• 대한치과교정학회지
• /
• 제11권1호
• /
• pp.17-23
• /
• 1981

This experiment was performed to investigate the response of inorganic substances in alveolar bone in relation to the experimental tooth movement. Right canine in maxillary jaw was tipped in cats by coil springs generating 80 gm. force, in mandibular jaw, the force was 100 gm. force. Cats were divided into five groups and orthodontically treated for one hour, 1, 7, 14 and 28 days, respectively. Alveolar bone samples were obtained from tension and compression sites as well as from contralateral control sites. The level of calcium of alveolar bone was determined by atomic absorption spectrophotometry and inorganic phosphorus was measured by spectrophotometry. The results obtained were as follows: 1. In tension and compression site of maxillary alveolar bone, calcium levels were decreased at 1, 7 and 14 days, but recovered at 28 days. 2. The levels of inorganic phosphorus in compression site of maxillary alveolar bone had little change but in tension site of maxillary alveolar bone , phosphorous levels were decreased, 3. Calcium levels in tension and compression site of mandibular alveolar bone were decreased, especially at 28 days. 4. In tension and compression site of mandibular alveolar bone, inorganic phosphorus were slightly decreased from 1 day.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1827-1836
• /
• 1997

In this paper, the clamping type forging of helical gears has been investigated. Clamping type forging is an operation in which the product is constrained to extrude sideways through an orifice in the container wall. Punch is cylindrical shaped. The punch compresses a cylindrical bilet placed in a die insetr. As a consequence the material flows in a direction perpendicular to that of punch movement. The forging has been analysed by using the upper-bound method. A kinematically admissible velocity field has been developed, wherein, an involute curve has been introduce to re4present tooth profile of the gear. Numerical calculations have been carried out to investigate the effects of various parameters, such as module, number of teeth, helix angle, friction factor and initial height of billet on the forging of helical gears. Some firgiing experiments were catrried out with aluminium alloy to show the validity of the analysis. Good agreement was found between the predicted values of the forging load and obtained from the experimental results.

• 대한치과교정학회지
• /
• 제31권5호
• /
• pp.525-534
• /
• 2001

치아이동시 골세포간 활성 조차에서 세포간 교통의 중요성이 차츰 인식되고 있으며 세포간 교통을 위한 교통반의 존재가 확인되고 있다. 동물실험 모델에서 실험적 치아이동을 통해 조성된 압박 및 견인측 치주인대에서 교통반 단백의 일종인 connexin 43의 발현을 관찰함으로써 인접 연조직 및 골 조직 내에서 세포 신호 전달 양상의 한 부분을 파악하고자 하였다. Sprague-Dawley계 백서 27마리를 대조군(3마리)과 실험군(24마리)으로 나누었으며, 실험군은 견인력(75g)을 가한 후 12시간, 1일, 4일, 7일, 14일, 28일이 경과한 후 각각 4마리씩 희생시켜, connexin 43의 발현을 면역조직화학적으로 관찰한 바 다음과 같은 결과를 얻었다. 1. 대조군에서의 connexin 43 발현은 치은, 상아질, 치주인대, 치수, 골세포에서 경미하였다. 2. 교정적 치아이동에 반응하는 치수, 치주인대, 골모세포, 파골세포, 골세포부위에서 connexin 43의 발현이 많았으나 치은, 상아질, 상아모세포에서의 발현은 견인력 적용기간에 관계없이 대조군과 큰 차이가 없었다. 3. 치수에서 connexin 43의 발현은 교정력을 가한 4일에서부터 증가하여 7일째까지 크게 증가한 후 14일째부터 감소되었으며 28일째에는 대조군과 차이가 없었다. 4. 치주인대에서 connexin 43의 발현은 주로 혈관을 중심으로 치조골 면을 따라 압박측에서 주로 나타났는데 교정력을 가한 12시간에서부터 증가하여 4일에서 가장 많은 발현을 보인 후 7일부터 감소하기 시작하였다. 5. 골모세포 및 골세포에서 발현은 실험 1일째부터 출현해 4일째에 가장 많은 발현을 보였고 7일 이후에는 크게 감소하였으며 파골세포에서의 발현은 골모세포와 골세포보다 실험 4일째에 더 많이 관찰할 수 있었다.기계화와 자동화(26.2%), 정성부족으로 인한 맛의 감소(21.6%) 순으로 나타났고, 성별(p<0.01), 연령별(p<0.05)로 유의적 인 차이를 보였다. 7. 전통음식 패스트푸드점이 생기면 이용도에 관한 견해는 '가끔 이용할 것이다'가 56.5%, '많이 이용할 것이다'가 19.8%로 나타났고, 연령별(p<0.05), 주거상태별(p<0.05)로 유의적인 차이를 보였는데 연령이 많을수록 '이용치 않겠다'는 비율이 높았고, 특히 주거상태별로는 '전혀 이용치 않을 것이다'의 비율이 하숙생이 높게 나타났다. 본 연구는 유행에 민감하고 문화의 변화를 주도하며 패스트푸드를 가장 많이 이용하는 세대인 대학생들을 대상으로 우리의 전통음식을 패스트푸드화 하였을 때의 견해를 알아보고 그 전망을 살피기 위한 연구였다. 연구결과에서 나타난 바와 같이 유행의 첨단을 달리는 신세대라 하더라도 많은 비율의 대학생들이 전통음식의 패스트푸드화에 전망을 밝게 보고 있었으며 이를 위해서는 많은 문제점도 지적하였다. 이에 전통음식의 패스트푸드화와 상품화에 대한 인식이 고무적인 방향으로 변화하고 있어 앞으로 계속 그 추이를 연구할 가치가 있다고 사료된다.ematured infants during the early weeks of life. 모든 치근단 수준에서 비표준화 medium 크기 master cone 사용군이 ISO 표준화 규격의 master cone 사용군에 비해 유의하게 높은 gutta-percha 면적비를 나타내었다 (p < 0.01). 비표준화 medium크기 master cone 사용군에서는 표준화 규격의 master cone 사용군에 비해 유의하게 적은 수의 accessory cone이 사용되었다 (p < 0.01). 대학생간에는 유의한 차이(p<0.05)가 인정되었다. 응답자의 체형은

