• 제목/요약/키워드: external organic carbon

검색결과 62건 처리시간 0.03초

음식폐기물 응축수를 보조탄소원으로 이용하는 막 결합 생물 응조에서의 질소, 인 제거와 막 오염 특성 (Characteristics of Nutrient Removal and Membrane Fouling in a Membrane Bioreactor using Food Waste as an Additional Carbon Source)

  • 안용태;윤종호;채소룡;신항식
    • 대한환경공학회지
    • /
    • 제27권5호
    • /
    • pp.519-524
    • /
    • 2005
  • 국내 하수의 낮은 C/N비를 나타내는 특성으로 인하여 질소와 인의 효과적인 제거를 위해서는 추가적인 보조 탄소원의 주입이 필요한 실정이다. 여러 가지 적용 가능한 외부 탄소원 중, 음식폐기물은 다량의 유기물을 함유하고 있어 다양한 전처리를 통하여 하 폐수 고도처리 공정의 외부탄소원으로 이용가치가 높다고 할 수 있다. 본 연구에서는 음식폐기물 고속발효건조 과정에서 발생하는 음식폐기물 응축수를 A/O 공정으로 구성된 막 결합 생물반응조의 외부탄소원으로 적용 가능성에 대해 평가하고 다양한 운전 조건에서의 질소 인 성분의 제거 효율을 살펴보았으며, 막 오염에 영향을 미칠 수 있는 다양한 인자들에 대한 평가를 실시하였다. 실험 결과 무산소 조건에서 0.19 g $NO_3-N/g$ VSS/day의 탈질율을 얻을 수 있었으며 연속운전에서는 음식폐기물 응축수 주입을 통하여 총질소와 인 성분의 제거율을 각각 최대 64%, 41% 향상 시킬 수 있었다. 또한 유입수 유량의 0.5% (vol/vol)의 외부탄소원 주입 조건에서도 효과적인 처리효율을 얻을 수 있었으며, 전체 공정의 수리학적 체류시간 8시간 이상, 무산소조와 호기조의 체류시간은 각각 3시간, 5시간에서 최적의 처리효율을 나타내었다. 실제 생환하수 처리 시, 질소와 인의 제거효율은 증진되었으나 막 결합 생물 반응조 내의 전체 입자의 크기 증가 및 미생물 체외고분자 물질 중 단백질 성분의 증가로 인하여 전체 막 저항 값이 증가하는 경향을 보였으며, 유입수의 고형물질의 조절을 통하여 막 오염을 줄일 수 있었다.

연속회분식반응조에서 유기물 부하와 질산염농도에 따른 생물학적 질소 및 인 제거 특성 (Biological Nitrogen and Phosphorus Removal Characteristics on Organic Material and Nitrate Loadings in SBR Process)

  • 김이태;이희자;김광수;배우근
    • 한국물환경학회지
    • /
    • 제20권6호
    • /
    • pp.571-576
    • /
    • 2004
  • Since anaerobic/anoxic/oxic process, which is a typical mainstream biological nitrogen and phosphorus removal process, utilizes influent organic matter as an external carbon source for phosphorus release in anaerobic or anoxic stage, influent COD/T-P ratio gives a strong influence on performance of phosphorus removal process. In this study, a bench scale experiment was carried out for SBR process to investigate nitrogen and phosphorus removal at various influent COD/T-P ratio and nitrate loadings of 23~73 and 1.6~14.3g $NO_3{^-}-N/kg$ MLSS, respectively. The phosphorus release and excess uptake in anoxic condition were very active at influent COD/T-P ratios of 44 and 73. However, its release and uptake was not obviously observed at COD/T-P ratio of 23. Consequently, phosphorus removal efficiency was decreased. In addition, the phosphorus release and uptake rate in anoxic condition increased as the nitrate loading decreased. Specific denitrification rate had significantly high correlation with organic materials and nitrate loadings of the anoxic phase too. The rate of phosphorus release and uptake in the anoxic condition were $0.08{\sim}0.94kg\;S-P/kg\;MLSS{\cdot}d$ and $0.012{\sim}0.1kg\;S-P/kg\;MLSS{\cdot}d$, respectively.

