• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.20-26
• /
• 2004

The purpose of this study is to investigate the transition mechanism and prevention mechanism of gas explosion to fire. Transition phenomena of explosion to fire of LPG in the explosion vessel of its size of TEX>$100 cm {\times} 60 cm {\times} 45 cm$ was visualized using the high speed video camera and the mechanism was analysed from the videograph. Newspaper size of $30cm {\times} 20cm$ was used for combustible sample in this experiments and LPG-air mixture was ignited by 10 ㎸ electric spark. Experimental parameter was gas concentration, size of vent area and position of combustible solid. Size of vent area were varied as $10cm {\times} 9cm, 13cm {\times} 10cm, 27cm {\times} 20cm, 40cm {\times} 27cm$, and the position of combustible was varied in 4 point. Carbon dioxide was used to study the prevention mechanism of explosion to fire transition of LPG. Based on this experiment we can find that transition possibility of explosion to fire on solid combustible from explosion is depends on concentration of LPG-air mixture and the exposure time of solid combustibles in high temperature atmosphere of flame and burnt gas. And cooling or inerting of the atmosphere after explosion can be prevent the transition of explosion to fire on solid combustibles from gas explosion.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.495-501
• /
• 2016

Mineral oil has been widely used as an insulating oil for electrical transformers for a long time, but the necessity of employing new insulation oil such as vegetable oil has been increased due to urgent needs for the biodegradability when it leaks and also for the thermal stability at a higher operation temperature. Although specific periods are required between the production and consumption, there are still short of the data to prove the insulation oils' storage stability depending upon various circumstances and their resources. Thus, this paper demonstrates the insulation oils' oxidation characteristics of both mineral and vegetable oils when each was exposed to different environments for 12 weeks. From this test, some properties including total acid number, water content and dielectric breakdown were changed under specific conditions and resources. Vegetable oils showed higher hydrophilicity and water saturation than those of mineral oils due to their molecular compositions. Under sunlight exposure condition, all insulation oils oxidized and changed their properties when exposing to the direct light, regardless of the resource used.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.17-22
• /
• 2011

In this study, formaldehyde in various fisheries products was previously derivatized with acetylacetone and subsequently analyzed by using HPLC-PDA. The formaldehyde contents ranged from 0.07 to 73.74 mg/kg. The compound was significantly higher in both mollusks (0.34-12.38 mg/kg) and crustaceans (0.09-73.74 mg/kg) than in fish (0.07-3.35 mg/kg) and shellfish (0.50-3.90 mg/kg). This difference was due to storage time and temperature. In general, fish and shellfish are sold live or in refrigerated form with shorter a shelf-life, but mollusks and crustaceans are distributed in cold or frozen systems with a longer shelf-life. Using food intake data from a report of the National Health and Nutrition Survey, the daily human exposure level to formaldehyde was 0.58% of the ADI. The results from this study might provide fundamental information to confirm naturally-originating or fraudulent formaldehyde treatment in fisheries products.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.1
• /
• pp.7-16
• /
• 1995

