• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2338-2356
• /
• 2019

Vehicular ad-hoc network (VANET) is the name of technology, which uses 'mobile internet' to facilitate communication between vehicles. The aim is to ensure road safety and achieve secure communication. Therefore, the reliability of this type of networks is a serious concern. The reliability of VANET is dependent upon proper communication between vehicles within a given amount of time. Therefore a new formula is introduced, the terms of the new formula correspond 1 by 1 to a class special ST route (SRORT). The new formula terms are much lesser than the Inclusion-Exclusion principle. An algorithm for the Source-to-Terminal reliability was presented, the algorithm produced Source-to-Terminal reliability or computed a Source-to-Terminal reliability expression by calculating a class of special networks of the given network. Since the architecture of this class of networks which need to be computed was comparatively trivial, the performance of the new algorithm was superior to the Inclusion-Exclusion principle. Also, we introduce a mobility metric called universal speed factor (USF) which is the extension of the existing speed factor, that suppose same speed of all vehicles at every time. The USF describes an exact relation between the relative speed of consecutive vehicles and the headway distance. The connectivity of vehicles in different mobile situations is analyzed using USF i.e., slow mobility connectivity, static connectivity, and high mobility connectivity. It is observed that $p_c$ probability of connectivity is directly proportional to the mean speed ${\mu}_{\nu}$ till specified threshold ${\mu}_{\tau}$, and decreases after ${\mu}_{\tau}$. Finally, the congested network is connected strongly as compared to the sparse network as shown in the simulation results.

• 한방재활의학과학회지
• /
• 제31권2호
• /
• pp.99-108
• /
• 2021

The study reports the clinical case of a patient with lower extremity weakness and gait disturbance treated with Korean medicine treatments including Chuna therapy. The patient suffered lower extremity weakness and gait disturbance with diagnosis of lumbar disk herniation and spinal stenosis. As a treatment, the doctor applied Chuna therapy, herbal medicine, acupuncture, pharmacopuncture, cupping and moxa. The effect of treatment was evaluated by numeral rating scale (NRS), self-walkable distance, functional independence measure (FIM), Oswestry disability index (ODI) and manual muscle test (MMT). NRS decreased from 6 to 4 at the leg. Self-walkable distance increased from 0 m to 10 m, FIM increased 85 to 96 points while ODI decreased 64% to 54%. MMT of hip flex and knee extension improved from grade 3+, grade 3 to grade 4, respectively. Korean medicine treatment can be effective for patients who suffer lower extremity weakness and gait disturbance due to lumbar disk herniation and spinal stenosis. Further clinical studies are required to verify these findings.

• The Journal of Advanced Prosthodontics
• /
• 제13권4호
• /
• pp.191-204
• /
• 2021

PURPOSE. The purpose of this study is to present a methodology to evaluate the accuracy of intraoral scanners (IOS) used in vivo. MATERIALS AND METHODS. A specific feature-based gauge was designed, manufactured, and measured in a coordinate measuring machine (CMM), obtaining reference distances and angles. Then, 10 scans were taken by an IOS with the gauge in the patient's mouth and from the obtained stereolithography (STL) files, a total of 40 distances and 150 angles were measured and compared with the gauge's reference values. In order to provide a comparison, there were defined distance and angle groups in accordance with the increasing scanning area: from a short span area to a complete-arch scanning extension. Data was analyzed using software for statistical analysis. RESULTS. Deviations in measured distances showed that accuracy worsened as the scanning area increased: trueness varied from 0.018 ± 0.021 mm in a distance equivalent to the space spanning a four-unit bridge to 0.106 ± 0.08 mm in a space equivalent to a complete arch. Precision ranged from 0.015 ± 0.03 mm to 0.077 ± 0.073 mm in the same two areas. When analyzing angles, deviations did not show such a worsening pattern. In addition, deviations in angle measurement values were low and there were no calculated significant differences among angle groups. CONCLUSION. Currently, there is no standardized procedure to assess the accuracy of IOS in vivo, and the results show that the proposed methodology can contribute to this purpose. The deviations measured in the study show a worsening accuracy when increasing the length of the scanning area.