연속회분식 반응기(Sequencing Batch Reactor)를 이용한 분뇨중 유기물과 질소 및 인의 동시제거 (Removal of Simultaneously Biological Organic, Nitrogen, and Phosphorus Removal in Sequencing Batch Reactors using Night-soil)

  • 한기백;박동근
    • 한국환경과학회지
    • /
    • 제6권6호
    • /
    • pp.697-709
    • /
    • 1997
  • Sequencing Batch Reactor(SBR) experiments for organics and nutrients removal have been conducted to find an optimum anaerobic/anoxic/aerobic cycling time and evaluate the applicability of oxidation-reduction potential(ORP) as a process control parameter. In this study, a 61 bench-scale plant was used and fed with night-soil wastewater in K city which contained TCODcr : 10, 680 mg/l, TBm : 6, 893 mg/l, $NH_4^+-N$ : 1, 609 mg/l, $PO_4^{3-}-P$ : 602 mg/l on average. The cycling time In SBRs was adjusted at 12 hours and 24 hours, and then certainly included anaerobic, aerobic and inoxic conditions. Also, for each cycling time, we performed 3 series of experiment simultaneously which was set up 10 days, 20 days and 30 days as SRT From the experimental results, the optimum cycling time for biological nutrient removal with nlght-soil wastewater was respctively 3hrs, 5hrs, 3hrs(anaerobic-aerobic-anoxic), Nitrogen removal efficiency was 77.9%, 77.9%, 81.7% for each SRT, respectively. When external carbon source was fed in the anoxic phase, ORP-bending point indicating nitrate break point appeared clearly and nitrogen removal efficiency increased as 96.5%, 97.1%, 98.9%. Phosphate removal efficiency was 59.8%, 64.571, 68.6% for each SRT. Also, we finded the applicability of ORP as a process control parameter in SBRs.

  • PDF

섬유상 여과필터의 고온 내구성 향상을 위한 테프론 코팅 연구 (Teflon coating of fabric filters for enhancement of high temperature durability)

  • 김은주;박영구
    • 한국응용과학기술학회지
    • /
    • 제28권2호
    • /
    • pp.232-239
    • /
    • 2011
  • Fabric fibrous filter has been used in various industrial applications owing to the low cost and wide generality. However, the basic properties of fabric materials often limit the practical utilization including hot gas cleaning. This study attempts to find new coatings of porous fibrous filter media in order to overcome its insufficient thermal resistance and durability. Teflon was one of the plausible chemicals to supplement the vulnerability against frequent external thermal impacts. A foaming agent composed of Teflon and some organic additives was tentatively coated on the glass fiber mat. The present test Teflon foam coated filter was fount to be useful for hot gas cleaning, up to $250^{\circ}C$-$300^{\circ}C$. Close examination using XPS(X-ray Photoelectron Spectroscopy) and Contact angle proved the binding interactions between carbon and fluorine, which implies coating stability. The PTFE/Glass foam coated filter consisted of more than 95% (C-F)n bond, and showed super-hydrophobic with good-oleophobic characteristics. The contact angle of liquid droplets on the filter surface enabled to find the filter wet-ability against liquid water or oil.

1차 하수슬러지의 유기산발효에 미치는 HRT의 영향 (The effect of HRT variation on acidogenic fermentation with municipal primary sludge)

  • 김형석;송영채;성낙창
    • 유기물자원화
    • /
    • 제10권3호
    • /
    • pp.68-73
    • /
    • 2002
  • 하수슬러지의 발생량 감소와 BNR공정의 외부탄소원 개발에 대한 해결방안으로 1차슬러지의 산발효가 연구되었다. 기존 혐기성 소화조를 활용한다는 측면에서 반응조의 형상, 온도, pH와 같은 환경인자는 변화시키지 않았고, HRT변화에 따른 가수분해율, 산생성율 및 환경인자의 특성변화를 검토하였다. 평균 가수분해율은 HRT가 3일과 1.5일 일때, 각각 0.0309., $0.0204mgSCOD_{prod.}/mgICOD_{inf.}$였다. 평균 산생성율은 HRT 3일에서 0.0068mg HAc/mg $TCOD_{inf.}$, 0.0652mgHAc/mg $VSS_{destroyed}$였다. HRT 1.5일에서 평균 산생성율은 0.0060mg HAc/mg $TCOD_{inf.}$, 0.0346mgHAc/mg $VSS_{destroyed}$였다. 실험기간 동안 알칼리도와 pH는 인위적인 조절없이 적정하게 유지되었다.

