• 한국컴퓨터그래픽스학회논문지
• /
• 제23권3호
• /
• pp.105-113
• /
• 2017

본 논문에서는 물리 기반 가상 환경에서 참조 동작을 추적하는 캐릭터 동작을 생성할 때 캐릭터 동작에 대한 최적화와 함께 참조 동작에 대한 타임 워핑(time warping)을 동시에 수행할 수 있는 새로운 온라인 궤적 최적화(trajectory optimization) 기법을 제안한다. 일반적으로 참조 동작에 대한 샘플링 시간이 균일한 간격으로 고정되어 있는 기존의 물리 기반 캐릭터 애니메이션 기법과는 달리, 본 논문에서 제안하는 방법은 캐릭터 동작의 물리적 변화와 함께 샘플링 시간의 변화를 동시에 최적화 시킴으로써 외력에 대해 더욱 효과적으로 대응할 수 있는 참조 동작에 대한 최적의 타임 워핑을 찾아낸다. 이를 위해, 전신 캐릭터(full-body character)의 동역학과 함께 참조 동작에 대한 샘플링 시간의 변화를 함께 고려한 최적 제어 문제(optimal control problem)를 정형화하고 이 문제를 실행 시간에 시간 축을 따라 이동하는 고정된 크기의 시간 윈도우에 대해 반복적으로 풂으로써 캐릭터 동작과 샘플링 시간에 대한 최적 제어 정책(optimal control policy)을 생성하는 모델예측제어(model predictive control) 프레임워크를 제안한다. 실험을 통해, 제안된 프레임워크가 하나의 참조 동작만으로 외력에 대해 강인하게 반응하는 동작을 생성하고, 배경 음악에 따라 리드미컬한 동작을 생성하는데 효과적임을 보여준다.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4698-4707
• /
• 2022

As part of the ICRP Task Group 103 project, we developed ten thyroid models for the pediatric mesh-type reference computational phantoms (MRCPs). The thyroid is not only a radiosensitive target organ needed for effective dose calculation but an important source region particularly for radioactive iodines. The thyroid models for the pediatric MRCPs were constructed by converting those of the pediatric voxel-type reference computational phantoms (VRCPs) in ICRP Publication 143 to a high-quality mesh format, faithfully maintaining their original topology. At the same time, we improved several anatomical parameters of the thyroid models for the pediatric MRCPs, including the mass, overlying tissue thickness, location, and isthmus dimensions. Absorbed doses to the thyroid for the pediatric MRCPs for photon external exposures were calculated and compared with those of the pediatric VRCPs, finding that the differences between the MRCPs and VRCPs were not significant except for very low energies (<0.03 MeV). Specific absorbed fractions (target ⟵ thyroid) for photon internal exposures were also compared, where significant differences were frequently observed especially for the target organs/tissues close to the thyroid (e.g., a factor of ~1.2-~327 for the thymus as a target) due mainly to anatomical improvement of the MRCP thyroid models.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.313-316
• /
• 2008

Although the positioning accuracy of the Global Positioning System (GPS) has been studied extensively and used widely, it is still limited due to errors from sources such as the ionospheric effect, orbital uncertainty, antenna phase center variation, signal multipath and tropospheric influence. This investigation addresses the tropospheric effect on GPS height determination. Data obtained from GPS receivers and co-located surface meteorological instruments in 2003 are adopted in this study. The Ministry of the Interior (MOl), Taiwan, established these GPS receivers as continuous operating reference stations. Two different approaches, parameter estimation and external correction, are utilized to correct the zenith tropospheric delay (ZTD) by applying the surface meteorological measurements (SMM) data. Yet, incorrect pressure measurement leads to very poor accuracy. The GPS height can be affected by a few meters, and the root-mean-square (rms) of the daily solution ranges from a few millimeters to centimeters, no matter what the approach adopted. The effect is least obvious when using SMM data for the parameter estimation approach, but the constant corrections of the GPS height occur more often at higher altitudes. As for the external correction approach, the Saastamoinen model with SMM data makes the repeatability of the GPS height maintained at few centimeters, while the rms of the daily solution displays an improvement of about 2-3 mm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.131-136
• /
• 1997