• 한국수자원학회논문집
• /
• 제48권3호
• /
• pp.221-231
• /
• 2015

본 연구는 홍수 유출자료의 공간확장에 대한 중간 시설물 (e.g. 댐)의 영향 연구의 연장으로, 공간확장된 시간당 홍수 유출자료를 활용해 댐의 홍수조절 특성과 댐의 홍수저감률 변화를 공간적으로 분석하였다. 이를 위해 횡성댐과 충주댐의 직접적인 영향을 받는 남한강 본류를 연구중심지역으로 선정하였다. 댐의 홍수저감률에 대한 댐 자체 분석에 의하면 홍수사상 크기가 커질수록 댐의 홍수저감률이 작아지는 것을 횡성댐과 충주댐 모두 보였다. 두 댐의 영향을 받는 여주 수위관측소에서 유역면적의 비와 홍수저감률과의 관계는 댐이 포함하는 유역이 커질수록 홍수저감률이 커지는 특성이 있으며 선정된 수위관측소에서의 평균 홍수저감률은 유역면적비에 비해 작게 나타났다. 일예로, 첨두홍수량(peak discharge)을 기준으로, 횡성댐과 충주댐의 유역면적비가 0.02와 0.6인데 평균 홍수저감률이 0.01와 0.51로 나타났다. 댐에서 떨어진 거리의 수위관측소에서도 홍수의 크기에 따른 홍수저감률은 댐 자체의 홍수저감 특성과 동일하게 작용하였다. 댐의 홍수저감률에 대한 공간적 영향범위를 세 곳의 수위관측소(강천, 여주, 양평)를 기준으로 분석하였다. 이 과정을 통해 댐을 포함하는 유역면적의 7배에 해당하는 유역면적에서는 홍수저감률이 약 0.1이하로 떨어졌고, 최저 0.02까지 떨어지는 것을 관찰할 수 있었다.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.85-95
• /
• 2005

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle during One Hand Backhand Stroke and Two Hand Backhand in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head direction were defined. 1. In three dimensional maximum linear velocity of racket head the X axis and Y axis(horizontal direction) showed $-11.04{\pm}2.69m/sec$, $-9.31{\pm}0.49m/sec$ before impact, the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball. It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. The stance distance between right foot and left foot was mean $75.4{\pm}5.86cm$ during one hand backhand stroke and $72.6{\pm}4.67cm$ during two hand backhand stroke. 2. The three dimensional anatomical angular displacement of trunk in interna rotation-external rotation showed most important role in backhand stroke. and is follwed by flexion-extension. the three dimensional anatomical angular displacement of trunk did not show significant difference between one hand backhand stroke and two hand backhand stroke but the three dimensional anatomical angular displacement of trunk was bigger than one hand backhand stroke. 3. while backhand stroke, the flexion-extension and adduction-abduction of right shoulder joint showed significant different between one hand backhand stroke and two hand backhand stroke. the three dimensional anatomical angular displacement of right shoulder joint showed more flex and abduct in one hand backhand stroke. 4. The three dimensional anatomical angular displacement of left shoulder showed flexion, adduction, and external rotation at impact. after impact, The angular displacement as adduction-abduction of left shoulder changed motion direction as abduction. angular displacement of left shoulder as flexion-extension showed bigger than the right shoulder.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 춘계학술대회논문집
• /
• pp.155-164
• /
• 1995

For efficient operation, vital hand controls must be easily controlled by the operator from his normal working position. The primary working area based on operator's working comfort was developed to serve as a design guideline tothe control panel layout. Ten male subjects participated in the experiment in which working comfort was measured for two controls of a lever type control and a knob type control with respect to the frontal and sagittal distances from the body center and the slope of a workplace. The response surface methodolgy using a central composite design was employed to develop a prediction model for perceived working comfort of each control. Both controls have a similar pattern of comfortable working area, but the lever type control has slightly broader working area. The concept of the proposed working area is a significant extension to the conventional working area such as Farley's or Squires' curves. It is shown that the distance toa control device and the slope have a quadratic effect to working comfort. It is noticeable that comfortable working area exists outside the conventional working area. The result of the response surface analysis also indicated that a little slope of about 15 .deg. for a control panel improves working comfort.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제26권2호
• /
• pp.39-47
• /
• 2020