In countries where confucianism is popular, it is extremely hard to get fresh cadaver bone for allograft. Therefore in Korea, the reimplantation of resected autoclaved autogenous bone segments has been increasingly performed for limb reconstruction of extremities with malignancies. To preserve the bone morphogenetic protein and mechanical strength of heated bone, many studies have reported that pasteurization of bone is far better than autoclaving over $100^{\circ}C$. Based on this assumption, replacement with a pasteurized autogenous bone graft after resection of a malignant bone tumor was deemed feasible for reconstruction. However, little is known about how high a temperature and how much time for pasteurization is needed to make tumors completely necrotic and to maintain the mechanical strength of bone. Consequantly, experimental studies were carried out to test heat conductivity of human bone and torsional strength of porcine tibia after pasteurization. First, two pairs of human proximal tibia and distal femur were used. We used T-type thermocoples to check core temperature of the bone and a computerized data acquisition system to record results. Without reaming of the medullary cavity, in a $60^{\circ}C$-thermostatic saline tub, it took 32 minutes and 50 seconds to raise the core temperature of human proximal tibia from $20^{\circ}C$ to $58^{\circ}C$, and 30 minutes for distal femur. In a $80^{\circ}C$ saline tub, it took 12 minutes and 50 seconds for proximal tibia, and 11 minutes and 10 seconds for distal femur. In contrast, using porcine tibia whose cortical thickness is similar to that of human tibia, after reaming of the medullary canal, it took less than 3 minutes and 30 seconds in a $60^{\circ}C$ saline tub, less than 1 minute and 45 seconds in a $70^{\circ}C$ tub, and less than 1 minute in a $80^{\circ}C$ tub to elevate core temperature from $20^{\circ}C$ to $58^{\circ}C$. Second, based on data of the heat conductivity test, we compared the torsional strength before and after pasteurization. Twenty matched pairs of porcine tibia were used, The left one was used as a non-heated control group and the right one as a pasteurized experimental group. Wighout reaming of the medullary cavity, there was no statistical difference in torsional strength between the pasteurization of the $60^{\circ}C$-35minute and of $80^{\circ}C$-15minute. With reaming, we also found no statistical difference among pasteurization of $60^{\circ}C$-15 minute, of $70^{\circ}C$-15 minute, and of $80^{\circ}C$-15 minute groups. In conclusion, reaming of the medullary canal is very helpful in saving pasteurization time. And, in a $60^{\circ}C$ saline tub, no significant weakness in torsional strength occurs with pasteurization of the bone for up to 35 minutes. Also no significant weakness in torsional strength occurs with an exposure of 15 minutes to the $80^{\circ}C$ saline tub.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.159-166
• /
• 2011

This research was performed to evaluate physical properties of polysulfide epoxy overlay material for bridge deck as part of a review for possibility of domestic application of polymer concrete for bridge deck pavement. In order to evaluate strength characteristics, compressive strength, flexural strength and bond strength were tested, and, for durability characteristics, chloride ion penetration resistance and freeze/thaw resistance were tested along with ultraviolet rays impact evaluation. The tests showed that the results met the criteria suggested by the American Concrete Institute in terms of compressive strength, flexural strength and bond strength. However, in terms of the strengths measured at various test temperatures, it was found that the epoxy material was highly dependent on temperature, and, therefore, this should be considered at the time of domestic application of the epoxy material later. Deflection characteristics was checked through flexural strength test and it was found that bridge deck pavement using the epoxy material was excellent compared to bridge deck pavement using asphalt. Furthermore, the results of chloride ion penetration resistance test and freeze/thaw resistance test were also excellent. In the evaluation of ultraviolet rays impact on epoxy slurry mixture, reduction of strain was noticed with increased strength, but the deflection characteristics after exposure to ultraviolet rays was better than the existing acryl polymer concrete. Therefore, it is concluded from the research that the polysulfide epoxy overlay material has the physical properties that are appropriate to pavement of bridge deck.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.484-491
• /
• 2005

Quantitative microbial risk assessment (QMRA) analyzes potential hazard of microorganisms on public health and offers structured approach to assess risks associated with microorganisms in foods. This paper addresses specific risk management questions associated with Staphylococcus aureus in kimbab and improvement and dissemination of QMRA methodology, QMRA model was developed by constructing four nodes from retail to table pathway. Predictive microbial growth model and survey data were combined with probabilistic modeling to simulate levels of S. aureus in kimbab at time of consumption, Due to lack of dose-response models, final level of S. aureus in kimbeb was used as proxy for potential hazard level, based on which possibility of contamination over this level and consumption level of S. aureus through kimbab were estimated as 30.7% and 3.67 log cfu/g, respectively. Regression sensitivity results showed time-temperature during storage at selling was the most significant factor. These results suggested temperature control under $10^{\circ}C$ was critical control point for kimbab production to prevent growth of S. aureus and showed QMRA was useful for evaluation of factors influencing potential risk and could be applied directly to risk management.

