• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.220-223
• /
• 2008

A test facility to measure the performance of a KM(Kick Motor) is constructed, and prediction of blast wave propagation over the facility is performed to check if the safety of test personnel in MCC(Main Control Center) can be guaranteed even for the most severe explosion. Assuming that the initial explosion energy is contained in a sphere under the pressure of 500, 1000, 1500 psi, respectively, the radius of the sphere is determined for each pressure to set the mass of contained explosion gas to 35 kg. The material properties of explosion gas are set to be the ones of KM propellant combustion gas under normal condition. To reduce the effort and time required for a complex three-dimensional modeling, the flowfield is approximated to axismmetry. Calculations are performed for all three initial pressure conditions, and the analysis of the result is given for 1500 psi which is expected to be the worst case. The maximum pressure is 3.5 psig while the minimum pressure is -1.2 psig on the outer wall of MCC, and the maximum pressure difference between the inner and outer walls of protection wall amounts to 3.0 psi.

• 화약ㆍ발파
• /
• 제41권3호
• /
• pp.1-12
• /
• 2023

근접 폭발로 인해 발생하는 폭발 충격파의 위험을 완화하기 위한 기술에 대한 기초 평가를 수행하였다. 기존의 일반적인 기술로는 폭발물 주변이나 충격파의 진행 방향에 방호물질을 사용하여 차단막을 형성하는 방법이 사용되었다. 다양한 폭발 에너지 분산 메커니즘이 제안되었으며, 임피던스 차이를 활용한 폭발 충격파 완화에 대한 연구가 많은 관심을 받고 있다. 본 연구에서는 전단농화유체(STF)를 충격완화물질로 적용하여 폭발 충격파 완화에 대한 폭발실험 및 수치해석을 통해 STF 완화물질의 효과를 평가하였다. 그 결과로써 STF 완화물질의 폭발 충격압 감쇄성능의 실효성을 확인할 수 있었다.

• 한국분무공학회지
• /
• 제10권3호
• /
• pp.9-16
• /
• 2005

To investigate spray and combustion of emulsified fuel of W/O type, we mixed water with light oil by using ultrasonic energy adding system. We measured the SMD of sprayed droplet to find atomization characteristics of emulsified fuel with using the Malvern 2600D system. Major parameters are the weight ratio of water($0{\sim}30%$ by 10%) in emulsified fuel injection pressure(lobar), and the measurement distance($10{\sim}100mm$ by 10mm). Combustion visualizing system is made up commonly used boiler system and digital camera 1/500s to investigate combustion phenomena. As a result, the more water contents increased, the more SMD increased. The water particle of emulsified fuel made short flame in continuos spray combustion phenomena because of micro explosion.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2003년도 international symposium on advanced powder metallurgy
• /
• pp.27-32
• /
• 2003

The phenomenon of electrical explosion of conductors is considered in the context of the changes in the energy and structural states of the metal at the stages of energy delivery and relaxation of the primary products of EEC. It is shown that these changes are related to the forced interaction of an intense energy flux with matter and to the subsequent spontaneous relaxation processes. The characteristics of nano-sized metal powders are also discussed.

• Nuclear Engineering and Technology
• /
• 제17권1호
• /
• pp.53-67
• /
• 1985

중대 노심사고는 아직 Design Basis Accident에 포함되지 않고 있으나, 극히 적은 사고 확률을 가지는 반면 사고 후 영향이 큼으로해서 원자력발전소의 전반적 위험 평가에 중요한 요인중의 하나가 되고 있다. 중대 노심사고시 격납용기 손상에 관련된 물리현상들은 Steam Explosion, Debris Bed Coolability, Hydrogen Burning, Steam Spike와 Core-Concrete Interaction 등이며, 각각의 현상에 대한 좀 더 나은 이해를 위해 현재 이루어지고 있는 연구들에 대한 개략적 설명을 시도 하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.525-530
• /
• 2008

We present a model for simulating high energy laser heating and ignition of confined energetic materials. The model considers effect of ablation of steel plate with long laser pulses and continuous lasers of several kilowatts and the thermal response of well-characterized high explosives for ignition. Since there is enough time for the thermal wave to propagate into the target and to create a region of hot spot in the high explosives, electron thermal diffusion of ultra-short(femto- and pico-second) lasing is ignored; instead, heat diffusion of absorbed laser energy in the solid target is modeled with thermal decomposition kinetic models of high explosives are used. Numerically simulated pulsed-laser heating of solid target and thermal explosion of cyclotrimethylenetrinitramine(RDX), triaminotrinitrobenzene(TATB), and octahydrotetranitrotetrazine(HMX) are compared to experimental results. The experimental and numerical results are in good agreement.

