• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.593-601
• /
• 2014

In this study, we investigated the methods of improving the capturing ability of acid fume by assessing the performance of slot-type external hood installed on both sides of an open surface tank for acid washing process. A field survey and the results of computational fluid dynamics revealed that capturing performance of existing hoods is very poor. To solve such problem, 'push-pull hood' that pushes from one side of an open surface tank and pulls on the other side was suggested. The initial prediction was that if a push-pull hood is used, the acid fume of an acid-washing tank surface could be moved towards the hood through the push flow. However, this study has confirmed that if the push flow velocity becomes too high, it could spread to other areas due to flooding from the hood. Therefore, if the push air supply is maintained at around 25 $m^3/min$(push 10 m/s), proper control flow is formed on the surface of a tank and acid fume that stayed at the upper part of the tank is smoothly captured toward the hood, significantly enhancing the capturing performance.

• Journal of Environmental Health Sciences
• /
• v.39 no.5
• /
• pp.456-464
• /
• 2013

Objectives: The aim of this study was to investigate the microbial contamination levels in elevators in apartment buildings and to provide information on such microbial contamination. Methods: A total of 144 samples, including from the exterior buttons, interior buttons, elevator handrails, walls, ventilators and airborne bacteria were collected in the morning and afternoon from July to August 2013 for six different elevators. The samples were used to detect sanitary indicator bacteria (total bacteria, coliform, and Escherichia coli), pathogenic bacteria (E. coli O157, L. monocytogenes, Salmonella spp., B. cereus, S. aureus) and fungi. Results: Contamination levels of total bacteria were 0.3-3.8 and 0.0-2.4 log CFU/100 $cm^2$ in the morning and afternoon, respectively. In the case of coliform bacteria, the levels were 0.0-3.7 log CFU/100 $cm^2$ in the morning and 0.0-0.3 log CFU/100 $cm^2$ in the afternoon. However, E. coli was not detected among all samples. Bacillus cereus, pathogenic bacteria, was only detected in 13 (11%) among 144 samples. E. coli O157, L. monocytogenes, Salmonella spp. and S. aureus were not detected among all samples. Comparing the samples collected in the morning and afternoon, we could confirm that the samples in the afternoon were cleaner. Conclusions: This study indicates that the samples in the afternoon were cleaner because these samples were collected following routine cleaning. Also, the levels of contamination in the elevators were low and the sanitary conditions were comparatively well-managed. Therefore it is deemed necessary for elevators be cleaned regularly to provide good conditions for people using elevators.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.215-224
• /
• 2011

Throughout the world, interest in issues relevant to energy, resources, environment, etc, is ever soaring. Therefore, the restoration of modern architecture that fulfilled its epochal function is working as a cultural, historic medium. In addition, it also plays its role in the side of environmental approach and so on. Moreover, the museum, which was only used for the possession of art collections and exhibition purposes, is currently expanding its scale and range as the center of culture and education. Also in reality, with the use of various programs, it is globally pursuing urban vitalizations. This study looks at the meaning of modem architecture restoration as well as its relationship with urban area. Furthermore, the purpose of this study is to look for design method's direction by finding the relevance between modem architecture restoration and museum during the restoration. This study is based on transformation and preservation scale during the restoration of modern architecture. It analyzed plane and design direction. Additionally, this study analyzed the architectural and regional effect caused by restoration. As a result, in accordance with the direction of museum and the usage, scale, structure as well as superficial aging condition of previous architecture, it shows difference in design methods in the process of restoration. The exterior of architecture was restored and preserved to its original form in order to show the symbolical form through historical value. This is essential to the modern museum. On the other hand, the interior of architecture put more value on utilization concept that its preservation and thus was restored accordingly. However, in all the cases, previous architecture were commonly used and even when alterations and additions were made due to aging and their change in usage, they were restored in a way that preserved and harmonized previous architecture. If the design method for restoration of modern architecture selects the restoration method by considering problems related to location, building value, structure, if it is studied from various angles and is restored after considering its usage as a museum, then we will be able to generate cultural and historical synergy effect. Furthermore, apart from architecture, it will have great impact on urban vitalizations.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.211-222
• /
• 2011