• The Korean Journal of Malacology
• /
• v.28 no.4
• /
• pp.313-319
• /
• 2012

Mass production method on artificial seedling production of hard clam Meretrix petechialis was developed indoor culture system. Spawning of adult clam (SL $65.8{\pm}8.4mm$) was induced using the combined method of air exposure and water temperature raising. The fertilized eggs were developed to D-shaped larvae after 17.7 hours at $27^{\circ}C$ and hatching rate was 6.1%. Shell length (SL) of D-shaped larvae was measured to be $131.4{\pm}2.6{\mu}m$ and thereafter the larvae grew to the settled spats with SL $190.2{\pm}7.5{\mu}m$ in 4 days. Estimated survival rate of settled spats was 48.1%. Spat collection on 130,000 spats with SL $0.19{\pm}0.01mm$ performed conducted by sand bottom circulation filtering method. Collected spats grew up to $3.1{\pm}0.8mm$ in 46 days, $6.6{\pm}1.8mm$ in 87 days, and $10.5{\pm}0.9mm$ in 114 days. The relative growth between SL and shell height (SH) was calculated to be SH = 0.8501SL + 0.0196 ($R^2=0.9987$) during the whole spat period. During spats rearing, they were suffered from one time of mass mortality at SL 3.1 mm, but 51,000 spats were finally survived with the rate of 39.2% at 114 days of spat rearing in indoor tank system.

• Journal of Life Science
• /
• v.29 no.2
• /
• pp.272-278
• /
• 2019

The silkworm performs sexual reproduction for the production of its healthy offsprings from generations to generations. Parthenogenesis in the silkworm, Bombyx mori acquires immense use in the development of outstanding homozygouse lines with higher viability, hybrid vigour, combining ability and less phenotypic variability, and it can serve as a powerful tool in controlling sex of the offsprings as well as a useful tool in selection of breeding schemes. However, naturally occuring parthenogenesis in silkworm could not be found so far. Fortunately, artificial induction of parthenogenesis is possible in silkworm. So, it is very important to find out novel methods for induction of parthenogenesis. We investigated to attempt to get a novel parthenogenetic method. Accordingly, parthenogenetic studies on between unfertilized in vivo ovarian eggs of live silkworm moth(novel) and unfertilized in vitro ovarian eggs(conventional) taken out from live silkworm moth were investigated by hot water ($46^{\circ}C$), hot air ($46^{\circ}C$) and low temperature ($0^{\circ}C$ and $-20^{\circ}C$) treatments. The best ratio of parthenogenetic eggs was obtained with in vivo ovarian eggs of live silkworm moth rather than with in vitro ovarian eggs taken out from live silkworm moth in all the treatments. The optimum exposure time absolutely depended upon the temperatures of treatments and the forms of in vivo or in vitro ovarian eggs. From these results, we expect that in vivo artificial parthenogenetic treatments on live silkworm moth will be useful for the higher induction of parthenogenesis in the silkworm, B. mori.

• Journal of the Korean Society of Radiology
• /
• v.4 no.4
• /
• pp.25-28
• /
• 2010

In this paper, the fabrication and feasibility study of clinical application with euripium doped gadollium oxide ($Gd_2O_3$:Eu) nano phosphor derived by low-temperature solution combustion method. From the fabricated phosphor, the photoluminescent characteristic and linearity as a function of phosphor film thickness were investigated to evaluate x-ray converstion properties. From the experimental results, the luminescent intensity was $2945pC/cm^2$-mR at $270{\mu}m$ $Gd_2O_3$:Eu film and this value is higher 1.2 time the conventional bulk phosphor, which is possible to imaging acquisition. And good linearity was shown at x-ray exposure range for clinical diagnostic application.

• Korean Journal of Weed Science
• /
• v.5 no.1
• /
• pp.43-49
• /
• 1985

This study was conducted to investigate the existance of dormancy in newly collected tubers of Eleocharis kuroguwai Ohwi from paddy fields and to determine the effect of various growth regulators on the bud sprouting and tuberization of E. kuroguwai. The maximum percent sprouting of E. kuroguwai collected at every month during winter was less than 60% regardless of varied collection tunes until 50 days after incubation, suggesting the presence of dormancy in E. kuroguwai tubers. This dormancy was markedly broken as the time went by, probably due to the exposure of tubers the extremly low temperature. The treatment of $BA10^{-3}M$ and $BA10^{-3}+GA10^{-6}M$ increased bud sprouting about 10 and 11 times, respectively, than that of the untreated control indicating that BA seems to be one of the most effective agents among the growth regulators used on the bud sprouting of E. kuroguwai. Foliar application of BA increased tuberization of E. kuroguwai by an average of 34.4% as compared with the untreated control. The highest increase, 39.8% was obtained with BA treatment at $10^{-5}M$.