• 터널과지하공간
• /
• 제31권1호
• /
• pp.52-65
• /
• 2021

본 연구에서는 멕시코시티 외곽에 있는 프로판 저장기지인 PEMIX 터미널에서 발생한 프로판 누출에 따른 증기운 폭발을 분석하였다. 누출된 4750 kg의 프로판에 대한 TNT 등가량은 9398 kg으로 평가되었다. 폭원으로부터 40~400 (m) 떨어진 지점에서의 최대과압, 양의 압력 지속시간, 충격량과 같은 폭발변수를 TNT 등가법과 다중에너지법을 적용하여 구하였다. 폭발 변수들을 이용하여 구한 프로빗 함수를 적용하여 폐 손상, 고막 파열, 머리 충격, 전신 전위 충격으로 인한 손상 확률을 평가하였다. 고려한 모든 거리에서 다중에너지법을 이용하여 구한 최대과압이 TNT 등가법을 적용하여 구한 최대과압보다 큰 것으로 나타났으나, 200 m 이후 지점부터는 큰 차이가 없는 것으로 평가되었다. 다중에너지법에 의해 구해진 최대과압을 적용하여 구조물 손상 범위를 평가한 결과 폭원으로부터 100 m 이내에 있는 구조물의 경우 완전히 붕괴될 것으로 예측되고, 400 m 떨어진 구조물의 유리창도 거의 파손될 것으로 추정되었다. 폐 손상에 의한 사망 확률은 충격파 진행방향으로 위치하고 있는 인체의 자세에 따라 달라지는 것으로 나타났으며, 인체 주변에 반사면이 있는 경우 사망 확률이 가장 큰 것으로 평가되었다. 충격파가 폐 손상, 고막 파열, 머리 충격, 전신 전위 충격에 미치는 영향을 평가한 결과 전신 전위 충격 < 폐 손상 < 고막파열 < 머리 충격 순으로 영향을 미치는 것으로 나타났다.

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.447-453
• /
• 2014

Effect of oxygen content in the ultrafine tungsten powder fabricated by electrical explosion of wire method on the behvior of spark plasma sintering was investigated. The initial oxygen content of 6.5 wt% of as-fabricated tungsten powder was reduced to 2.3 and 0.7 wt% for the powders which were reduction-treated at $400^{\circ}C$ for 2 hour and at $500^{\circ}C$ for 1h in hydrogen atmosphere, respectively. The reduction-treated tungsten powders were spark-plasma sintered at $1200-1600^{\circ}C$ for 100-3600 sec. with applied pressure of 50 MPa under vacuum of 0.133 Pa. Maximun sindered density of 97% relative density was obtained under the condition of $1600^{\circ}C$ for 1h from the tungsten powder with 0.7 wt% oxygen. Sintering activation energy of $95.85kJ/mol^{-1}$ was obtained, which is remarkably smaller than the reported ones of $380{\sim}460kJ/mol^{-1}$ for pressureless sintering of micron-scale tungsten powders.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2259-2264
• /
• 2009

A new high-energy organic potassium salt, 2-(dinitromethylene)-1,3-diazepentane potassium salt K(DNDZ), was synthesized by reacting of 2-(dinitromethylene)-1,3-diazepentane (DNDZ) and potassium hydroxide. The thermal behavior and non-isothermal decomposition kinetics of K(DNDZ) were studied with DSC, TG/DTG methods. The kinetic equation is $\frac{d{\alpha}}{dT}$ = $\frac{10^{13.92}}{\beta}$3(1 - $\alpha$[-ln(1 - $\alpha$)]$^{\frac{2}{3}}$ exp(-1.52 ${\times}\;10^5$ / RT). The critical temperature of thermal explosion of K(DNDZ) is $208.63\;{^{\circ}C}$. The specific heat capacity of K(DNDZ) was determined with a micro-DSC method, and the molar heat capacity is 224.63 J $mol^{-1}\;K^{-1}$ at 298.15 K. Adiabatic time-to-explosion of K(DNDZ) obtained is 157.96 s.

• 한국가스학회지
• /
• 제4권3호
• /
• pp.33-38
• /
• 2000

When fire and explosion accidents have occurred due to a leak of the flammable gas involving the LNG & LPG in an industrialized society, it is a very important problem. Accordingly, in this paper, we have compared and analyzed the occurrence transition and the electrostatic energy according to dust supplies and pressure variations for the electric charge due to the gas-solids of pipe flow. As the experimental results, if dust amounts and the initial pressure increased, electric charge in the pipe and the exit increased. The Specific charge of $Fe_2O_3$ increased proportionally if the initial pressure increased but if the quantity of dust increased, the specific charge decreased. Energy increased significantly as the dust amounts and the initial pressure increased. The possibility of fire and explosion exist in the measuring point(M 1) and the Faraday cage if natural gas and LPG were used.