  • PDF

Effect of C/N ratio on polyhydroxyalkanoates (PHA) accumulation by Cupriavidus necator and its implication on the use of rice straw hydrolysates

  • Ahn, Junmo;Jho, Eun Hea;Nam, Kyoungphile
    • Environmental Engineering Research
    • /
    • 제20권3호
    • /
    • pp.246-253
    • /
    • 2015
  • The effects of carbon-to-nitrogen (C/N) ratio in simulated rice straw hydrolysates using glucose and ammonium chloride on polyhydroxyalkanoates (PHA) accumulation by Cupriavidus necator was investigated. In general, PHA accumulation rate was higher under higher degrees of N-deficient conditions (e.g., C/N ratio of 360:1) than lower degrees of N-deficient conditions (e.g., C/N ratio of 3.6:1 and 36:1). Also, the most PHA accumulation was observed during the first 12 h after the PHA accumulation initiation. This study showed that the similar PHA accumulation could be achieved by using different accumulation periods depending on C/N ratios. N source presence was important for new cell production, supported by approximately ten times greater PHA accumulation under the N-deficient condition ($NH_4Cl$ 0.01 g/L) than the N-free (without $NH_4Cl$) condition after 96 h. C/N ratio of the rice straw hydrolysate was approximately 160:1, based on the glucose content, and this accumulated $0.36{\pm}0.0033g/L$ PHA with PHA content of $21{\pm}3.1%$ after 12 h. Since external C or N source addition for C/N ratio adjustment increases production cost, an appropriate accumulation period may be used for PHA accumulation from organic wastes, based on the PHA accumulation patterns observed at various C/N ratios and C and N concentrations.

토양컬럼을 이용한 합성하수 중의 질소제거 (Nitrogen Removal from Synthetic Domestic Wastewater Using the Soil Column)

  • 정경훈;임병갑;최형일;박상일;문옥란
    • 한국환경과학회지
    • /
    • 제16권6호
    • /
    • pp.707-714
    • /
    • 2007
  • A laboratory experiment was performed to investigate nitrogen removal by the soil column. The addition of 20% waste oyster shell to the soil accelerated nitrification in soil column. The $NO_3^--N$ concentration in the effluent decreased with the decrease of HRT(Hydraulic Retention Time). When methanol and glucose added as carbon sources, the average removal rates of T-N(Total Nitrogen) were 82% and 77.9%, respectively. The $NO_3^--N$ removal by methanol supplementation in soil column can likely be attributed to denitrification. In continuous removal of nitrogen using the soil column, the COD(Chemical Oxygen Demand) and $NH_4^+-N$ removed simultaneously in organic matter decomposing column. The greater part of $NH_4^+-N$ was nitrified by the percolated through nitrification column, and the little $NH_4^+-N$ was found in the effluent. The T-N of 87.4% removed at HRT of 36 hrs in denitrfication column. Because of nitrified effluents from nitrification column are low in carbonaceous matter, an external source of carbon is required.

Sustainable animal agriculture in the United States and the implication in Republic of Korea

  • Inkuk Yoon;Sang-Hyon Oh;Sung Woo Kim
    • Journal of Animal Science and Technology
    • /
    • 제66권2호
    • /
    • pp.279-294
    • /
    • 2024
  • Agriculture has played a significant role in the national economy, contributing to food security, driving economic growth, and safeguarding the dietary habits of the population. Korean agriculture has been compelled to focus on intensive farming due to its limited cultivation area, excessive input costs, and the limitations of agricultural mechanization. In the Republic of Korea (R.O.K), the concept of environmentally friendly animal agriculture began to be introduced in the early 2000s. This concept ultimately aims to cultivate sustainable animal agriculture (SAA) through environmentally friendly production practices, ensuring the healthy rearing of animals to supply safe animal products. Despite the government's efforts, there are still significant challenges in implementing environmentally friendly agriculture and SAA in the R.O.K. Therefore, the objective of this review is to establish the direction that the animal agriculture sector should take in the era of climate crisis, and to develop effective strategies for SAA tailored to the current situation in the R.O.K by examining the trends in SAA in the U.S. The animal agriculture sector in the U.S. has been working towards creating a SAA system where humans, animals, and the environment can coexist through government initiatives, industry research, technological support, and individual efforts. Efforts have been made to reduce emissions like carbon, and improve factors affecting the environment such as the carbon footprint, odor, and greenhouse gases associated with animal agriculture processes for animals such as cattle and pigs. The transition of the U.S. towards SAA appears to be driven by both external goals related to addressing climate change and the primary objectives of responding to the demand for safe animal products, expanding consumption, and securing competitiveness in overseas export markets. The demand for animal welfare, organic animal products, and processed goods has been increasing in the U.S. consumer market. A major factor in the transformation of the U.S. animal agriculture sector in terms of livestock specifications is attributed to environmentally friendly practices such as high-quality feed, heat stress reduction, improvements in reproductive ability and growth period reduction, and efforts in animal genetic enhancement.