• 대한치과교정학회지
• /
• 제31권4호
• /
• pp.467-477
• /
• 2001

이 연구의 목적은 호선으로 유도되는 치아이동을 실험실에서 실험하는 동안 브라켓과 선재의 운동 마찰저항에 대한 브라켓 수, 브라켓 폭경, 선재 크기가 미치는 영향을 관찰하기 위한 것이다. 상악 제 1, 2소구치, 제 1대구치와 유사한 크기의 레진 치아를 사용하였으며, 치주인대와 탄성계수가 비슷한 폴리 에테르 인상재를 사용하였다. 스테인레스 스틸 트윈 에지와이즈 브라켓으로 좁은 폭경 (2.4 mm), 중간 폭경 (3.0 mm), 넓은 폭경 (4.3 mm)을 사용하였으며, 강선으로는 0.016, 0.018, $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$인치의 굵기를 사용하였고, 결찰은 합성고무링을 이용하고, 제1소구치에 부착된 좁은 폭경 브라켓 1개, 제 1, 2소구치에 부착된 2개의 중간 폭경 브라켓 및 제 1, 2소구치와 제 1대구치에 부착된 3개의 중간 폭경 브라켓과 각 강선 사이의 운동 마찰저항력을 계측하여 다음의 결론을 얻었다. 1. 좁은 폭경, 중간 폭경, 넓은 폭경 세 종류의 브라켓 모두에서 교정용 선재의 단면 크기가 증가할수록 마찰저항력도 증가하였다. 2. 0.016, 0.018인치 원형 강선은 브라켓 폭경이 증가하면 운동마찰저항력은 감소하며, $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$인치 각형 강선은 브라켓 폭경이 증가하면 운동마찰저항력이 증가하는 경향이 있었고0.016인치 원형 강선과 폭경이 다른 브라켓과의 운동마찰저항력 사이에는 통계적으로 유의차가 없었다. 3. 중간 폭경 브라켓의 수가 증가할수록 마찰저항력은 크게 나타났으며, 그 증가율은 브라켓의 수에 비례하였으나 정수배로 증가하지는 않았고 강선의 굵기에 따라 차이가 있었다.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.35-46
• /
• 1979

