• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.489-492
• /
• 2014

본 논문에서는 컴퓨터 단층활영(CT)을 통해 발생되는 방사선 노출량의 관리를 위한 시스템의 소프트웨어 설계를 제안한다. 방사선 피폭량은 환자의 각 신체 부위별로 민감성의 차이에 따라 다르기 때문에 방사선의 노출량을 관리할 수 있게 되면 결과적으로 환자의 방사선 피폭량을 추정할 수 있다. 최근 일본 원전의 방사선 누출 사건이 국제적으로 뉴스가 되었고 원전 뿐 만아니라 의료용 방사선 피폭까지 폭넓게 관심이 커지고 있다. 현재 방사선 안전관리는 방사선 관계 종사자에 대해서만 관리되고 있지만, 이제는 환자에 대한 피폭 관리까지 요구되고 있다. 우리나라에서 방사선을 이용한 검사와 시술이 증가하여 이에 따른 의료 피폭이 증가하였으나 의료 기관에서는 환자에게 가해지는 방사선 피폭 수치를 알지 못하는 실정이다. 따라서 의료 기관에서 환자의 방사선 피폭을 관리할 수 있는 시스템이 필요하다. 본 논문에서는 의료 기관에서 방사선을 이용하는 대표적인 촬영 도구인 CT의 방사선 노출량을 관리할 수 있는 소프트웨어 설계를 제시한다. 방사선의 노출량을 확인하고 선량의 한도를 설정함으로써 환자의 의료 피폭량을 최적화 하는데 도움이 되고자 한다.

• Journal of Astronomy and Space Sciences
• /
• 제24권4호
• /
• pp.431-450
• /
• 2007

천체의 장시간 노출을 위한 망원경 자동추적장치는 CCD 카메라의 성상 관측결과를 피드백하여 제어한다. 그러나 대기 시상효과에 의해 성상 관측의 정확도가 변하면 제어의 정확도도 달라진다. 본 연구에서는 제어공학에서 사용하는 이산시간 동적 이론을 적용하여 자동추적장치의 효율을 극대화 할 수 있는 이론을 개발하였다. 망원경의 추적장치에 기계적인 오차가 있는 경우, CCD 카메라의 성상 관측결과에 나타나는 대기시상 효과를 구체적으로 모델링한 후, 제안된 성능지표에 주는 영향을 수식적으로 유도하고 분석하였다. 그리고 기계적인 오차와 대기시상 값의 이론적인 상관관계를 실제 관측 실험을 수행하여 검증하였다.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1823-1831
• /
• 2010

This paper proposes an automatic tracking control algorithm for efficiency improvement of photovoltaic generation. Increasing the power of PV systems should improve the efficiency of solar cells or the power condition system. The normal alignment of the PV module always have to run perpendicular to the sun's rays. The solar tracking system, able to improve the efficiency of the PV system, was initiated by applying that to the PV power plant. The tracking system of conventional PV power plant has been studied with regard to the tracking accuracy of the solar cells. Power generation efficiency were increased by aligning the cells for maximum exposure to the sun's rays. Using a perpendicular position facilitated optimum condition. However, there is a problem about the reliability of tracking systems unable to not track the sun correctly during environmental variations. Therefore, a novel control algorithm needs to improve the generation efficiency of the PV systems and reduce the loss of generation. This control algorithm is the proposed automatic tracking algorithm in this paper. Automatic tracking control is combined the sensor and program method for robust control in environment changing condition. This tracking system includes the insolation, rain sensor and anemometer for climate environment changing. Proposed algorithm in this paper, is compared to performance of conventional tracking control algorithm in variative insolation condition. And prove the validity of proposed algorithm through the experimental data.

• 한국입자에어로졸학회지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2016

In this work, we evaluated the characteristics of flow field and uniformity of the nose-only exposure chambers for the inhalation toxicity test. Computational fluid dynamics (CFD) modeling was carried out to demonstrate uniformity of the nose-only exposure chambers. Because it is very important in the inhalation toxicity experiments that test materials are distributed uniformly to each holder of the chamber. The test was done with these 3 types of chamber with different form to develop inhalation toxicity evaluation system, easy-to-operate system among exposure chamber used for evaluating inhalation toxicity of environmental chemical mixtures. Through CFD interpretation, nose-only exposure chamber was made with the selection of the optimal conditions. For its evaluation, one type of fragrance was selected and measured particle size distribution of each port. The gene becoming luminous to green fluorescence was combined with GPT-SPE, a type of tGFP vector, to be inhaled to the mouse. Based on this, luminous intensity was checked. As a result, total particle number concentration of each port had average value of $3.17{\times}10^6{\sharp}/cm^3$ and range of the highest and lowest concentration value was approximately ${\pm}4.8%$. Autopsy of lung tissues of mouse showed that it had clearly better delivery of gene compared to the control group.

