• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_2
• /
• pp.643-651
• /
• 2012

Object recognition belongs to high-level processing that is one of the difficult and challenging tasks in computer vision. Digital photogrammetry based on the computer vision paradigm has begun to emerge in the middle of 1980s. However, the ultimate goal of digital photogrammetry - intelligent and autonomous processing of surface reconstruction - is not achieved yet. Object recognition requires a robust shape description about objects. However, most of the shape descriptors aim to apply 2D space for image data. Therefore, such descriptors have to be extended to deal with 3D data such as LiDAR(Light Detection and Ranging) data obtained from ALS(Airborne Laser Scanner) system. This paper introduces extension of chain code to 3D object space with hierarchical approach for segmenting point cloud data. The experiment demonstrates effectiveness and robustness of the proposed method for shape description and point cloud data segmentation. Geometric characteristics of various roof types are well described that will be eventually base for the object modeling. Segmentation accuracy of the simulated data was evaluated by measuring coordinates of the corners on the segmented patch boundaries. The overall RMSE(Root Mean Square Error) is equivalent to the average distance between points, i.e., GSD(Ground Sampling Distance).

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.4
• /
• pp.83-91
• /
• 2018

Land reclamation, coastal construction, coastline extension and port construction, all of which involve dredging, are increasingly required to meet the growing economic and societal demands in the coastal zone. During the land reclamation, a portion of landfills are lost from the desired location due to a variety of causes, and therefore prediction of sediment transport is very important for economical and efficient land reclamation management. In this study, laboratory disposal tests were performed using an open channel, and suspended sediment transport was analyzed according to flow velocity and grain size. The relationships between the average and standard deviation of the deposition distance and the flow velocity were almost linear, and the relationships between the average and standard deviation of deposition distance and the grain size were found to have high non-linearity in the form of power law. The deposition distribution of sediments was demonstrated to have log-normal distributions regardless of the flow velocity. Based on the experimental results, modeling of suspended sediment transport was performed using deep neural network, one of deep learning techniques, and the deposition distribution was reproduced through log-normal distribution.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.2 no.1
• /
• pp.71-82
• /
• 2004

To compare the effectiveness of the hemisling, bobath sling, extension-type sling, and the newly designed Modified Triangular Bobath Sling with Distal Support on a hemiplegic shoulder subluxation. Fourteen hemiplegic patients with shoulder subluxation were evaluated by a simple X-ray with and without the slings and the vertical and horizontal distances on the plain AP views were measurement. The newly designed arm sling was compared in terms of the effects of correction with distal support attached with shoulder saddle sling. The arm sling designed for this study was developed for the purpose of maintaining patients hands in a functional position and performing ROM exercise of the shoulder easily, and prevention or correction to shoulder subluxation. The mean values of the vertical and horizontal distance were compared to determine if there was significant difference of function between the new sling and the conventional slings. The new sling provided the patients with good vertical correction of the subluxation(p<0.05) but did not increase the horizontal distance significantly. These results support the effectiveness of a new sling to decrease subluxation in hemiplegia. Further study on the long term effects or complication of the new sling is recommended.

• Bulletin of the Korean Mathematical Society
• /
• v.59 no.1
• /
• pp.119-139
• /
• 2022

This paper deals with the λ-labeling and L(2, 1)-coloring of simple graphs. A λ-labeling of a graph G is any labeling of the vertices of G with different labels such that any two adjacent vertices receive labels which differ at least two. Also an L(2, 1)-coloring of G is any labeling of the vertices of G such that any two adjacent vertices receive labels which differ at least two and any two vertices with distance two receive distinct labels. Assume that a partial λ-labeling f is given in a graph G. A general question is whether f can be extended to a λ-labeling of G. We show that the extension is feasible if and only if a Hamiltonian path consistent with some distance constraints exists in the complement of G. Then we consider line graph of bipartite multigraphs and determine the minimum number of labels in L(2, 1)-coloring and λ-labeling of these graphs. In fact we obtain easily computable formulas for the path covering number and the maximum path of the complement of these graphs. We obtain a polynomial time algorithm which generates all Hamiltonian paths in the related graphs. A special case is the Cartesian product graph K_n☐K_n and the generation of λ-squares.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.5
• /
• pp.333-339
• /
• 2002

