• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.61.1-61.1
• /
• 2015

We performed a monitoring campaign of a Jupiter-Family comet 17P/Holmes, which underwent the dramatic outburst on 23.3 October 2007 at $r_h=2.44AU$, to investigate the secular change in activity and subsequent physical properties of the inner dust coma before and after the 2014 perihelion passage. The monitoring observation was carried out over two years: from May to July 2013, from July to November 2014, and January 2015 with ~weekly cadence. We conducted photometry monitoring in Rc band using four ground-based telescopes, which are the Ishigakijima Astronomical Observatory 105cm telescope, the Okayama Astrophysical Observatory 50cm telescope, the Nishi-Harima Astronomical Observatory 2m telescope, and the T30 51cm i-telescope, respectively. In order to examine the dust production rate, we put a constraint upon the physical distance from the center of the nucleus as rho=2500km and conducted aperture photometry. We found that the average absolute Rc magnitude over the period between July to November 2014 was mR(1,1,0)~12.29, which was approximately 1.5 magnitudes fainter than those of 2013 data. Accordingly, comet 17P/Holmes seemed to become dormant, although a minor eruption was detected on January 26, 2015. In this presentation, we will introduce our ongoing project for 17P/Holmes and discuss why the nucleus becomes dormant within one orbital period.

• Parasites, Hosts and Diseases
• /
• v.60 no.2
• /
• pp.117-126
• /
• 2022

Cystatin, a cysteine protease inhibitor found in many parasites, plays important roles in immune evasion. This study analyzed the molecular characteristics of a cystatin from Fasciola hepatica (FhCystatin) and expressed recombinant FhCystatin (rFhcystatin) to investigate the immune modulatory effects on lipopolysaccharide-induced proliferation, migration, cytokine secretion, nitric oxide (NO) production, and apoptosis in mouse macrophages. The FhCystatin gene encoded 116 amino acids and contained a conserved cystatin-like domain. rFhCystatin significantly inhibited the activity of cathepsin B. rFhCystatin bound to the surface of mouse RAW264.7 cells, significantly inhibited cell proliferation and promoted apoptosis. Moreover, rFhCystatin inhibited the expression of cellular nitric oxide, interleukin-6, and tumor necrosis factor-α, and promoted the expression of transforming growth factor-β and interleukin-10. These results showed that FhCystatin played an important role in regulating the activity of mouse macrophages. Our findings provide new insights into mechanisms underlying the immune evasion and contribute to the exploration of potential targets for the development of new drug to control F. hepatica infection.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.3
• /
• pp.316-326
• /
• 2018

Objective: This study investigated the expression of genes in cashmere goats at different periods of their fetal development. Methods: Bioinformatics analysis was used to evaluate data obtained by transcriptome sequencing of fetus skin samples collected from Inner Mongolia cashmere goats on days 45, 55, and 65 of fetal age. Results: We found that FoxN1, FoxE1, and FoxI3 genes of the Fox gene family were probably involved in the growth and development of the follicle and the formation of hair, which is consistent with previous findings. Real-time quantitative polymerase chain reaction detecting system and Western blot analysis were employed to study the relative differentially expressed genes FoxN1, FoxE1, and FoxI3 in the body skin of cashmere goat fetuses and adult individuals. Conclusion: This study provided new fundamental information for further investigation of the genes related to follicle development and exploration of their roles in hair follicle initiation, growth, and development.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.490-490
• /
• 2011

Graphene, hexagonal network of carbon atoms forming a one-atom thick planar sheet, has been emerged as a fascinating material for future nanoelectronics. Huge attention has been captured by its extraordinary electronic properties, such as bipolar conductance, half integer quantum Hall effect at room temperature, ballistic transport over ${\sim}0.4{\mu}m$ length and extremely high carrier mobility at room temperature. Several approaches have been developed to produce graphene, such as micromechanical cleavage of highly ordered pyrolytic graphite using adhesive tape, chemical reduction of exfoliated graphite oxide, epitaxial growth of graphene on SiC and single crystalline metal substrate, and chemical vapor deposition (CVD) synthesis. In particular, direct synthesis of graphene using metal catalytic substrate in CVD process provides a new way to large-scale production of graphene film for realization of graphene-based electronics. In this method, metal catalytic substrates including Ni and Cu have been used for CVD synthesis of graphene. There are two proposed mechanism of graphene synthesis: carbon diffusion and precipitation for graphene synthesized on Ni, and surface adsorption for graphene synthesized on Cu, namely, self-limiting growth mechanism, which can be divided by difference of carbon solubility of the metals. Here we present that large area, uniform, and layer controllable graphene synthesized on Cu catalytic substrate is achieved by acetylene-assisted CVD. The number of graphene layer can be simply controlled by adjusting acetylene injection time, verified by Raman spectroscopy. Structural features and full details of mechanism for the growth of layer controllable graphene on Cu were systematically explored by transmission electron microscopy, atomic force microscopy, and secondary ion mass spectroscopy.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.82-87
• /
• 2017