A number of experimental studies have been carried out in order to clarify the question as to how temporomandibular joint adapt to the changes of mandibular movement and occlusal equilibration. Recently, the studies on the interrelations between anatomical structure of temporomandibular joint and the state of occlusion have been actively performed in dentistry particularly in prosthodontic field. Author performed extraction of unilateral mandibular molars in 30 mature male rats, and observed histological changes of temporomandibular joint through the light microscope. Following results were obtained. 1. The loss of unilateral teeth gave rise to the changes in the location of condylar head, that is, interior displacement of condylar head in the extraction side and upper displacement in the non-extraction side. 2. Articular disk was compressed by the interior surface of condylar head, resulting in its extension below the condylar neck in the extraction side, and the histological arrangement of the compressed area showed irregular feature. 3. The extension of articular disk below the condylar neck was accompanied with the contraction of muscle fibers which were originated from the articular disk. 4. The cartilage layer of articular fossa to the exterior of the extraction side showed hypertropy. 5. Early in the experiment, the inernal extremity of condylar head of extract ion side showed bone resorption, and cartilage layer of condylar head showed hypertropy. At 12 weeks after experiment, the condylar surface showed flattened, and the cartilage layer of condylar head was replaced by the compact bone. 6. The articular disk showed the formation of pannus in the extraction side as well as in the non-extraction side. 7. The occlusal disturbance due to unilateral missing teeth has brought about the non-inflammatory retrogressive change and osteoarthrotic change late in the experiment.

• 대한치과교정학회지
• /
• 제22권4호
• /
• pp.823-836
• /
• 1992

Guiding a tooth along an arch wire results in a counteracting frictional force among arch wires, bracket and ligature. This frictional forces should be eliminated or minimized when orthodontic teeth movement is being planned. The purpose of this study was to evaluate the changes of width, cross-sectional forms and surface morphologies of stainless steel wire and $Elgiloy^{\circledR}$ wire after electropolising. Experimental variables included in this experiment were arch wire materials, current, electrolyte temperature and polishing time. Wire widths were measured by micrometer and cross-sectional forms and surface morphologies were examined with optical microscope and scanning electron microcope. The results were as follows: 1. The mean and standard deviation of widths of stainless steel wire and $Elgiloy^{\circledR}$ wire varying polishing time with condition of $249A/dm^2$ and $20^{\circ}C,\;249A/dm^2$ and, $332A/dm^2$ and $20^{\circ}C$ and $332A/dm^2$ and $250^{\circ}C$ were obtained. 2. With increasing polishing time, the widths of stainless steel wire and $Elgiloy^{\circledR}$ wire became decreased proportionally 3. The changes of widths of stainless steel wire and $Elgiloy^{\circledR}$ wire were statistically insignificant between $20^{\circ}C$ group and $25^{\circ}C$ group, but significant between $249A/dm^2$ group and $332A/dm^2$ group. 4 The cross-sectional forms of wire after electropolishing were not changed in stainless steel wire, and while it were changed to rounded corners in $Elgiloy^{\circledR}$ wire. 5. The surface morphologies of wire after electropolishing were scratch-absent and more smoothened both in stainless steel wire and $Elgiloy^{\circledR}$ wire.

• 대한치과교정학회지
• /
• 제35권5호
• /
• pp.371-380
• /
• 2005

제1소구치 또는 제2소구치 발치 후 발치공간 폐쇄 시 치아이동의 양상 즉, 치아이동방향과 이동량을 구명하는 것이 본 연구의 목적이었다. 상악 우측 인공 치조골부에 제1소구치 또는 제2소구치를 제외한 중절치부터 제2대구치 까지 실험용 치아들을 식립하고 bull loop이 형성된 반쪽 호선에 15도의 gable bend를 부여한 후 전치부를 후방견인하여 발츠공간을 폐쇄시켰다. 실험 전후에 교합면 방사선사진과 시상면 방사선사진을 촬영하고 인공치조골부 하단에 식립된 기준표지점에 중첩하여 이동방향 및 이동량을 계측하였다. 그 결과 제2소구치 발치군의 전치부후방이동량이 제1소구치 발치군에 비해 더 적었으며 구치부의 고정원 소실 및 고정원의 근심설측회전량은 제2소구치 발치군에서 더 크게 나타났다.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.189-207
• /
• 1988

