• Journal of the Korea Society for Simulation
• /
• v.7 no.2
• /
• pp.137-152
• /
• 1998

One of the components that constitute the simulation models is the state variables whose values are determined by the time related simulation process. Embedding rule-based expert systems into the simulation models should provide a systematic way of handling these time-dependent variables without distracting the essential problem solving capabilities of the expert systems which are well suited for expressing the decision making function of complex cases. The expert system, however, is inefficient in dealing with the time elapsing characteristics of target system compare to the simulation models. To solve the problem, this paper provides an interruptible inference engine whose inferencing process can be interrupted when the variables' value, which are used as the parameters of the rules, are not yet determined due to the time dependent nature of the state variables. The process is resumed when the variables are ready. The elapse of time is calculated by time-advance function of the simulation model to which the expert system has been embedded. The example modeling shown exploits the embedded interruptible inferencing capability for the controlling and monitoring of metal grating process.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.20-30
• /
• 2005

In the anaerobe identification, when we develop the clinical decision support system for department of laboratory medicine, we must consider expression of an incomplete knowledge structure and addition of an evolving knowledge based on an expert's informal and heuristic knowledge is very complicated work flow. In the present study, we developed the system for anaerobe identification to advise on identification of unknown bacillus using knowledge base and inference engine. In the future, we are planning to develop the clinical decision support system for the whole bacteria not only an anaerobe but also aerobe to offer an expert's static and dynamic knowledge.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.112-119
• /
• 2017

Selecting suppliers in the global supply chain is the very difficult and complicated decision making problem particularly due to the various types of supply risk in addition to the uncertain performance of the potential suppliers. This paper proposes a multi-phase decision making model for supplier selection under supply risks in global supply chains. In the first phase, the model suggests supplier selection solutions suitable to a given condition of decision making using a rule-based expert system. The expert system consists of a knowledge base of supplier selection solutions and an "if-then" rule-based inference engine. The knowledge base contains information about options and their consistency for seven characteristics of 20 supplier selection solutions chosen from articles published in SCIE journals since 2010. In the second phase, the model computes the potential suppliers' general performance indices using a technique for order preference by similarity to ideal solution (TOPSIS) based on their scores obtained by applying the suggested solutions. In the third phase, the model computes their risk indices using a TOPSIS based on their historical and predicted scores obtained by applying a risk evaluation algorithm. The evaluation algorithm deals with seven types of supply risk that significantly affect supplier's performance and eventually influence buyer's production plan. In the fourth phase, the model selects Pareto optimal suppliers based on their general performance and risk indices. An example demonstrates the implementation of the proposed model. The proposed model provides supply chain managers with a practical tool to effectively select best suppliers while considering supply risks as well as the general performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.373-376
• /
• 2018

Traditional paprika smart farm systems are often harmful to paprika growth because they are set to follow the values of several sensors to the reference value, so the system is often unable to make optimal judgement. Using decision tree techniques, the expert system for the paprika smart farm is designed to create a control system with a decision-making structure similar to that of farmers using data generated by factors that depend on their surroundings. With the current smart farm control system, it is essential for farmers to intervene in the surrounding environment because it is designed to follow sensor values to the reference values set by the farmer. To solve this problem even slightly, it is going to obtain environmental data and design controllers that apply decision tree method. The expert system is established for complex control by selecting the most influential environmental factors before controlling the paprika smart farm equipment, including criteria for selecting decisions by farmers. The study predicts that each environmental element will be a standard when creating smart farms for professionals because of the interrelationships of data, and more surrounding environmental factors affecting growth.