Recent trends in shipbuilding and offshore industries are a huge increase in the ship size and the exploration and production of oil and natural gas in the arctic offshore region. High performance steel plates are required by these industrial trends. Also in IMO(International Maritime Organization) has begun to regulate of fuel of ship to environmental protection, therefore it is little bit difficult to use bunker-C oil to working ship. As the problem of environmental change such as global warming is emerged, the operation of the ship is considered to be involved in the environmental change problem, and the regulation of environmental pollution is gradually strengthened. As these environmental regulations are strengthened demand for LNG fuel ships is rapidly increasing. Currently, cryogenic steels used in LNG tanks include aluminum alloy, SUS 304, and 9%-Ni steel. Those steels are has high cost to construction of large LNG carrier. The new materials were suggested several steel mills to decrease construction cost and easy construction. The new cryogenic steel should be evaluate safety to applied real structure include LNG ship. Therefore, in this study, fracture toughness of weld joints were investigated with cryogenic steel for application of LNG tank.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.349-357
• /
• 2020

In this paper, I propose a presentation examples of the development of teaching materials using Arduino. For this purpose, a six-step low-cost microcontroller teaching-learning development model was used, the steps being topic selection, exploration of implementation methods, experimentation, production of teaching and learning materials, implementing lesson plans, and improvement. After analyzing the composition of the source code and circuits introduced in the existing Arduino book, this content was reconstructed to fit the programming education context. A simple method of constructing a circuit using materials such as Arduino and a piezo buzzer is proposed to save time on circuit composition. Using this circuit, examples of use in teaching-learning activities for various programming content elements are presented. The core concept of this study is that it provides a direct experience of the content of C language programming exercises that can only be found on existing screens.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.661-670
• /
• 2022

In recent years, extreme rainfall and rainy seasons caused by climate change have caused river flooding and flooding damage, and it is urgent to solve economic and environmental problems in the city center due to the increase in the number of peak homes. The gap block, called the fitting block, is designed to facilitate rainwater pitching by forming a gap between the block and the block by forming a concave part and a protrusion of the block differently without the use of an existing spacer. In this study, for the production of such a gap block, the existing cement content was reduced and aramid fibers and exploration fibers, which are industrial by-products such as Goroslag fine powder and reinforcing fibers, were applied.

• Geomechanics and Engineering
• /
• v.17 no.6
• /
• pp.535-541
• /
• 2019

Combining the radial well drilling and hydraulic fracturing technique, the production capacity of the reservoirs with low-permeability can be improved effectively. Due to the existence of radial holes, the stress around the well is redistributed, and the initiation and propagation of hydraulic fractures are different with those in traditional hydraulic fracturing. Therefore, it is necessary to study the influences of radial horizontal wells on hydraulic fracturing. The laboratory experiment was conducted to simulate the hydraulic fracturing on the physical model with radial holes. The experimental results showed that, compared with the borehole without radial holes, the sample with radial hole in the direction of maximum horizontal stress was fractured with significantly lower pressure. As the angle between direction of the horizontal hole and the maximum horizontal stress increased, the breakdown pressure grew. While when the radial hole was drilled towards the direction of the minimum horizontal stress, the breakdown pressure increased to that needed in the borehole without radial holes. When the angle between the radial hole and the maximum horizontal stress increase, the pressure required to propagate the fractures grew apparently, and the fracture become complex. Meanwhile, the deeper the radial hole drilled, the less the pressure was needed for fracturing.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.399-405
• /
• 1996

The present buried contact (BC) solar cell research at SAIT includes the development of a processing sequence suitable for production of the single sided (SS) BC solar cells. This paper presents some results for large area ($45cm^{2}$) SSBC cells fabricated on FZ and CZ silicon substrates. Cell efficiencies in excess of 18% fabricated on FZ, p-type, 0.5 ohm-cm, and over 16% on CZ p-type, 10~20 ohm-cm, wafers have been demonstrated. Both the FZ and CZ wafers were chemically textured. These results are preliminary and the exploration of double sided (DS) sequence, which is the future BC structure would lead to over 17% and 20% efficiency cells on CZ and FZ substrates respectively. The cost of solar cells can be reduced further if the many high temperature steps can be reduced to only one. This would be very advantageous to very poor quality substrates such as the CZ grown wafers.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.1
• /
• pp.9-14
• /
• 2013

In recent years, high hardness steel is used for most of the material in many areas including aircraft, nuclear power, space exploration and automotive parts. Low CBN tools are widely used in industrial field which can effectively process high hardness steel of HRC 45 or harder. The results of this study demonstrated, when high hardness steel, SCM440 is turned with Low CBN tools coated with TiN and TiAlN coatings respectively, that both the thrust force and cutting force tends to increase with more increase in cutting force than thrust force, as the feed rate increases at constant cutting speed. In addition, the size of the cutting force and thrust force does not change with the increased cutting speed at the same feed rate, but the tool life is reduced if the cutting speed is increased to shorten the machining time. Therefore, it is recommended to limit the cutting speed at 250 m/min maximum or less. Furthermore, comparing the cutting force of the three tools at the same cutting condition, Tin coating tool showed the smallest cutting force and Low CBN was the next, and the TiAlN coating tools showed the largest cutting force.