was on the distal surface and the least was mesial side occlusal surface. 2. The average rate of decayed surface was higher in the second premolar group than the first permolar. 3. The average rate of decayed surface was higher in the teeth of mandible than maxilla. 4. The average rate of decayed surface was higher in female than male. 5. The average rate of decayed surface per tooth was 3.05±1.83.

• 대한치과의사협회지
• /
• 제12권3호
• /
• pp.177-182
• /
• 1974

The 800 extracted permanent teeth of first and second molar were observed and obtained the following results; Those teeth were extracted from the population of dentistless rural area. The cause of extraction of those teeth was only the dental caries. It was performed by the free dental service team from 1966 to 1972. The findings were as follows: 1. The most incidence of caries occurrence was on the occlusal surface and the least was lingual surface. 2. The distal surface caries rate was higher than the other surface except occlusals. 3. The average rate of decayed surface was higher in the second molar group than the first molar. 4. The average rate of dacayed surface was higher in the teeth of mandible than maxilla. 5. The average rate of decayed surface was higher in female than male. 6. The average rate decayed surface per tooth was 2.54±1.98.

• International Journal of Oral Biology
• /
• 제40권3호
• /
• pp.147-150
• /
• 2015

The purpose of this study was to evaluate the effect of single antiplatelet treatment on delayed bleeding, in patients undergoing dental extraction. A total of 154 teeth were extracted in 94 patients with ongoing antiplatelet treatment, who were taking single antiplatelet of either aspirin or clopidogrel. All patients underwent simple dental extraction; local hemostasis was performed with gauze-biting, suturing, and/or application of a local hemostatic agent. Delayed bleeding was recorded in 5 teeth out of a total of 154 teeth after extraction, the incidence of postoperative delayed bleeding being 3.2%. The bleeding was controlled by the patients themselves, through application of pressure with additional gauze-biting. No one visited the doctor or emergency room for hemostasis. These results confirmed that patients taking single antiplatelet drugs may have teeth extracted safely without interruption of the antiplatelet treatment.

• 대한치과의사협회지
• /
• 제58권7호
• /
• pp.398-403
• /
• 2020

Odontogenic anomalies can occur as a result of conjoining defects. These include fusion, gemination and concrescence. The presence of fused teeth can lead to various clinical problems, including the aplasia of permanent successor, the supernumerary teeth and delayed eruption of permanent teeth. In general, the supernumerary teeth associated with fusion is mainly found in the maxillary anterior region. This report describes rare cases of supernumerary tooth associated with fused teeth of mandibular primary lateral incisor and canine. In the first case, fused teeth was extracted. The supernumerary teeth was erupted at canine space. The second case is still being observed. Extraction of fused teeth and observation of supernumerary teeth is planned.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.769-781
• /
• 1997

The tristimulus values of 180 extracted maxillary and mandibular anterior teeth were measured by colorimeter. And it were colnverted to Munsell color order system(Hue, Value, Chroma) and CIE $L^*a^*b^*$ color coordinates. The commonly used Vita, and Bioform shade guides, 2 composite resin shade guides(Prisma APH and Z-100), and a glass-ionomer shade guide(Fuji II) were compared with these teeth. At the middle facial surface, color distributions of teeth were Hue(0.56YR to 9.77Y), Value(2.46 to 7.9), and Chroma(0.14 to 2.02). And the aberaged values and standard deviations for $L^*a^*b^*$ were $63.18{\pm}10.44$, $1.11{\pm}1.66$, and $5.79{\pm}2.36$. The shade guide did not match well with the color space of the human teeth. Especially, the lacks of the Yellow-red Hues and higher values were prominent. Compare with other measurements, the Hues of the teeth measured in this study were broadly distributed(most of ranges in Y and YR were included), while the Value and chroma were shown to the lower.

• 대한소아치과학회지
• /
• 제10권1호
• /
• pp.77-83
• /
• 1983

The purpose of this study was to observe the microleakage of a pit and fissure sealant at the tooth-restoration interface. One hundred and sixty-seven extracted permanent and deciduous teeth were used and some simple mechanical pretreatment were done before etching. The degree of microleakage was assessed by $Ca^{45}$ after 24 hours, and 2 months. The results were as follows: 1. Among total 167 teeth, 53 teeth (32%) were demonstrated the microleakage. 2. After 2 months the leakage was increased from 22 percent to 35 percent in permanent teeth, and from 32 percent to 43 percent in primary teeth. 3. The group treated by fluoride paste was demonstrated the largest leakage, 50 percent in primary teeth and 33 percent in permanent teeth. There are more leakage in primary teeth (38%) than permanent teeth (28%).

• 대한치과교정학회지
• /
• 제45권5호
• /
• pp.217-225
• /
• 2015

Objective: Three-dimensional (3D) printing is a recent technological development that may play a significant role in orthodontic diagnosis and treatment. It can be used to fabricate skull models or study models, as well as to make replica teeth in autotransplantation or tooth impaction cases. The aim of this study was to evaluate the accuracy of fabrication of replica teeth made by two types of 3D printing technologies. Methods: Fifty extracted molar teeth were selected as samples. They were scanned to generate high-resolution 3D surface model stereolithography files. These files were converted into physical models using two types of 3D printing technologies: Fused deposition modeling (FDM) and PolyJet technology. All replica teeth were scanned and 3D images generated. Computer software compared the replica teeth to the original teeth with linear measurements, volumetric measurements, and mean deviation measurements with best-fit alignment. Paired t-tests were used to statistically analyze the measurements. Results: Most measurements of teeth formed using FDM tended to be slightly smaller, while those of the PolyJet replicas tended to be slightly larger, than those of the extracted teeth. Mean deviation measurements with best-fit alignment of FDM and PolyJet group were 0.047 mm and 0.038 mm, respectively. Although there were statistically significant differences, they were regarded as clinically insignificant. Conclusions: This study confirms that FDM and PolyJet technologies are accurate enough to be usable in orthodontic diagnosis and treatment.

• 대한소아치과학회지
• /
• 제49권3호
• /
• pp.348-356
• /
• 2022

과잉치는 치판의 과도한 성장과 분화에 의해서 발생된다. 이로 인해 이소맹출, 맹출지연, 인접치의 치근 흡수, 그리고 치간이개 등의 문제가 발생할 수 있다. 영유아기에서의 과잉치는 드물며 국내에서는 거의 보고되지 않았다. 이 증례에서는 3개의 매복된 과잉치가 있는 생후 2일된 신생아에 대해 보고하고 있으며, 환자는 21개월간 추적 관찰되었다. 유치열기에 맹출된 하나의 과잉치는 14개월이 되었을 때 중등도 진정 하에 발치되었다. 발치된 과잉치에 대해 micro-computed tomography (CT) 분석을 진행하여 치근단 부위의 미세한 형태 이상을 확인하였다. 과잉치 발치 후 치간이개는 감소하였고 구강위생도 개선되었다. 조기 진단 및 치료를 통해 과잉치로 인한 합병증을 예방할 수 있다.