The Mireuksaji stone pagoda was built foundation in the reign of King Moo (AD 639) in the Baekje Kingdom of ancient Korea. The stone properties of the pagoda were quarried from Mountain Mireuk, which are medium to coarse-grained light gray biotite granite formed during the Jurassic, and are composed of quartz, feldspar, biotite, muscovite, apatite and allanite. It was strong relatively but became weak from prolonged weathering, and as a result its durability fell to $883kgf/cm^3$ (moderate weathering degree). In the process, cut-off (31%), deletion (57%) and crack (44%) occurred in foundation materials by the influence of bending, shear and compressive force. Hereat, the original materials were treated through a preservation process. As a result, approximately 74% of original materials have been able to be reused, inclusive of 55 materials that were to be partially replaced by new stones. On the other hand, it is inevitable that the other 26% including exterior stones and support-based stones have to be partially replaced by new stones. It implies that there is a need to find stones that are identical or similar to those of the pagoda. Consequently, a lithological study was conducted on stones in quarries located in Iksan and an investigation was made into their properties. The results showed that stones in the Hwangdeung area were most similar to those of the pagoda mineralogically and their properties were most stable.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.440-447
• /
• 2014

For this analysis, canopies of slender-spindle 'Hongro'/M9 apple trees were divided into 4 positions: upper, lower, exterior, and interior parts. The photosynthetic rate was highest in the external part of the upper canopy of the tree, where it was 4.5 times higher than in the internal part of the lower canopy. This difference was closely associated with differences in light penetration based on canopy position. Analysis of leaf growth characteristics showed that the leaves situated in the internal part of the canopy were larger and thinner than those in the external part of the canopy. The difference in leaf thickness was mainly due to thickness of the primary layer of palisade tissues (68.5 and $110.3{\mu}m$ for internal and external leaves, respectively). Fruit weight and quality were closely related to the extent of light penetration. Fruit weight, soluble solid content, and red skin color were higher in the fruits from the external part of the canopy. Thus, fruit maturity was delayed in the internal part of canopy. The fruit skin and wax layer were thicker in fruits from the internal canopy than in those from the external canopy. Therefore, our results indicate a need for improved light penetration in internal parts of the canopy and for split harvesting depending on maturity at different canopy positions.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.178-194
• /
• 2011

Due to the population growth of the old aged, Korea is also entering into an aging society. But a research on the pattern design to the old aged is much to be desired. The purpose of this research is to design skirt pattern fitted for each body type by categorizing the lower body type of the old aged woman. For the way of research, categorized the body type by using the female measuring size from the 65 years old to 99 years old which has been measured by the Korean body size research as an assay data, and base on this data, a suitable skirt pattern for each body type of the old aged woman was designed by practicing the exterior evaluation. The data analysis was done with the statistical treatment in SPSS 12.0, and the results are as follows. The lower body type of the old aged woman were divided into the type 1. The circumference article is the biggest compared to the height article regarding to the lower body type of the old aged woman. The type 2. The height article and the circumference and thickness articles are the poorest. The type 3. The height article is the biggest and the hip width and calf circumference are thicker than the waist width. The type 4. The height article is the lowest and the waist width is thicker instead the hip and leg are thinner. In type 1, The pattern was modified by increasing 1cm a length of the dart and raising up 1.2cm at the cross point between side line and waist line. In type 2, the basic pattern was used, and in type 3, using the outline of the basic pattern however, increased 1cm a length of the dart and modified the amounts of dart by handling the art in curve, and modified the waist line to be more three-dimensional curves by raising up 1 cm at the cross point between waist line and side line and falling down 0.5cm at the cross point between the back center line and the waist line. In type 4, modified the amounts of front and back dart to 1.25cm, and raised up 0.8cm at the cross point between side line and waist line, and modified the waist line and the side seam line in a gentle curve by reducing circumference of the skirt tail to 1cm from the side seam line.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.53-57
• /
• 2010

The influence of CaO addition on the crystallization temperature, crystal types, and microstructure of L-A-S ($Li_2O-Al_2O_3-SiO_2$) glass-ceramics system fabricated from a coal bottom ash, produced at thermal power plant, was studied. The glass transition and crystallization temperatures were shifted to the higher temperature position with increasing CaO content in a non-isothermal analysis using a DTA. The major crystalline phases of L-A-S glass-ceramics system produced were identified as ${\beta}$-spodumene ($LiAlSi_2O_6$) and eucryptite ($LiAlSiO_4$). The glass-ceramics showed a bulk and surface crystallization behavior at a time. With increasing CaO content, the ${\beta}$-spodumene peak in XRD increased and some CaO-related phases were formed. The surface crystal grown from the exterior to the center in glass-ceramics showed various shapes by amount of CaO added. Some cracks were generated at the glass-ceramics containing CaO above 9 wt% due to the mismatch of thermal expansion coefficients between a ${\beta}$-spodumene and CaO-related crystal phases.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.81-97
• /
• 1987

