• 한국항공운항학회지
• /
• 제27권4호
• /
• pp.9-20
• /
• 2019

A military aircraft generally includes external stores such as fuel tanks or external arming, depending on the purpose of the operation. When a store is dropped from a military aircraft at high subsonic, transonic, or supersonic speeds, the aerodynamic forces and moments acting on the store can be sufficient to send the store back into contact with the aircraft. This can cause damage to the aircraft and endanger the life of the crew. In this study, time accurate computational fluid dynamics (CFD) with dynamic moving grid (moving and deformable mesh, MDM) technique has been used to accurately calculate store trajectories. For the verification of the present numerical approach, a wind tunnel test model for the wing-pylon-finned store configuration has been considered and analyzed. The comparison results for the ejected store trajectories between the present numerical analysis and the wind tunnel test data at the Mach number of 0.95 and 1.2 are presented. It is also importantly shown that the numerical parameter of MDM technique gives significant effect for the calculated store trajectory in the low-supersonic flow such as Mach 1.2.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.1983-1989
• /
• 2012

본 연구에서는 외부 장착물이 존재하는 항공기의 안정성 검증을 위해 진동 및 구조해석을 수행하였다. 외부 장착물이 존재하는 경우, 외부 장착물 자체의 정확성 및 안정성을 위한 요구조건이 주어지며, 이와 동시에 외부 장착물이 항공기에 장착되도록 개조된 항공기 구조물의 안정성 문제가 중요하다. 따라서 본 연구에서는 정적 상태에서의 고유주파수 계산을 통한 공진 여부를 조사하고 발사기를 장착하기 위해 개조된 구조물에 작용하는 진동하중을 구하였다. 또한 로컬 모델링 방법을 이용하여 추가 장착 구조물의 구조적 안정성을 검토하였으며 지상 및 비행시험을 통하여 이를 검증하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권4호
• /
• pp.345-350
• /
• 2010

The repetitive vibrating action of an aerodynamic load causes an external fuel tank's horizontal fin to experience a shorter life cycle than its originally predicted one. Store separation analysis is needed to redesign the fin of an external fuel tank. In this research, free-drop tests were conducted using 15% scaled models in a subsonic wind tunnel in order to analyze the store separation characteristics of an external fuel tank. The store separation trajectory based on grid tests was also obtained to verify the results of the free-drop tests. The results acquired from the free-drop tests correlated well with the grid tests in regards to the trajectories and behavior of the stores separated from the aircraft. This agreement was especially noted in the early stages of the store separation.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.80-85
• /
• 2008

The prediction of the separation trajectories of external stores released from a military aircraft is an important task in the aircraft design area having the objective to define the operational and release envelopes. This paper presents the results obtained for store separation by employing commercial softwares, FLUENT and CFD-FASTRAN. FLUENT treats the rigid body motion by employing a remeshing scheme. CFD-FASTRAN uses Chimera(overset) grid and interpolations. It was found that, for the prediction of the trajectories and behavior of the stores separated from the wing, both codes show the good agreement with the experimental results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.157-161
• /
• 2007

The prediction of the safe separation of the external stores carried on military aircraft is an important task in the aerodynamic design area having the objective to define the operational, release envelopes. The major concern of this study is only safe jettison problem with ejections. This work consists of concept and some results for external store configurations. A Computational Fluid Dynamics technique is applied to calculate the aerodynamic forces. The FLUENT with an implicit Euler solver is used for the present simulations. The computational results are validated against the experimental data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.42-47
• /
• 2014

In this paper, fatigue life analysis of each structure was performed through theoretical analysis method at design stage in order to verify the success or failure of the store's acoustic noise durability according to the Method 515.5 standard of MIL-STD-810F. In addition, experimental analysis was carried out through the ground and flight test by manufacturing the measuring store, and verification of the sound durability was completed through the flight test after manufacture of the actual store. Furthermore, the commercial FEM code through the PSD calculation method applying measured SPL enables verify the durability of new store components development for the future.

• 복식문화연구
• /
• 제23권3호
• /
• pp.400-411
• /
• 2015

Successful use of displays in stores arouses consumers' curiosity, and induces them to purchase a product after a visit. Facade is a word meaning an external front wall of a building, and is usually the first point of visual contact for the consumers. The present study is an empirical investigation of external appearance of a clothing store, with a $2{\times}2{\times}2$ factorial design of facade, show window, and wall surface material designed for the purpose of the study. Dependent variables were store image variables and attitude toward store. A total of 320 questionnaires from male and female consumers were used for the analysis. Facade type and material had significant main and interaction effects, while show window type had no meaningful effects overall. A facade of irregular design prompted significantly higher levels of perceived 'elegance', 'uniqueness', and 'attractiveness' of the store. Material itself did not have significant influence but did have significant interaction effect with facade design. The interaction effect was found in store attitude as well. In order to create a positive store attitude, a concrete material facade should have an irregular design. Companies owning fashion brands should carefully select facade type and wall surface material in the visual merchandising strategies of a store.

• 한국군사과학기술학회지
• /
• 제26권1호
• /
• pp.83-90
• /
• 2023

The external store fitted to the aircraft may affect the flight characteristics and flight safety of the aircraft, which requires the analyses and testing on it. The purpose of this study is to identify and analyze types of failures that can affect the flight safety of aircraft due to the installation of external stores, and to check the flight safety of aircraft through dropping tests of the external stores. After identifying the types of failures that could affect the flight safety of the aircraft, the criticality was calculated to analyze the effect on the flight safety of the aircraft. Four types of failures were selected: unintentional dropping, failure of dropping, unintentional main wing deployment, and release of tail wing restraint of the external store, which are considered to affect the flight safety of the aircraft due to the operation of the external store. As a result of the aircraft's flight safety analysis on the failure types, the criticality requirements were met. Based on this, after obtaining the airworthiness certification, the drop test was successfully performed to confirm the flight safety of the aircraft by mounting an external store on the aircraft. However, in addition to the four hazards carried out in this study, the real external stores of the military aircraft may have various factors affecting the flight safety of the aircraft, so further research will be needed.

• 한국식생활문화학회지
• /
• 제21권2호
• /
• pp.131-141
• /
• 2006

The purpose of this research is to develop the management strategy for a take-out specialty sore on the basis of SWOT analysis which requires analysis of internal and external environmental informations. The survey was performed in order to gather the internal and external customer informations for a take-out specialty store. The questionnaires developed were distributed to customers (N=188) and employees (N=23) at 5 take-out specialty store branches from April 25, 2002 to April 29, 2002. The statistical data analysis was completed by SPSS WIN 10.0 for descriptive analysis, factor nalaysis, and Pearson's correlation. IPA(Importance-Performance Analysis) was applied in order to identify the critical management issues which would be explained with the organization's weakness or strength. SWOT analysis was performed through identifying the organizational strength and weakness as internal environment factors and external environmental opportunity and threat as uncontrollable external factors.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.73-80
• /
• 2007

Modern aircraft are required to carry various external stores mounted at different locations on the wing. Sometimes the attachment of stores to an aircraft wing leads to flutter speed reduction, which is a very severe aeroelastic problem. In order to suppress structural vibration and expand the flutter boundary of the aircraft with stores, it is necessary to investigate the main problems and characteristics of them. In addition, active vibration control may be required because passive vibration isolators show limited capabilities for the various wing/store configuration. In this paper, therefore, the flutter stability to the various wing/store configurations was investigated and active vibration control of wing/store model was performed using a piezoelectric actuator.