In almost all biologic systems, mechanically induced electric charge separation is a fundamental phenomenon. Since the hypothesis was established that the generation of electric potentials in bone by mechanical stress including muscular force might control the activity in bone by mechanical stress including muscular force might control the activity of osseous cells and their biopolymeric byproduct, the concept of electrically mediate growth mechanism, which involves biological growth and bone remodeling by any means, in living systems has been applied clinically and experimentally to orthopedic fracture repair, the regulation of orthodontic tooth movement, epiphyseal cartilage regeneration, etc. On the other hand, recent numerous research data available show apparently that the mandibular condyle has the characteristics of growth center as well as growth site. In addition, there exists a considerable difference of opinion as to the role of external pterygoid muscle in condylar growth. In view of these evidences, this. experiment was performed to investigate the effect of the galavic current on the growth of the mandible and condyle for elucidating the nature of condylar growth. The bimetallic device was composed of silver and platinum electrode connected with resistor (3.9 Mohm), which was expected to produce galvanic current of 23.6 nA according to the galvanic principle. The 25 Sprague-Dawley rats were divided into two group, 2 week group comprising 8 animals exposed to satanic current for 2 weeks and 3 control animals not exposed for 2 weeks, 4 week group comprising 10 animals in experimental group and 4 animals in control group applied for 4 weeks respectively. The experimental rats were subjected to application of the galvanic current invasively to codylar head surface and the control groups with sham electrode. On the basis of anatomic and histologic data from the mandibular condyle of experimental and control group, the following results were obtained. 1. After 2 weeks, there was no increase of mandibular size in experimental group over that of the control group. 2. After 4 weeks, the size of the condylar head was larger in experimental group than that of the control. 3. In 2 week group, the thickness of the mitotic compartment and hypertrophic chondroblastic layer was increased in experimental group. 4. In 4 week group, the number and the size of the hypertrophic chondroblasts were increased significantly on experimental group over that of the control group. 5. The application of the satanic current caused an increase in chondrocytic hypertrophy and intercellular matrix in both groups.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.285-294
• /
• 1991

The human temporomandibular joint as a ginglymoarthrodial one has much in common with the other synovial joints of the body, but it does possess an unique charachteristic in that it must accomodate the various occlusal relations of dentition during an end point of closure. For that reason, the movement of the condyle in the temporomandibular joint is susceptible to influences from the nature of occlusion. Undue loading to the temporomandibular joint can be applied on the occasion of premature contacts in centric relation, balancing side interferences, change of occlusal surfaces due to excessive attrition, loss of tooth. Such occlusal disharmonies in association with the systemic and emotional factors may give rise to the temporomandibular disorder. On the other hand, the changes of occlusal patterns in the growing body can also have an effect on the growth of the temporomandibular joint through the alterations of functional stresses. The purpose of this study was to observe histopathologic response of the temporomandibular joint in unilateral chewing on one side exclusively for 10 months. Three dogs showing normal masticatory function were chosen. One dog aged about 12 months was for control, two dogs for experimental specimens were about 12 and 18 months old respectively. For chewing on the left side only, unilateral lower right premolar and molar were extracted in two experimental specimens. And then three dogs were sacrificed 10 months later. Frontal histologic sectioning of joints were done for the observation of the effects of one-side chewing. 24 specimens from three dogs were obtained and fixed in 10% formalin and routinly processed with H-E staining for histologic examination. The light microscopic findings were interpretated as follows: 1. Experimental specimen 1 aged about 22 months: In comparison with control and right non-chewing side, the proliferative and hypertrophic zone were increased at the mesial and lateral part of left chewing side condyle. There was no change of the articular tissue of temporal bone. 2. Experimental specimen 2 aged about 28 months: The articular tissues of adult joint were observed. The differences between the chewing and non-chewing side were not seen in the articular tissues of condyle and temporal bone.

• 대한치과교정학회지
• /
• 제16권2호
• /
• pp.53-67
• /
• 1986

The physical tooth movement by orthodontic force is based upon alveolar bone resorption at compression site and new bone formation at tension site of the alveolar socket. The function of the cyclic AMP is to participate not only in initial action of bone cells by mechanical forces but also in the continuous cellular response leading to bone remodelling. This experiment was performed to clarify the role of cyclic AMP in bone remodelling by mechanical force in the NORMAL group, the DIABETES group and the INSULIN TREATED group. The 72 rats were divided into the NORMAL group, the DIABETES group and the INSULIN TREATED group. The same orthodontic forces were applied to the rats of 3 groups. These rats were treated for periods of time ranging from 1 hour, 1 day, 7 days, 14 days, 21 days and 28 days. The samples of alveolar bones were obtained from compression and tension sites surrounding the tipping teeth from NORMAL, DIABETE and INSULIN TREATED rats. The samples were assayed for cyclic AMP by the cyclic AMP RIA kit. The results were as follows: 1. The cyclic AMP levels of alveolar bone in compression and tension sites showed initial decrease, then increased and .remained elevated by the time consuming. 2. The highest cyclic AMP level showed in the DIABETES group and the lowest level was in the NORMAL group. 3. The cyclic AMP levels in the INSULIN TREATED group was similar with the NORMAL group in control and tension sites, but in the compression sites it was similar with the DIABETES group.