• Journal of The Geomorphological Association of Korea
• /
• v.28 no.2
• /
• pp.59-70
• /
• 2021

This study aims to determine the sunlight exposure according to depositional environment to improve the accuracy of optically simulated luminescence (OSL) dating. Sufficient sunlight exposure during transportation of sediment is a basic assumption of the OSL dating, and if the process does not occur enough, the results may be overestimated compared to the actual depositional age. Therefore, the main purpose of this study is to establish a correction method by determining residual or unbleachable dose after sunlight exposure in the actual deposition process, not in the laboratory measurement. Four samples from two sites were collected according to the depositional environment from rivers and coasts, and various OSL signals, including the size of residual dose, degree of dispersion between grains, and OSL signal sensitivity, were measured. As a result, it was confirmed that sediments formed under temporarily high energy environments, such as floods and surges, had relatively high residual dose or large dispersion of residual dose between particles. In further studies, the OSL signal characteristics of river sediments by flow velocity will be identified and the relationship between energy and OSL signal characteristics will be identified in more detail. Moreover, a method of reconstructing the paleo-environment at the time of deposition for existing sediments will be devised. It is expected to provide important information for the frequency of disaster recurrence and prediction of future climate change.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.1 no.1
• /
• pp.91-107
• /
• 1999

The primary purpose of this study is to inquire into the characteristic of exposure presented in fashion, identify the correct concept of exposure from an aesthetic perspective, and grasp the contemporary meaning of exposure presented in fashion. As a result of study, the following findings were obtained: First, the surrealist style of fashion exhibited representations such as the relocation of the partial details, the harmonization of the natural and the artificial, the emphasis or expansion of each part of the body, and the like. It used highlighted the genital region with ornamentations or used the technique of paradoxically exposing the part of the body always covered. And it exbibited the paradoxical relationship of exposure and concealment by exposing the concealed part of the human body. Second, the post-modern style showed the complicated phenomenon that the values of several meanings such as the historic, the folk, and the like appeared in its fashion. It shares in spatiotemporal eclecticism, pluralistic characteristics and the like found in the post-modern culture. Third, the deconstructive style gets rid of the distinction between the external space and the private space by translating underwears into outer garments. It destroys clothing by tearing or perforating clothing whereby it represents the poor image. Coupled with women‘s psychology of exposure and the new generation’s way of thinking indifferent to others‘ eyes, this fashion of deconstruction occupies the great current of fashion. Deconstructive fashion gets away with the rule of ‘having to wear clothing to suit TPO(Time, Place and Occasion), the traditional norm of wearing clothing.

• Reproductive and Developmental Biology
• /
• v.35 no.3
• /
• pp.257-263
• /
• 2011

In general, the blood cell culture is a common method for animal chromosome preparation. However, every animal and its cells have unique physiological characteristics and functions. Hence, it is very difficult to find the suitable method of chromosome preparation using animal lymphocyte culture. This study was carried out to fine the suitable method of chromosome preparation using lymphocytes cultures in mammalians and aves including cattle, rat, mouse and chicken. To seek the optimal method of lymphocyte culture in each animal, $2^3$ factorial experiment was designed. The design evaluated three main effects in culture duration, kinds of mitogen supplements and colcemid exposure time with two levels within each effect. The mitotic index and the score of chromosome morphology were analyzed. In results, the suitable methods of lymphocyte culture for chromosome preparation were 72 hours culture, pokeweed mitogen(PWM) supplement and 90 minutes of colcemid exposure in cattle, 72 hours culture, PWM supplement and 50 minutes of colcemid exposure in chicken, 96 hours culture, concanavalin A supplement and 90 minutes of colcemid exposure in rat, and 72 hours culture, PWM supplement and 50 minutes of colcemid exposure in mouse, respectively. In conclusion, kinds of mitogen, culture duration and colcemid exposure time significantly affected the mitotic index and chromosome morphology, in animal lymphocyte culture. The interaction effects between/among treatment factors were also statistically significant.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.135-141
• /
• 2012

This study was conducted to evaluate the characteristics of exposure to asbestos for ship repair workers in Korea by a systematic review. The number of articles studying asbestos exposure levels from ship repair workplaces was found to be 4. All asbestos concentration reported as either geometric mean and geometric standard deviation or ranges were transformed to arithmetic mean to estimate exposure level. In addition, weighted arithmetic means(WAMs) were calculated by weighing of the different number of samples. The WAM concentrations were 2.746 f/cc during asbestos dismantling work, 0.034 f/cc before asbestos dismantling work and 0.065 f/cc after working respectively. The maximum airborne concentration of asbestos during asbestos removal work was 7.02 f/cc which was 70 times higher than the occupational exposure limit of Korea, 0.1 f/cc. This study recommends that retrospective exposure to asbestos based on various ship types and operations should be assessed.