• Safety and Health at Work
• /
• 제10권3호
• /
• pp.355-361
• /
• 2019

Background: Painters in the automotive sector are routinely exposed to volatile organic solvents, and the levels vary depending on the occupational health and safety controls enforced at the companies. This study investigates the levels of exposure to organic vapors and the existence of controls in the formal economy sector in southern Colombia. Methods: This is an exploratory study of an observational and descriptive character. An analysis of solvents is conducted via the personal sampling of painters and the analysis of samples using the National Institute for Occupational Safety and Health 1501 method. The amount of solvents analyzed varied according to the budget allocated by the companies. The person in charge of the occupational safety and health management system was interviewed to learn about the exposure controls implemented at the companies. Results: A medium exposure risk for toluene was found in one company. Another presented medium risk for carbon tetrachloride, xylene, ethylbenzene, and n-butanol. The others showed low risk of exposure and that the controls implemented were not sufficient or efficient. Conclusion: These results shed light on the working conditions of these tradespeople. The permissible limits established by Colombian regulations for the evaluated chemical contaminants were not exceeded. However, there were contaminants that exceeded the limits of action. The analysis of findings made it possible to propose improvements in occupational safety and health management systems to allow the optimization of working conditions for painters, prevent the occurrence of occupational diseases, and reduce costs to the country's health system.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.403-406
• /
• 2006

A new medical X-ray PIV technique was developed using a conventional medical X-ray tube. To acquire images of micro-scale particles, the X-ray PIV system consists of an x-ray CCD camera with high spatial resolution, and a X-ray tube with small a focal spot. A new X-ray exposure control device was developed using a rotating disc shutter to make double pulses which are essential for PIV application. Synchronization methodology was also developed to apply the PIV technique to a conventional medical X-ray tube. In order to check the performance and usefulness of the developed X-ray PIV technique, it was applied to a glycerin flow in an opaque silicon tube. Tungsten particles which have high X-ray absorption coefficient were used as tracer particles. Through this preliminary test, the spatial resolution was found to be higher than ultrafast MRI techniques, and the temporal resolution was higher than conventional X-ray PIV techniques. By improving its performance further and developing more suitable tracers, this medical X-ray PIV technique will have strong potential in the fields of medical imaging or nondestructive inspection as well as diagnosis of practical thermo-fluid flows.

• 한국산업보건학회지
• /
• 제28권2호
• /
• pp.230-239
• /
• 2018

Objective: The purpose of this study is to identify the kinds and exposure levels of health hazards in the metalworking process in relation to acute poisoning accidents caused by methanol in 2016. Methods: The number of industries, workplaces, exposed workers, regional distribution, and exposure level of health hazards in metalworking process were investigated based on employee exposure assessment database provided by KOSHA (the Korea Occupational Safety and Health Agency), which was collected from workplace hazard evaluation programs in Korea. Exposure metrics for methanol were assessed by RCR (risk characterization ratio). Results: The numbers of processes, workplaces, and exposed workers of metalworking, which include CNC (computer numerical control) were 25, 14,405, and 169,102 respectively. The numbers of samples of chemical hazards including methanol were 91,325, and it was found that workers in metalworking were exposed to 249 kinds of chemical hazards. There were 16 kinds of special controlled substances including beryllium. It is estimated that the number of workplaces involving CNC process was 2,537, and the number of exposed workers was 27,976. In CNC process, the total number of workplaces handling methanol was 36, and 298 workers were estimated to be exposed. There was no exceeded that surpassed the OEL and 49% of samples were below the limit of detection. Methanol exposure concentrations in Gyeonggido Province were statistically significantly higher than in other areas (p <0.0001). Conclusions: In the metalworking process including CNC, there is exposure to a wide variety of health hazards. There was no sample exceeding the OEL for methanol. Therefore, it is necessary to recognize the limits of the employee exposure assessment system and urgently improve measures to prevent the occurrence of events like methanol poisoning.

• 대한임상독성학회지
• /
• 제2권1호
• /
• pp.1-6
• /
• 2004

Purpose: A number of reports about the intoxicated patients have been introduced, but there were few multicenter studies. The purpose of this study was to analyse the patients with toxic exposure in the Daejon province. Methods: The patients who were presented to the four academic emergency departments in Daejon with toxic exposure were enrolled from January to June 2003. The collected variables were according to the form which modified from the Toxic Exposure Surveillance System (TESS) of the American Association of Poison Control Centers. Results: The toxic exposure patients were 362 cases which is $0.78\%$ of total patients presented to the emergency department. The most common exposure site was home ($84\%$). Eighteen percent of cases were exposed by two or more substances. The most common substance was the pesticides ($34.8\%$), and the non-prescription drugs ($32.6\%$) was followed. The suicidal attempt was the top reason for exposure ($67.1\%$). The route of exposure other than ingestion was $3.6\%$. Although the most patients left the hospital within a day, the average treatment period was 4.4 days. Thirty-one patients ($8.6\%$) were expired, and 22 among them were exposed to the paraquat. Conclusion: We reported the current status of toxic exposure in Daejon province by modified TESS style.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.314-316
• /
• 1994

The operation of RC(Rod Consolidation) technology carry out highly radiation environment. It requires remote operation and automation for efficient handling and for minimizing radiation exposure to the operator. So we investigated up and down position control of shock absorber device in RC system. To verify the research experimentally, a RC system was set up and PI control method was applied. Fuzzy control method was also tested to further improve control behavior.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.426-431
• /
• 2008

In this paper, an improved AE system for digital still camera is proposed. AE system is auto exposure system to maintain optimized brightness of output image. But there is limitation for mobile devices to get high quality image with the conventional AE algorithm, because of organizational restriction of system. The conventional research has been studied only electronic shutter and AGC on the AE algorithm. In this paper, we suggest new AE algorithm included target setting, frame delay, Gamma Correction as well as electronic shutter and AGC to get high quality image. The proposed algorithm show improved result at control speed and ability of luminance expression.