• Journal of the military operations research society of Korea
• /
• v.37 no.1
• /
• pp.87-97
• /
• 2011

In this paper, we propose a new close combat expert system to overcome the difference of combat damage assessments between combat units belong to their own model in Combined Arms Integrated Interoperability System(CAIIS) which will be deployed in the early future. When it happens to engage in a battle among combat units belong to their own model in CAIIS, the result of damage assessment is different severely. This is related to CAIIS's confidence and need to be overcome. We propose the expert system for close combat damage assessment with a decision tree. Simulation results show that the proposed expert system is valid well. Because the proposed expert system is made not as an independent system but as an inner module type of CAIIS, CAIIS will be simpler system than we expect. And we will hope to reduce the cost of CAIIS.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.10a
• /
• pp.121-130
• /
• 1999

The objective of this paper is to apply Extended AND-OR Graph (EAOG)-related techniques to extract knowledge from a specific problem-domain and perform analysis in complicated decision making area. Expert systems use expertise about a specific domain as their primary source of solving problems belonging to that domain. However, such expertise is complicated as well as uncertain, because most knowledge is expressed in causal relationships between concepts or variables. Therefore, if expert systems can be used effectively to provide more intelligent support for decision making in complicated specific problems, it should be equipped with real-time inference mechanism. We develop two kinds of EAOG-driven inference mechanisms(1) EAOG-based forward chaining and (2) EAOG-based backward chaining. and The EAOG method processes the following three characteristics. 1. Real-time inference : The EAOG inference mechanism is suitable for the real-time inference because its computational mechanism is based on matrix computation. 2. Matrix operation : All the subjective knowledge is delineated in a matrix form, so that inference process can proceed based on the matrix operation which is computationally efficient. 3. Bi-directional inference : Traditional inference method of expert systems is based on either forward chaining or backward chaining which is mutually exclusive in terms of logical process and computational efficiency. However, the proposed EAOG inference mechanism is generically bi-directional without loss of both speed and efficiency.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.1
• /
• pp.53-64
• /
• 2006

Many researches and analyses have been focused on industrial accidents in order to predict and reduce them. As a similar endeavor, this paper is to develop an expert system for prevention of industrial accidents. Although various previous studies have been performed to prevent industrial accidents, these studies only provide managerial and educational policies using frequency analysis and comparative analysis based on data from past industrial accidents. As an initial step for the purpose of this study, this paper provides a comparative analysis of 4 kinds of algorithms including CHAID, CART, C4.5, and QUEST. Decision tree algorithm is utilized to predict results using objective and quantified data as a typical technique of data mining. Enterprise Miner of SAS and Answer Tree of SPSS will be used to evaluate the validity of the results of the four algorithms. The sample for this work was chosen from 10,536 data related to manufacturing industries during three years$(2002\sim2004)$ in korea. The initial sample includes a range of different businesses including the construction and manufacturing industries, which are typically vulnerable to industrial accidents.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.777-784
• /
• 1994

A design expert system for the ship structural design is developed to support inexperienced designers. To establish the knowledge-base, an expert system development shell, Nexpert, is used. Knowledge is extracted from the rules of a classification society of ships, and also from an existing ship structural program that is being used by ship designers. This knowledge is systematized using the objectoriented concept. The design support system is constructed by adding additional functions which are required for the conventional engineering design work. Added functions are; calculation of longitudinal strength, database of existing ship designs, graphical user interface, and visualization of design results. It is observed that visualizing the relationships among the rules, which are activated to draw a certain design decision, is helpful. The system can easily be updated according to changes of the rule books of ship classification societies.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1169-1172
• /
• 2002

This paper presents the development of an expert system for monitoring and control of an oil production facility. The objectives of developing an expert system for the oil production facility are to monitor the Important processing parameters in different sections of the facilities and to control battery operations in real time. By providing consistent, fast, and reliable decision support to operators, the expert system can be used for automated monitoring and control of a petroleum production facility located south of Regina in Saskatchewan, Canada. The system was implemented in Visual Basic 6.0.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.2
• /
• pp.133-139
• /
• 2001

Since a great number of 2D engineering drawings are being used in industry and at the same time 3D CAD becomes popular in recent years, we need to reconstruct 3D CAD models from 2D legacy drawings. In this thesis, a combination of a feature recognition method and an expert system is suggested for the 3D solid model reconstruction. Modeling primitives of 3D CAD systems are recognized and constructed by using the pattern matching technique of the features modeling. Additional information for the 3D model reconstruction can be generated by extracting symbols or text entities which are related to form entities. For complex and indefinite cases which cannot be solved by the process of feature recognition, an expert system with a rule base has been used for decision-making. A 3D reconstruction system which recognizes 2D DXF drawing files has been implemented where models composed with protrusions, holes, and cutouts can be handled.