• Journal of the Korean Society of Safety
• /
• v.22 no.3 s.81
• /
• pp.13-21
• /
• 2007

Personal and static sampling for formaldehyde, wood dust and noise monitoring, in accordance to the equipment running on the day, were carried out throughout wood panel manufacturing process. Even though the exposure level of formaldehyde and wood dust were below than exposure criteria, but the personal protective equipment(PPE) for those should be worn to everyone in the process because of its potential characteristics like carcinogenicity. Also a few local air extraction system above the cutting, grinding sections and organic blending room should be required. Most of the exposures of noise exposure were exceeded permitted exposure criteria, in case of Hopper operators, exposed to maximally 94dB(A) as LAeq 8hr, therefore active controls like PPE, monitoring, isolation etc. are necessary. The main sources of noise were caused on compressed air of the machinery, radio sound and operation noise like running machines, conveying, cutting, sawing, moving vehicles, storing and so on. For the comparison of control criteria in each country, the permitted exposure standards for above hazardous materials and noise in Korea, ACGIH and Australia were discussed. We have recognized that the Korean criteria should be discussed urgently to give the right information to employee and modified, if it is necessary.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.230-239
• /
• 2018

Objective: The purpose of this study is to identify the kinds and exposure levels of health hazards in the metalworking process in relation to acute poisoning accidents caused by methanol in 2016. Methods: The number of industries, workplaces, exposed workers, regional distribution, and exposure level of health hazards in metalworking process were investigated based on employee exposure assessment database provided by KOSHA (the Korea Occupational Safety and Health Agency), which was collected from workplace hazard evaluation programs in Korea. Exposure metrics for methanol were assessed by RCR (risk characterization ratio). Results: The numbers of processes, workplaces, and exposed workers of metalworking, which include CNC (computer numerical control) were 25, 14,405, and 169,102 respectively. The numbers of samples of chemical hazards including methanol were 91,325, and it was found that workers in metalworking were exposed to 249 kinds of chemical hazards. There were 16 kinds of special controlled substances including beryllium. It is estimated that the number of workplaces involving CNC process was 2,537, and the number of exposed workers was 27,976. In CNC process, the total number of workplaces handling methanol was 36, and 298 workers were estimated to be exposed. There was no exceeded that surpassed the OEL and 49% of samples were below the limit of detection. Methanol exposure concentrations in Gyeonggido Province were statistically significantly higher than in other areas (p <0.0001). Conclusions: In the metalworking process including CNC, there is exposure to a wide variety of health hazards. There was no sample exceeding the OEL for methanol. Therefore, it is necessary to recognize the limits of the employee exposure assessment system and urgently improve measures to prevent the occurrence of events like methanol poisoning.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.135-143
• /
• 2018

Objectives: There have been many studies on exposure assessment of workers at companies using asbestos as a raw material and at sites of the removal of materials containing asbestos. However, no research has been carried out on the asbestos exposure of workers in industries involving asbestos-containing waste, such as workers at collection and transportation service companies, mid-treatment companies(solidification of asbestos-containing waste), and landfill sites. The objective of this study was to assess the asbestos exposure concentrations of workers in industries handling waste containing asbestos. Methods: For this study, we carried out field investigations at 15 companies: seven collection and transportation service companies, three mid-treatment companies, and five final treatment companies(landfill sites). We took both personal and area samples. Results: The range of asbestos exposure levels of workers handing asbestos-containing wastes at collection, mid-treatment, and landfill companies were 0.000 fibers/cc-0.009 fibers/cc, 0.000 fibers/cc-0.038 fibers/cc, and 0.000 fibers/cc-0.024 fibers/cc, respectively. Conclusions: The asbestos exposure levels of workers at mid-treatment companies were higher than those at collection and transportation companies and at final treatment companies. In the case of collection and transportation workers, the possibility of exposure to levels exceeding those found in the present study is not particularly high considering the characteristics of the work. However, in the case of intermediate or final disposal workers, it is considered that there is a possibility of exposure to levels above those found in this study.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.3
• /
• pp.304-311
• /
• 2018