This study was conducted to obtain the basic data for practical use of the Polygonatum genetic resources. The 20 collections were analyzed by principal component analysis of 8 characters and cluster analysis. In the principal analysis, the first, the second and the third components contributed 54.10%, 18.95% and 11.62% of the variations, respectively. The cumulative contribution from the first to the third principal components was 84.68%. The first principal component was related to shape and size of plant, and assimilatory, reserve and reproductive organs. The second principal component was related to growth and development of plant, and reserve organ. And the third principal component was related to growth and development of plant. Based on cluster analysis, the 20 collections were classified into 4 distinct groups with the average distance greater than 0.7 between groups. Group I was Polygonatum sibiricum $D_{ELAR}$ and Group II included P. odoratum var. pluriflorum $O_{HWI}$, P. odoratum var. pluriflorum $O_{HWI}$ for 'Variegatum' Y. Lee, for. nov., P. odoratum var. thunbergii $H_{ARA}$ and P. odoratum var. maximowiczii $K_{OIDZ}$. GroupIII was P. involucratum $M_{AXIM}$, P. desoulavyi $K_{OMAROV}$ and P. humile $F_{ISHER}$ ex. $M_{AXIM}$. And GroupIV included P. lasianthum var. coreanum $N_{AKAI}$ and P. inflatum $K_{OMAROV}$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.143-166
• /
• 1999

The success of porcelain laminate veneer depends on the bond strength between tooth structure and ceramic restoration and the design of tooth preparation. In particular, incisal coverage and incisal finish line are the two most important factors in long-term fracture resistance. Although the majority of clinicians are practicing incisal coverage and there are various opinions on the geo-metrical ratio between the clinical crown length of the remaining tooth structure and the length of incisal extension in porcelain laminate veneer and the optimal incisal finish lines. scientific evidence still loaves much to be desired. The purpose of this study was to determine the effects of the amounts of incisal coverage and the types of incisal finish line on the stress distribution in maxillary anterior porcelain laminate veneers under two different loading conditions. Three-dimensional finite element models of a maxillary anterior porcelain veneer with differ-ent amounts of incisal coverage ; 0, 1, 2, and 3mm and different incisal finish lines feathered edge, incisal bevel, reverse bevel and lingual chamfer with various amounts of lingual extension were developed. 300N force was applied at the point 0.5mm cervical of the linguoincisal edge in two loading conditions ; A) 125 degrees, B) 132 degrees. Tensile and compressive stress in ceramic and shear stress in the resin cement layer were analyzed using three-dimensional finite element method. The results were as follows : 1. The types of incisal finish line had more influence on the stress distribution in porcelain laminate veneer than the amounts of incisal coverage. 2. In case of no incisal coverage, incisal beveled laminate exhibited more evenly distributed tensile stress than feathered edged laminate. And in case of incisal coverage, reverse beveled laminate and lingual chamfered laminate with 1mm lingual extension exhibited more evenly distributed tensile stress than lingual chamfered laminates with 2mm and 3mm lingual extension. 3. As long as the lingual chamfer goes, less tensile stress was found at the incisal edge, while much more tensile stress was found at the lingual margin area in proportion to the length of lingual extension. 4. Under 125 degree load, tensile stress in porcelain laminate veneer had increased compared with that under 132 degree load and the difference exhibited by the change of the amount of tooth support was larger. 5. The types of incisal finish line and the distance from the incisal finish line to the loading point had more influence on the shear stress distribution in the resin cement layer than the amounts of incisal coverage. In contrast loading condition had little influence.

• Korean Journal of Plant Resources
• /
• v.15 no.3
• /
• pp.260-268
• /
• 2002

Morphological characteristics and growth patterns of 20 Polygonatum collections indigenous to Korea were examined and the collections were classified to obtain the basic data for practical use of Polygonatum genetic resources. Based on the cluster analysisi 20 collections were distinctly classified into seven groups with average distance greater than 0.6 between groups. Group I was p. sibiricum Delar, and group II included p. odoratum var. pluriforum Ohwi, P. odoratum var. pturiforum Ohwi 'Variegata' and P. odoratum var. maximowiczii Koidz.. Group III was P. odoratum var. thunbergii Hara, group IV included P. lasianthum var. coreanum Nakai, and group V was P. involucratum Maxim. and P. desoulavyi Komarov. group Ⅵ was P. inflatum Komarov and group Ⅶ was P. humile Fischer ex. Maxim. Morphologically, group I was larger than the other groups, group II and III were medium, and group IV to Ⅶ were small. In the classification of genus Polyognatum, stem length, stem habit, phyllotaxis, stem angularity, petiole, inflorescence, perianth, bract and rhizome were particularly important characters. Group I to III were thought to be useful as the edible and medicinal resources plants, and group IV to Ⅶ were thought to be useful as ornamental plants.