압전 에너지 수확기의 성능 향상을 위한 복합재료 기반 소재 및 공정 기술 검토 (Composite-Based Material and Process Technology Review for Improving Performance of Piezoelectric Energy Harvester)

  • 김건수;장지운;김성륜
    • Composites Research
    • /
    • 제34권6호
    • /
    • pp.357-372
    • /
    • 2021
  • 에너지 수확장치는 석유자원의 고갈로 인한 자원난을 해결할 수 있는 대안으로 유망하다고 알려져 있다. 기계적 움직임을 전기 에너지로 전환할 수 있는 압전 소자들의 한계(환경오염 및 낮은 기계적 특성)를 극복하기 위하여, 고분자 기지재 기반 복합재료 압전 에너지 수확장치에 대한 많은 연구들이 수행되었다. 본 논문에서는 사용된 재료 및 공정에 기초하여, 보고된 압전 복합재료의 출력 성능 및 관련된 응용 분야를 검토하였다. 압전 필러는 티탄산 지르콘산 연 및 티탄산바륨 기반의 세라믹 필러뿐만 아니라, 친환경, 생체적합성 및 유연성 측면에서 유리한 산화아연을 검토하였다. 기지재는 폴리비닐리덴플로오라이드 및 공중합체로 구성된 압전 고분자 및 에폭시 및 폴리디메틸실록산 기반의 유연한 고분자로 분류하여 복합재료의 압전 시너지 및 높은 외력 적용에 의한 압전 출력 향상을 논의하였다. 또한, 금속 혹은 탄소 소재 기반 2차 필러의 적용에 의한 복합재료의 전도성 혹은 기계적 특성의 향상이 압전 수확장치의 출력 성능에 미치는 영향을 복합재료의 구조 측면에서 검토하였다. 향상된 성능으로 소형 전자기기, 스마트 센서, 의학 분야 등에 응용 가능한 복합재료 기반 압전 수확장치는 미래의 일상에서 접할 수 있는 무선 전자 장치의 전원으로써 잠재적인 통찰을 제공할 수 있다.

바이오필터와 황-석회석을 이용한 마을하수 처리 공정 개발 (Development of Process for Village Scale Wastewater Treatment Using Biofilter and Sulfur-limestone)

  • 김태규
    • 한국농공학회논문집
    • /
    • 제49권2호
    • /
    • pp.75-86
    • /
    • 2007
  • This process which has a connection of biofilter and sulfur-limestone has been developed to treat organic substances including BOD, COD and SS etc. and to treat sulfur-limestone is for denitrification.. The whole process consists of chemical reaction tank, sedimentation tank, trickling filter, denitrification tank The trickling filter is equipped with a reactor filled with absorptive filter, and the sulfur denitrification tank is filled with sulfur-limestone mixed media. After setting up practical facilities whose capacity is 60 tons a day, we have observed the removal efficiencies of pollutants through 60 experiments during Summer and Winter seasons. The average concentration of polluted water was BOD for 3.6 mg/L, $COD_{Mn}$ for 11.3 mg/L, SS for 2.8 mg/L, T-N for 8.6 mg/L, and T-P for 0.8 mg/L, and the rate of treatment efficiencies 96.5%, 84.7%, 96.5%, 79.2%, and 80.8%, respectively was found through the experiments. The average treatment efficiency for BOD and $COD_{Mn}$ was 85.0% and 55.7%, respectively and the average removal efficiency for NH4+-N was 84.9% in the trickling filter. The removal efficiency in the denitrification tank is as follows; The removal rate of $NO_3^--N$ was as high as 93.2% within the compass of pH 6.3 to 7.3 through $16.8{\sim}37.0mg/L$ flown into $NO_3^--N$ and $0.1{\sim}8.3mg/L$ outflown. It had observed that this process has implemented highly efficient and advanced treatment without external carbon sources and internal recycle during its process. In conclusion, this process is suitable for a sewerage in a small village due to the merits of low power consumption and easy maintenance.