Two nozzles with different size (Figure 2) were particularly designed to supply air through the swirl core into the central part of the liquid stream in the same parallel direction to produce a well-mixed air and water in the whirl chamber as spray liquid in bubble formation. Atomization was attempted to improve by using both the preliminary break-up process with less viscosity and less surface tension in the whirl chamber and the effects of increased frequency of the band of drops with the raised ambient air density in front of the nozzle orifice. The volumetric ratio between spray liquid and air on four levels was used to investigate the effects of air as a component of the mixture on atomization. The results of the experiment were summarized as follows; Droplet size became progressively finer as the operating pressure was increased in the range of $0.70kg/cm^2$ to $6.33kg/cm^2$, which was similar to the previous works. The new atomizing mechanism so-called 'air-center nozzle' gave a narrower range in droplet size distribution with smaller volumetric median diameter (VMD) than that of the existing spray system at a given pressure, which showed the possibility of improvement of atomization in a certain limit. The volumetric median diameter produced by the new atomizing mechanism was decreased from the central region toward the exterior edges across the spray pattern.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.163-171
• /
• 2014

Based on the GPS/IMU integration, the car navigation has unstable conditions as well as drastically reduces accuracies in urban region. Nowadays, many cars mounted the camera to record driving states. If the ground coordinates of street furniture are known, the position and attitude of camera can be determined through SPR(Single Photo Resection). Therefore, an estimated position and attitude from SPR can be applied measurements in Kalman filter for updating errors of navigation solutions from GPS/IMU integration. In this study, the GPS/IMU/SPR integration algorithm was developed in loosely coupled modes through extended Kalman filters. Also, in order to analyze performances of GPS/IMU/SPR, simulation tests were conducted in GPS signal reception environments and the GCPs (Ground Control Points) distributions. In fact, the position and attitude gathered from GPS/IMU/SPR integration are more precise than the position and attitude from GPS/IMU integration. When IPs (image points), corresponded to GCPs, were concentrated in the center of image, the position error in the optical axis respectively increased. To understand effects from SPR, we plan to carry additional test on the magnitude of GCP, IP and initial exterior orientation errors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.4
• /
• pp.55-68
• /
• 1994

It has been generally agreed that the city form especially in the preindustrial age resembled their own world view, either in the western or the eastern cultural sphere. So, we aimed to redefine the characteristics of oriental world views compared with the western one, in order to find the relative nature of the Korean townscapes. It is said that the both world views(of western and oriental) are composed of the contrastive binary concepts in common, but there seems to have been nearly contrary differences in these two world views. Wheareas the former was based on the passively segregational and oppositional dualism, the latter, on the dynamically harmonious and complementary dualism, called generally as 'Yin(陰) and Yang(陽)'. Thus, the oriental world view can be thought as the 'philosophy of the relationship', which aim to unify the dualism ultimately with the help of this relationship. So, we can assume a certain third and intermediate concept between these dual concepts of the world view, which can unify these two into the one holistic whole. And the focuses of the most traditional oriental philosophies were concentrated on this, so called, 'the third concept', namely Taoistic 'Tochu(道樞)', Buddhistic 'Kong(空)' or Confucian 'Chung(中)'. And this triple concept, including the third one, of the oriental world view revealed a more concrete form of the cosmological relationship, as the triple structure; 'Heaven(天), Earth(地), and Man(人)', in which the 'Man' is thought as the middle or the center of the world. In this manner, we could found this oriental 'triple world view' was revealed in the real topology of most places in the Korean traditional city and the whole townscape itself. So, in the scale of houses and the roads around them, we can construe the 'Maru(a central board-floored room)' and the 'Madang(a inner court)' as the 'third and intermediate space(中)' between the interior space(陰) and exterior space(陽) in the former, and between the private house(陰) and the public residential road(陽) in the former case, and between the dual parts(陰,陽) of the city representing the contrary social classes and the contrastive visual landscapes. So, we insist that this 'triple world view' represented in the townscape can be one of the most important characteristics of Korean traditional townscape. And this third intermediate spaces, which generate the active social contact and the harmonious relationship among the people, can be the most important cues, as the central places, in the interpretation of the Korean townscapes even in contemporary circumstance, which inherits its spatial and social frame more or less from the preceding one.