Objectives: The purpose of this study was to compare the self-reported symptoms of occupational asthma, occupational rhinitis, and respiratory symptoms between a direct exposure to flour dust group and a non-exposure group from the bakery industry. Methods: The participants were 62 workers directly exposed to flour dust and 30 non-exposed workers. The survey was composed of questions related to general characteristics. Korean self-reported respiratory symptoms(SNU-93), occupational asthma, and occupational rhinitis data was collected from April to July 2017. Results: The smoking rate among the direct exposure to flour dust workers was 67.7% and the mean of working hours(11-12) was 96.8%. The SNU-93 questionnaire revealed that respiratory symptoms in the chest and wheezing or whistling were significantly higher among the direct-exposure group than non-exposure group. The response for occupational asthma symptoms was significantly higher in the direct exposure group(2.4 points) than in the non-exposure group(1.6 points). Conclusion: In order to decrease the symptoms of these respiratory diseases among bakery workers exposed to flour dust, it is necessary to reduce working hours and the smoking rate. The performance of periodic medical examinations is needed to find abnormal respiratory diseases. In addition, workers who have been diagnosed with asthma and rhinitis should consider switching to a process that is not exposed to flour dust.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.6 no.2
• /
• pp.117-122
• /
• 2008

Purpose: Surveys on poisoning usually involves intoxication rather than inhalation, skin contact, etc. Therefore, we examined the characteristics of patients who visited the emergency department in an industrial complex after acute industrial exposure to toxic materials. Methods: Medical records of patients exposed to toxic materials in the work places from April, 2006, to March, 2008, were analyzed retrospectively. Inhalation patients due to fire were excluded. Results: Subjects included 66 patients, with a mean age of $35.4{\pm}10.9$ years, mostly men (91%). Toxicity occurred in 51 patients (77%) by contact, 15 patients (23%) by inhalation, and none by oral ingestion. For toxic materials, 10 patients were exposed to hydrofluoric acid, 8 to hydrochloric acid, 7 to sodium hydroxide, 7 to metals, and others. The face and hands were the most frequent exposure site by contact. Most exposures were caused by accidents, with 29 cases (42%) exposed because of carelessness or not wearing protective equipment. Most complaints were pain on exposure site, but 7 of the inhalation patients complained of dyspnea. The majority of patients with contact exposure were discharged after wound care or observation. After inhalation exposure, 1 patient died and 5 patients were admitted to the intensive care unit. Conclusion: Major causes of workplace exposure were not wearing protective equipment or carelessness. Although contact exposures are usually benign, cautious observation and management are required in patients with inhalation exposure.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.6
• /
• pp.575-582
• /
• 2016

Seoul city has high population density as well as high traffic congestion, which are vulnerable to exposure of environmental pollutions caused by car traffic. However, recent studies are only on local regions about road traffic and air pollution or health effect of road traffic on residents. Thus, comprehensive study data are needed in terms of overall Seoul regions. In this study utilized the nitrogen dioxide concentration through the national air pollution monitoring network data, 2012 to 2013. It also divided regions into high and low exposure districts via the Origin destination data developed by the Korea transport institute to quantify and evaluate the effect of transport policies and analyzed a correlation of asthma symptoms with high and low exposure districts through raw data of community health survey from the Korea centers for disease control and prevention. Based on the collected data, the pearson's correlation analysis was conducted between air pollution substance concentration and high exposure district and multiple logistic regression analysis was conducted to determine the effect of traffic environment and factors on asthma symptoms of residents. Accordingly, the following results were derived. First, the high exposure district was higher concentrations of nitrogen dioxide ($NO_2$) as per time compared to those of the low exposure district (p<0.01). Second, analysis on correlation between average daily environmental concentration in the air pollution monitoring network and road traffic showed that nitrogen dioxide had a significant positive correlation (p<0.01) with car traffic and total traffic as well as with truck traffic (p<0.05) statistically. Third, an adjusted odds ratio about asthma doctor's diagnosis in the high and low exposure districts was analyzed through the logistic regression analysis. With regard to an adjusted model 2 (adjusted gender, age, health behavior characteristics, and demographic characteristics) odds ratio of asthma doctor's diagnosis in the high exposure district was 1.624 (95% CI: 1.269~2.077) compared to that of the low exposure district, which was significant statistically (p<0.001).