• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.65-68
• /
• 2003

Using composite materials for lilting train system has many advantages such as manufacturing variety, specific high-strength & stiffness characteristics, and long-life durability, but the strongest advantage could be the possibility of lightweight product. In the leading countries, the composite materials are used for the material fer drivers' cabs, interior/exterior equipments for railway train, and it is now developing the composite materials applied for the train car body structure. In this paper, we examine the use of composite materials for the drivers' cabs and interior/exterior equipments for the developing tilting train in Korea, and review the car body design using composite materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.163-164
• /
• 2019

Curtain wall is constructed in various forms and designs by forming the exterior walls of a building, and refers to non-bearing walls that divide the exterior and interior spaces of a building. Curtain walls require not only wind pressure, but also waterproof, insulation, insulation, and durability, as well as the effects of recent frequent earthquakes. Studies on the sleeve used to connect the vertical member mullions in the process of high-rise curtain walls are insufficient. In this study, sleeves connecting curtain wall mullions were developed to absorb external displacement, and the purpose of this study was to evaluate economic feasibility through comparison with existing construction methods.

• 한국건축시공학회지
• /
• 제23권3호
• /
• pp.285-293
• /
• 2023

변경된 콘크리트 구조 내구성 설계기준과 콘크리트공사표준시방서에 규정된 탄산화에 대한 내구성평가와 관련된 사례를 조사하여 분석하고 실무적인 문제점을 분석한 결과 갑작스런 기준의 강화에 따른 경제적 부담이 높아졌음에도 인허가심의 과정에서의 우려로 외벽만 규정된 압축강도를 적용하고 나머지 구간에는 기존의 강도를 적용함으로써 시공성이 아주 불량해지고, 품질관리상 큰 부담이 있으며, 내구성평가기준이 모호한 한계를 극복할 수 있도록 사례를 제공하여야 할 것이며, 내구성을 확보대상을 명확히 하며, 공동주택에서 관행적인 층간 균열의 발생을 원천적으로 차단할 대책과 함께 유지관리단계의 균열관리 또한 규정에 반영하는 등 지난 2년간의 적용상 문제점을 종합적으로 분석하여 개정보완이 필요하다.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.149-156
• /
• 2011

In case of domestic pyrolysis dry distillation gassification technology, it stays at the stage of its early introduction and development. Moreover, the companies possessed of this technology are limited to Japan and some countries in Europe, and domestic operative performance of this system is nominal, so there exist a lot of difficulties in securing its basic data. In addition, considering its operation and management, there happens a corrosion of metals by the production of corrosive gases in time of combustion of waste, and there arise a problem of occurrence of low temperature corrosion on exterior casing or gas ducts of a combustion chamber due to the high temperature corrosion around the burner of an incinerator, lowering the durability of an incinerator. Therefore, this study looked at the problems arising in time of incineration by understanding the characteristics of the pyrolysis dry distillation gassification incinerating facility, and did research on the improvement plan for durability of an incinerator for more economic, efficient waste incineration.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권2호
• /
• pp.110-116
• /
• 2013

최근 건설 기술의 발달과 건설 환경 변화로 인하여 콘크리트 구조물이 대형화, 고층화되고 있으며 그에 따른 구조물 유지관리와 성능향상을 위한 보수 보강 및 주변환경과의 조화 등 외관을 중시하는 경향이 늘어가고 있다. 본 연구는 토목, 건축분야에서 사용되고 있는 콘크리트 구조물에 적용 가능한 친환경 내구성 도장에 관한 것으로, 기존 유 무기질계 도장재의 온도변화에 따른 신축성, 외벽과의 접착성, 균열과 박리로 인한 내구성 문제를 보완하고 외적 미관 향상에 목적이 있다. 그 방법으로 전처리 혼합물에 고농축 방수액과 접착증강재를 균일하게 혼합한 친환경 전처리 페인트를 조성하여 콘크리트 중성화방지, 내마모성, 은폐력, 접착력, 온도저항성, 내화학성등의 내구성 시험을 하였다. 그 결과, 친환경 전처리 페인트의 도장에 따른 은폐율은 시험기준인 0.96 이상으로 나타났으며, 내마모성시험에서도 일반 수성페인트값 75mg 보다 우수한 1mg의 값을 얻었으며, 인장강도는 방수시방서 기준보다 6.5배 크게 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권1호
• /
• pp.118-125
• /
• 2016

현재 대형 빌딩이나 공동주택에 건설되는 지하구조물은 건조수축, 시공이음, 폼타이부 등에서 콘크리트 균열로 인한 누수가 많이 발생되고 있다. 누수가 발생하게 되면 구조물의 지하공간은 결로, 곰팡이 등이 발생되어 지하 환경을 악화시키고 구조물의 콘크리트로 흡수되면 철근의 부식 등을 유발하여 구조물의 안전을 위협한다. 이는 지하구조물의 사용과정에서 장기적인 쾌적성과 구조물에 안전성이 고려되지 않은 설계와 시공의 결과이며 누수 하자에 대하여 유도배수처리로 대응하기 때문에 근본적인 누수보수가 이루어지지 않아 지하구조물은 항시 누수를 허용하고 있는 실정이다. 따라서 본 연구에서는 지하에 적용되는 방수공법을 내방수와 외방수로 분류하고 이를 바탕으로 지하구조물과 유사한 간이시험체를 제작하였으며, 결로가 많이 발생되는 동절기의 온도조건을 기준으로 지하환경의 방수공법별 습도변화량을 분석할 것이다.

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.110-115
• /
• 2016

The need for high-strength galvanized steel has recently increased because of the increased number of car consumers who want improved efficiency and exterior quality. High-strength galvanized steel with high corrosion resistance improves the durability of products and exterior quality. Furthermore, the gilt of zinc does not come off during machining because of the fine adhesive property of zinc. When these are welded, zinc has a lower melting temperature than iron, so zinc is more quickly vaporized than iron. Vaporized zinc can stick to electrodes, which increases spatter in welding transportation. Created spatter can enter the molten pool and develop into inner defects or blowholes and pits. Scattered spatter sticks to the product, which leads to the secondary cost of spatter removal. Therefore, in this study, comparisons of amounts of spatter generated are conducted according to the composition of shielding gas in the MIG and CMT processes to find optimal welding parameters.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.276-280
• /
• 2008

본 연구에서 개발할 설계기술은 부가가치가 매우 높은 소량 다품종 건축용 내 외장재의 금속 패널 코너가공 법에 관한 것이다. 금속 금구류 및 건축용 내 외장재로 사용되는 2.5mm이상 되는 금속강판을 사용함에 있어서 가장 문제가 되는 직각코너링 접합부위에서 발생되는 내식성(수명성), 내후성, 및 미려성(디자인)을 향상시키므로 품질의 향상뿐만 아니라 소량 다품종의 생산성을 증대시킬 수 있는 국내 최초 금속패널 코너가공을 할 수 있는 벤딩 다이시스템(Bending Die System)을 설계하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.137-140
• /
• 2009

Nowadays, the high performance composite materials are famous for the new construction materials as the construction buildings are bigger and higher. Out of them of all, the fiber reinforced concrete and mortar have been studied to develop and strengthen the performances of concrete, such as tensile strength, durability and the resistibility of crack. Also, it is considered that precast concrete is important alternatives of dry process for saving time, upgrading the material's quality and the productivity. Thus, PC panel is being produced for the use of dry wall as well as exterior finishing materials and it requires lots of tests and studies to be conducted to meet the various functional conditions. According to this study, it is considered that PVA fiber might be more effective than nylon fiber for developing the exterior PC panels.