Purpose: Clinical laboratory of hospital has been demanded to extension or relocation regarding with the test number increase and analyzer development. Space area criteria per test numbers, lab functions, hospital bed and lab staffs are needed for draft space programing. So, the purpose of this study is to provide the space area guideline of clinical laboratory for space calculation in planning and design the spatial environment. Methods: Literature review has been used in checking the standards and guidelines. And questionnaire surveys to laboratory supervisors in hospitals have been conducted for the data collection. 60 answers have been analysed statistically by MS Excel program. Results: The result of this study can be summarized into three way calculations. The first one shows that the basic standard workspace and distance is applied in lab design. The second one shows that average space area criteria resulted from case studies is applied by 19㎡ per one staff, 0.9~1.0㎡ per one bed, and lastly linear length calculation of workbenches and analyzers on the bench top and floor mount, is multiplying it by the sum of the counter depth plus aisle width. Implications: In updating the space area calculation guidelines, it is necessary to cooperate with medical staffs and designers.

• 보존과학회지
• /
• 제8권1호
• /
• pp.23-27
• /
• 1999

본 연구는 갈색부후균인 Tyromyces palustris와 Gloeophyllum traseum에 의해 인공적으로 부후된 소나무 시험편을 대상으로 붕산염 막대를 이용한 부후재 구제처리 가능성을 조사하기 위해 수행하였다. 붕산염 막대 처리에 의한 구제처리, 즉 붕산염 막대로부터 화산${\cdot}$이동된 붕소 성분에 의한 기 존재하던 부후균의 박멸과 그 후 부후재에 잔존하는 붕소 성분에 의한 부후균의 재가해 예방이 가능함을 알 수 있었다. 그러나 보다 효과적인 구제처리를 위해서는 붕산염 막대 삽입 지점으로부터 확산거리에 따른 붕소 성분의 보유량 경사를 완만하게 하여 줌이 필요한데, 앞으로 확산기간의 연장과 붕소 투여량이 붕소 성분의 보유량 경사에 미치는 영향에 대한 연구가 필요하다고 본다.

• Computers and Concrete
• /
• 제18권3호
• /
• pp.337-354
• /
• 2016

To study the influence on fracture properties of reinforced concrete wedge splitting test specimens by the addition of reinforcement, and the restriction of steel bars on crack propagation, 7 groups reinforced concrete specimens of different reinforcement position and 1 group plain concrete specimens with the same size factors were designed and constructed for the tests. Based on the double-K fracture criterion and tests, fracture toughness calculation model which was suitable for reinforced concrete wedge splitting tensile specimens has been obtained. The results show that: the value of initial craking load Pini and unstable fracture load Pun decreases gradually with the distance of reinforcement away from specimens's top. Compared with plain concrete specimens, addition of steel bar can reduce the value of initial fracture toughness KIini, but significantly increase the value of the critical effective crack length ac and unstable fracture toughness KIun. For tensional concrete member, the effect of anti-cracking by reinforcement was mainly acted after cracking, the best function of preventing fracture initiation was when the steel bar was placed in the middle of the crack, and when the reinforcement was across the crack and located away from crack tip, it plays the best role in inhibiting the extension of crack.

• 융합보안논문지
• /
• 제14권6_2호
• /
• pp.25-33
• /
• 2014

CCTV는 인적이 드문 장소에서 거리의 눈으로 작용하여 추후 증거로 활용될 수 있으므로 범죄검거측면에서도 효율적으로 작용할 수 있는 도구라고 평가할 수 있다. 대다수 범죄가 과학적인 방법을 사용하여 지능적으로 은밀하게 이뤄지며, 범행이 매우 흉포한 경우가 많아지고 있다. 점점 지능화 은밀화되는 범죄양상에 비추어 범죄현장의 녹화장면을 포착하는 CCTV의 특성상 증거자료 획득 및 범인의 발견 체포가 용이하다는 장점으로 그 필요성이 점점 커지고 있다. 그러나 CCTV중 화질의 사양이 낮거나 야간녹화가 어려운 경우가 많아 더 높은 화질로 개선이 필요하고 야간녹화가 가능하여야 범죄에 대한 단서나 증거로서 유용하게 활용할 수 있다. 또한 방범용 CCTV의 통합 관제시스템 구축을 통하여 용이하게 증거를 획득할 수가 있고 보존기간을 연장하여야 CCTV가 증거자료로서 효력을 발휘할 수가 있다고 본다.