• Korean Journal of Environment and Ecology
• /
• v.30 no.2
• /
• pp.165-172
• /
• 2016

Mallard and Spot-billed ducks that are typical wintering water birds use the wide rice field in the center of the water system as a wintering ground. I try to figure out the daily movement distance from Home-Range to wintering ground for mallard and spot-billed ducks in Mangyunggang, Dongjingang where located in central region. In 2015 wintering period by using a Cannon-net, I attached WT-300 to 5 mallard and 5 spot-billed ducks. Daily movement distance is an overall average 0.89km, the largest distance was 31.09km. Daily movement distance of mallard was 0.97km, the largest distance was 28.78km. Daily movement distance of Spot-billed ducks was 0.80km, the largest distance was 33.39km. Home-Range analysis is used by the SHP files that is compatible with GIS and ArcGIS 9.0 Animal Movement Extension, it was analyzed using the Minimum Convex Polygon Method (MCP) and the Kernel Density Estimation (KDE). The behavior rights of two kinds of ducks was $490.34km^2$ by Minimum Convex Polygon Method (MCP) ($SD=311.20km^2N=10$), an important habitats Kernel Density Estimation (KDE 50%) was $42.24km^2$. Home-Range of Mallard (MCP) was $568.02km^2$, it is wider than home-range(MCP) of spot-billed duck $397.13km^2$ relatively, the core habitats of mallard is $53.05km^2$, it is wider than mallard's core habitats(KDE 50%) $29.26km^2$ relatively.

• The Journal of Korean Physical Therapy
• /
• v.25 no.5
• /
• pp.288-296
• /
• 2013

Purpose: This study was conducted in order to determine whether mechanical horseback-riding training depending on velocity can improve vestibular function and static postural balance on standing in healthy adults. Methods: For evaluation of vestibular function, electrooculography (EOG) of vertical and horizontal was performed for identification of the motion of eyes. For evaluation of static postural balance, COP distance, time spent on the sharpened Romberg test with neck extension (SRNE) were measured. Measurements were performed three times before training, three weeks after training, and six weeks after training. Participants were randomly assigned to three groups: fast velocity-mechanical horse -riding training (FV-MHRT, n=12), moderate velocity-mechanical horse-riding training (MV-MHRT, n=12), and slow velocity-mechanical horse-riding training (SV-MHRT, n=12). Results: According to the result for vertical, horizontal EOG, there was significant interaction in each group in accordance with the experiment time (p<0.05). The FV-MHRT group showed a significant decrease compared with the MV- MHRT, SV-MHRT groups (p<0.05). According to the result for static postural balance, the time spent, COP distance in SRNE showed significant interaction in each group in accordance with the experiment time (p<0.05). The time spent on the SRNE showed a significant increas in FV-MHRT, SV-MHRT (p<0.05). The COP distance of SRNE showed a significant increase in MV-MHRT (p<0.05). Conclusion: The MHRT velocity activated mechanism of vestibular spinal reflex (VSR), vestibular ocular reflex (VOR), also helped to strengthen vestibular function and static postural balance. In addition, it should be applied to different velocity of MHRT according to the specific purpose.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.3
• /
• pp.185-191
• /
• 2016

Background: Failure to maintain a patent airway can result in brain damage or death. In patients with mandibular prognathism or retrognathism, intubation is generally thought to be difficult. We determined the degree of difficulty of airway management in patients with mandibular deformity using anatomic criteria to define and grade difficulty of endotracheal intubation with direct laryngoscopy. Methods: Measurements were performed on 133 patients with prognathism and 33 with retrognathism scheduled for corrective esthetic surgery. A case study was performed on 89 patients with a normal mandible as the control group. In all patients, mouth opening distance (MOD), mandibular depth (MD), mandibular length (ML), mouth opening angle (MOA), neck extension angle (EXT), neck flexion angle (FLX), thyromental distance (TMD), inter-notch distance (IND), thyromental area (TMA), Mallampati grade, and Cormack and Lehane grade were measured. Results: Cormack and Lehane grade I was observed in 84.2%, grade II in 15.0%, and grade III in 0.8% of mandibular prognathism cases; among retrognathism cases, 45.4% were grade I, 27.3% grade II, and 27.3% grade III; among controls, 65.2% were grade I, 26.9% were grade II, and 7.9% were grade III. MOD, MOA, ML, TMD, and TMA were greater in the prognathism group than in the control and retrognathism groups (P < 0.05). The measurements of ML were shorter in retrognathism than in the control and prognathism groups (P < 0.05). Conclusions: Laryngoscopic intubation was easier in patients with prognathism than in those with normal mandibles. However, in retrognathism, the laryngeal view grade was poor and the ML was an important factor.