This paper represent the variable structure adaptive mode control technique which is new approach to implement the robust control of industrial robot manipulator with external disturbances and parameter uncertainties. Sliding mode control is a well-known technique for robust control of uncertain nonlinear systems. The robustness of sliding model controllers can be shown in contiuous time, but digital implementation may not preserve robustness properties because the sampling process limits the existence of a true sliding mode. the sampling process often forces the trajectory to oscillate in the neighborhood of the sliding surface. Adaptive control technique is particularly well-suited to robot manipulators where dynamic model is highly complex and may contain unknown parameters. Adaptive control algorithm is designed by using the principle of the model reference adaptive control method based upon the hyperstability theory. The proposed control scheme has a simple sturcture is computationally fast and does not require knowledge of the complex dynamic model or the parameter values of the manipulator or the payload. Simulation results show that the proposed method not only improves the performance of the system but also reduces the chattering problem of sliding mode control, Consequently, it is expected that the new adaptive sliding mode control algorithm will be suited for various practical applications of industrial robot control system.

• 한국항공운항학회지
• /
• 제23권3호
• /
• pp.8-17
• /
• 2015

In this research, low fidelity air/heat load analysis was conducted for the intake of high speed vehicle. For air/heat load calculations, aerodynamic properties at the surface and the boundary layer edge were estimated using Taylor-Maccoll equation for conical flow, shockwave relation and Prandtl-Meyer expansion equation for internal and external flow. Couette flow assumption and Reynolds analogy were used in order to calculate convective heat transfer coefficient. In order to calculate skin friction coefficient for heat transfer coefficient analysis, Van Driest method II and Reference Enthalpy method were considered. An axis symmetric SCRAMJET model was selected as a reference configuration for verifying the proper implementation of the present method. Comparison of the results using the present method and Computational Fluid Dynamic analysis showed that the present method is valuable for efficiently providing pressure and heat loads for air-intake structure design of the high speed air vehicle.

• 정보처리학회논문지A
• /
• 제10A권2호
• /
• pp.111-122
• /
• 2003

군사용 워게임 시뮬레이션 모델들의 상호연동을 위해서는 국제표준연동(HLA : High Level Architecture)구조를 반드시 갖추어야하며 타 모델과 연동시 발생되는 시스템 오버헤드를 줄이기 위해서는 병렬 시뮬레이션 엔진 도입이 효과적이다. 그러나 기존 군사용 워게임 시뮬레이션 모델엔진의 이벤트 처리는 순차적 이벤트-드리븐 방식으로 처리하고 있다. 이는 병렬로 처리 시 글로벌 자료영역에 대한 동시참조등의 문제점들이 발생하기 때문이다. 아울러 기존 시뮬레이션 플랫폼으로 다중 CPU 시스템을 사용하여도 여러 개의 CPU를 다 활용하지 못하는 결과를 초래하고 있다. 따라서 이 논문에서는 군사용 워 게임 모델의 시스템 처리능력 향상과 글로벌 자료 영역에 대한 동시참조, 대외적인 시뮬레이션 시간처리, 장애 회복(Crash Recovery)시 병행 처리된 이벤트들의 순서를 보장 할 수 있는 객체모델에 기반한 병렬 시뮬레이션 엔진으로의 전환을 제안한다 이 전환된 병렬 시뮬레이션 엔진은 다중 CPU 시스템(SMP)상에서도 병렬 실행이 가능하도록 설계하고 구현하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.148-153
• /
• 1999

