• Journal of Environmental Health Sciences
• /
• v.47 no.4
• /
• pp.320-329
• /
• 2021

Background: Smoking exposure may be objectively assessed through specific biomarkers. The most common biomarker for smoking is cotinine concentration in urine, and setting an optimal cut-off point can accurately classify smoking status. Such a cut-off point for Korean adolescents has never been studied. Objectives: The aim of this study was to determine a cut-off point for urinary cotinine concentration for the discrimination of smoking in adolescents. Methods: Participants were adolescents aged 13~18 years who participated in the third cycle of the Korean National Environmental Health Survey. We used urine samples to confirm the level of cotinine concentrations. Smoking status was determined by self-reported questionnaire. We identified the optimal cotinine cut-off point for discriminating smoking status using receiver operating characteristic curve analysis. Results: Of the 904 participants, 28 (3.1%) were smokers, among whom 20 (71.4%) were male. The median urinary cotinine concentrations in smokers was 218 ㎍/L (male: 215 ㎍/L, female: 303 ㎍/L), and that in non-smokers was 1.31 ㎍/L (male: 1.46 ㎍/L, female: 1.18 ㎍/L). We found significant differences in urinary cotinine concentration according to smoking status and sex (p<0.001). Urinary cotinine concentrations performed well for identifying smoking adolescents [area under the curve: 0.954 (male: 0.963, female: 0.908)]. The cut-off that optimally distinguished smokers from non-smokers was 39.85 ㎍/L (sensitivity: 89.3%, specificity: 97.4%). Male [39.85 ㎍/L (sensitivity: 90.0%, specificity: 94.9%)] had a different optimal cut-off point than female [26.26 ㎍/L (sensitivity: 87.5%, specificity: 99.6%)]. Conclusions: This study determined a cut-off point for urinary cotinine of 39.85 ㎍/L (male: 39.85 ㎍/L, female: 26.26 ㎍/L) to distinguish smokers from non-smokers in adolescents.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.124-127
• /
• 2002

LC aligning capabilities and the variation of pretilt angles with ion beam irradiation on the a-C:H thin films, and electro-optical (EO) performances of the ion beam aligned twisted nematic (TN)-liquid crystal display (LCD) with oblique ion beam exposure on the a-C:H thin film were studied. A high pretilt angle of $3.5{^{\circ}}$ via ion beam irradiation on the a-C:H thin film was measured. Also, the LC pretilt angle decreased due to the increase in surface roughness at over 2 min of IB exposure time. It is considered that this roughness increase due to increasing IB exposure time that generated destroy of oriented rings of atoms related to LC alignment. An excellent voltage-transmittance (V-T) curve of the ion beam aligned TN-LCD was observed with oblique ion beam exposure on the a-C:H thin film for 1 min. Also, a faster response time for the ion beam aligned TN-LCD with oblique ion beam exposure on the a-C:H thin film for 1 min can be achieved. Finally, the residual DC property of the ion beam aligned TN-LCD with ion beam exposure of 1 min on the a-C:H thin film is almost same as that of the rubbing aligned TN-LCD on a PI surface.

• The Korean Journal of Nuclear Medicine
• /
• v.21 no.2
• /
• pp.183-190
• /
• 1987

In Raynaud's phenomenon, the authors measured finger blood flow after ice water exposure by analyzing the time activity curve of radionuclide angiography on both hands. The results were as follows: 1) The digital blood flow did not decrease after ice water exposure in normal subjects. 2) In the patients with Raynaud's phenomenon, there were two groups: the one had decreased digital blood flow after cold exposure, and the other had paradoxically increased digital blood flow after cold exposure. 3) There was no difference in the digital blood flow of hand in room temperature between the normal and the patients with reduced digital blood flow after cold exposure, but the digital blood flow of the hand in room temperature was markedly reduced in the patients with paradoxically increased flow after cold exposure. 4) In the static image the difference was not significant in comparision with the dynamic study, because it represents pooling of the blood in the vein rather than flow. 5) After the treatment with nifedipine, the digital blood flow increased. In conclusion, the radionuclide angiography was useful in measuring the digital blood flow in Raynaud's phenomenon, and further studies with various drugs is expected.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.2
• /
• pp.124-129
• /
• 1988

Prolonged aquatic toxicity tests (7-days) of six pesticides to the freshwater fish Oryzias latipes were performed to confirm the adequacy of the exposure times, 48-hr or 96-hr, which has been required by the protocols for the aquatic acute toxicity test. The toxicity curves were plotted for each chemical, and the significance of the difference between lethal threshold concentrations and 48-hr or 96-hr LC50's was analysed statistically. The lethal threshold concentrations of butachlor, fenobucarb, and chlorothalonil were clearly defined on the 5th day, 2nd day, and 2nd day at 0.53mg/1, 10.3mg/l, and 0.085mg/1, respectively. But the toxicity curves of alachlor, diazinon, and iprobenfos continued with no threshold for 7 days. Four out of six test pesticides failed to show the threshold concentration during the 96-hr exposure time. Therefore, the results of the acute toxicity test using 48-hr or 96-hr exposure time would not describe the ideal toxicity of pesticides. It is recommended that the prolonged exposure should be continued long enough to define the threshold adequately.

• Computers and Concrete
• /
• v.19 no.6
• /
• pp.609-615
• /
• 2017

In this paper, the effects of elevated temperatures on the strength and compressive stress-strain curve (SSC) of recycled coarse aggregate concrete with different replacement percentages are presented. 90 recycled coarse aggregate concrete prisms are heated up to 20, 200, 400, 600, $800^{\circ}C$. The results show that the compressive strength, split tensile strength, elastic modulus of recycled aggregate concrete specimens decline significantly as the temperature rise. While the peak strain increase of recycled aggregate concrete specimens as the temperature rise. Compared to the experimental curves, the proposed stress-strain relations for recycled aggregate concrete after exposure elevated temperatures can be used in practical engineering applications.

• Structural Engineering and Mechanics
• /
• v.66 no.4
• /
• pp.477-485
• /
• 2018

This study aims to investigate the influence of individual and hybrid fiber on the local bond-slip behavior of medium and high strength concrete after exposure to different high temperatures. Tests were conducted on local pullout specimens (150 mm cubes) with a reinforcing bar embedded in the center section. The embedment lengths in the pullout specimens were three times the bar diameter. The parameters investigated include concrete type (control group: ordinary concrete; experimental group: fiber concrete), concrete strength, fiber type and targeted temperature. The test results showed that the ultimate bond stress in the local bond stress versus slip curve of the high strength fiber reinforced concrete was higher than that of the medium strength fiber reinforced concrete. In addition, the use of hybrid combinations of steel fiber and polypropylene fiber can enhance the residual bond strength ratio of high strength concrete.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.369-372
• /
• 2001

We studied the electro-optical (EO) performance in the vertical-alignment (VA) - l/4$\pi$ cell photoaligned with polarized UV exposure on a homeotropic photopolymer surfaces. Excellent voltage-transmittance curve in the VA - l/4$\pi$ cell photoaligned with polarized UV exposure for 3 min on the photopolymer containing cholesterol group of 8% can be achieved. The V-T characteristics in the VA-l/4$\pi$ cell photoaligned on the photopolymer surface can be improved by increasing cholesteryl group. For response time measurement, the transmittance characteristics of the VA-l/4$\pi$ cell photoaligned on the photopolymer surface was better than that of the VA-l/4$\pi$ cell rubbingaligned on a polyimide(Pl) surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.731-735
• /
• 2002

Electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure on the poly［4- (fluorocinnamate) phenylmaleimide](PFCPMI) surfaces using a new photodimerization method were investigated. For a new UVLPH (UV linearly polarized during heating) photodimerization method, the photopolymer layers were exposed by linearly polarized UV dichroic polarizer without a specific UV filter during heating at $150^{\circ}C$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN-LCD with UV exposure on the PFCPMI surface for 10 min using the UVLPH photodimerization method was observed. For response time measurement, the transmittance characteristics of the photoaligned TN-LCD using the UVLPH photodimerization method on the photopolymer surface was better than that of the photoaligned TN-LCD using the UVLP photodimerization method under a room temperature.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.131-133
• /
• 2014

Vibration exposure of the KTX and ITX-saemaeulho on the Gyung-Bu line was evaluated and compared in terms of human health based on ISO 2631. RMS value of KTX was calculated as much lower than ITX-saemaeulho in all travel sections. When VDV result of the two trains drived return travel from Seoul to Busan in single day is compared on the health guidance caution zone of ISO 2631, vibration exposure of KTX is safer than ITX-saemaeulho which is marginally under the caution line.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.670-674
• /
• 2001

The electro-optical (EO) performance in the vertical-alignment (VA) - 1/4$\pi$ cell photoaligned with polarized UV exposure on a homeotropic photopolymer surfaces was investigated. Excellent voltage-transmittance curve in the VA - 1/4$\pi$ cell photoaligned with polarized UV exposure for 3 min on the photopolymer containing cholesteryl group of 8% can be achieved. The V-T characteristics in the VA-1/4$\pi$ cell photoaligned on the photopolymer surface can be improved by increasing cholesteryl group. For response time measurement, the transmittance characteristics of the VA-1/4$\pi$ cell photopolymer surface was better than that of the VA-1/4$\pi$ cell rubbingaligned on a polyimide(PI) surface.