In this paper, it is proposed the adaptive-sliding mode control technique which is new approach to implement the robust control of industrial robot manipulator with external disturbances and parameter uncertainties. Over the past decade, the design of advanced control systems for industrial robotic manipulators has been a very active area of research and two major design categories have emerged. Sliding mode control is a well-known technique for robust control of uncertain nonlinear systems. The robustness of sliding model controllers can be shown in continuous time, but digital implementation may not preserve robustness properties because the sampling process limits the existence of a true sliding mode. Adaptive control algorithm is designed by using the principle of the model reference adaptive control method based upon the hyperstability theory. The proposed control scheme has a simple structure is computationally fast and does not require knowledge of the complex dynamic model or the parameter values of the manipulator or the payload. Simulation results how that the proposed method not only improves the performance of the system but also reduces the chattering problem of sliding mode control. Consequently, it is expected that the new adaptive sliding mode control algorithm will be suited for various practical applications of industrial robot control system.

• International journal of advanced smart convergence
• /
• 제11권2호
• /
• pp.171-184
• /
• 2022

The purpose of this paper is output oriented, in order to maximize the output level of sustainable development efficiency of foreign trade in western China with limited input. This paper adopts the relevant input-output indicators of sustainable foreign trade development of 11 provinces and cities in western China from 2016 to 2020, and uses DEA model to measure their technical efficiency, pure technical efficiency and scale efficiency. Malmquist index was used to calculate the total factor productivity change index of each province in western China from 2016 to 2020. We found that, on the whole, the average values of technical efficiency, pure technical efficiency and scale efficiency of provinces and cities in western China from 2016 to 2020 are greater than 0.8, indicating that the western region has high technical efficiency, relatively high management and institutional level and high existing scale level. Scale efficiency is lower than pure technical efficiency on the whole, indicating that the current sustainable development efficiency of foreign trade in western China is mainly limited by its scale level. The technological progress index is higher than the technological efficiency change index, indicating that the total factor productivity of the sustainable development of foreign trade in western China is mainly driven by technological progress and more influenced by external factors. We think the conclusion of this study can provide important reference information for the sustainable development of foreign trade of provinces and cities in western China.

• 자원환경지질
• /
• 제45권4호
• /
• pp.377-384
• /
• 2012

다목적위성인 아리랑 2호 (KOMPSAT-II)에 장착된 위성의 자세제어를 위한 삼축자력계(Triaxial Magnetometer, TAM)에서 측정된 지구자기장의 삼성분 자료로부터 지구 외핵에서부터 오는 주지구자기장 (main geomagnetic field)의 모델을 계산하였다. 일반적으로 지자기 표준모델이라고도 일컫는 IGRF(International Geomagnetic Reference Model)과의 비교를 통해 제작된 모델과의 상관성을 연구하였다. 선행연구에서는 KOMPSAT-I의 3일 자료만을 통해 제작한 것과 달리 2007년 11월과 12월 자료를 항공우주연구원의 협조를 받아 모델에 활용하였다. 선행 연구에서는 구면조화 함수의 차수가 5까지의 유사성을 보인 반면 이번에 얻은 모델은 차수 8-9까지 유사성을 보이며 그 이후 차수 13까지 계산에서는 국제표준모델과 많은 차이를 나타내었다. KOMPSAT-II 자료를 통한 지구자기장 모델을 제작하는 데 있어서 적절한 자료선별과정과 이와 관련된 극지방자료의 포함여부와 외부자기장성분의 적절한 제거 및 위성에 탑재한 측정자력계의 정확도가 국제지자기표준모델과의 유사성 여부에 중요한 요소로 작용하였다. 수년간의 자료입수가 가능할 경우 지구자기장의 영년변화연구에도 지상의 지자기관측소자료와 함께 KOMPSAT-II 자료의 활용이 기대된다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2521-2529
• /
• 2018

This paper deals with a sampled-data tracking control problem for the Takagi-Sugeno fuzzy system with external disturbances. We derive a stability condition guaranteeing both asymptotic stability and H-infinity tracking performance by employing a newly proposed time-dependent line-integral fuzzy Lyapunov-Krasovskii functional. A new integral inequality is also introduced, by which the proposed stability condition is formulated in terms of linear matrix inequalities. Finally, the effectiveness of the proposed method is demonstrated through a simulation example.