• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.4
• /
• pp.371-378
• /
• 1997

The purpose of this research was to investigate the effect of P fertilization and cutting fkquency without N fertilizer on nutritive value and nitrogen fixation activity of alfalfa. A field experiment was conducted on the experimental farm of Kongju National University at Yesan from 1994 to 1996. The experimental design was a split plot design with two P levels as main plot and two cutting frequencies as the sub-plot. The results obtained are summarized as follows. Available phosphate, exchangeable Ca and Na in the soil were slightly increased with P fertilizer and basal treatment of lime. Average DM yield was 1.5 ton and 1.4 ton in second and third year. There was no significant difference within P level and cutting kquency. The first cut showed higest CP value as cutting times increased the value tend to be lowered. Crude protein content in 3 and 4 cutting regimes were from 16.3 to 16.6% 17.4 to 17.9% respectively, but no significant effect were found among the main and sub-plot. ADF and NDF in 1995 were ranged from 38.2 to 39.9, 45.1 to 58.1% respectively. ADF was 2% more higher in 1996 compared to previous year and NDF was slightly higher in 1996. There was significant difference of ADF between main plot in 1995. .P, Ca, K and Mg of 200kg P level with 3 times cutting treatment in 1995 and 1996 were 0.32 and 0.23, 0.95 and 0.84, 3.24 and 2.87, and 0.36 and 0.26. Significant difference of K and Mg between cutting frequency was observed in 1995. Nitrogen fixing activity of 400kg P fertilizer plots were higher than 200kg P level and 3 times cutting plot also showed higher acetylene reduction activity than that of 4 cutting per year. Phosphate level and cutting frequency treatment of did not significantly affect nitrogen fixation activity.

• The Korean Journal of Ecology
• /
• v.23 no.6
• /
• pp.423-429
• /
• 2000

To understand the effects of elevated $CO_2$ concentration and temperature on seedling emergence of seven herbaceous species, the seedling emergence was monitored between November 1997 and May 1998 using a temperature gradient chamber and a $CO_2$-temperature gradient chamber. Experiment was conducted under current ambient condition (Control plot), 2$^{\circ}C$-warmed condition with ambient $CO_2$ (T2 Plot), 4$^{\circ}C$-warmed condition with ambient $CO_2$ (T4 plot). and 4$^{\circ}C$-warmed condition with 1.8 fold of ambient $CO_2$ (CT4 plot). Species tested in this study were Digitaria adscendens, Echinochloa crus-galli, Panicum bisulcatum, Setaria viridis. Oenothera biennis, Andropogon virginicus, and Imperata cylindrica. Each species often dominates in the herbaceous stage of secondary succession in Japan. The mean seedling emergence times for all species were significantly increased to 23.6 and 32.2 d in the T2 and T4 plot compared to the Control plot, respectively. The most sensitive and insensitive species in seedling emergence time in T2 plot were O. biennis and D. adscendens, respectivel.y, and those in the T4 and CT4 plot were I. cylindrica and D. adscendens, E. crus-galli and A. virginicus, respectively. All experimental species showed no significant difference in the seedling emergence rate between treatments except for O. biennis and I. cylindrica. O. biennis showed a great decrease in the seedling emergence rate from 83.3% in the Control plot to 38.0%, 14.7%, and 29.3% in the T2, T4, and CT4 plot, respectively. Elevated $CO_2$ had very little effect on the seedling emergence. From these observations, it is expected that increased temperature would greatly advance the vegetative recovery time after disturbance through the advancement of seedling emergence time.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.72-79
• /
• 2010

This research was initiated to investigate the revegetation characteristics under seedling types of native woody plants on a disturbed slope. 4 different seedling types of woody plants (control, unit seedling plot, nature seedling plot, pot seedling plot) with the same woody plants (Rhus chinensis Mill, Albizzia julibrissin Duraz., Quercus acutissima Carr., Pinus densiflora S. et Z.) were treated with 3 replications on the experimental disturbed slope. Data such as the died number of native woody plants, growth height and visual quality were analyzed. The died number of plants were high in unit seedling plot when compared to the rest plots of seedling types. From the standpoint of died plant species, the died number were high in Rhus chinensis and Albizzia julibrissin whereas the died number were low in Quercus acutissima and Pinus densiflora. That's because we used 1-year old seedlings of Rhus chinensis and Albizzia julibrissin and 3-year old seedling Quercus acutissima and Pinus densiflora. This result indicated that the died reason of native woody seedling was not species but seedling age. Both growth height and visual quality were ranked first in the pot seedling plot, second in the nature seedling plot, third in the unit seedling plot, and last in the control plot, respectively. However, the difference of both growth height and visual quality in each seedling plot was not observed on the 11 months after planting. Especially, the main reason of low rooting and growth value in the unit seedling plot was due to wooven fabric outer crust of pot that obstruct seedling rooting into the soil. We concluded that pot seedling of native woody plants was effective in the viewpoint of the ecological disturbed slope revegetation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.3
• /
• pp.97-106
• /
• 2006

The pollutant concentrations at experimental paddy plots with three (excessive, standard, reduced) different fertilization rates were investigated during 2001-2002 irrigation seasons. Mean concentrations of pollutants in ponded water were not significantly different among three experimental plots, but the T-N concentrations in percolated water significantly depended on fertilization rates. The T-N, T-P and $COD_{Cr}$, concentrations in ponded water during early irrigation season (late May to mid-June) were much higher than those during later irrigation season likely due to fertilization and low uptake by young rice crops. The T-N concentrations decreased but the concentrations of T-P and $COD_{Cr}$, increased three days after tillering fertilization. The removal rates of T-N by paddy plots were $0.13-0.16g/m^2{\cdot}d$ for an excessive fertilization plot, $0.08-0.25g/m^2{\cdot}d$ for a standard fertilization plot, and $0.03-0.34g/m^2{\cdot}d$ for a reduced fertilization plot three days after tillering fertilization. On the other hand, T-P and $COD_{Cr}$, were released three days after tillering fertilization.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.47-53
• /
• 2014

We investigated the effect of straw mat cover and soil amendments on the reduction of runoff, non-point source pollution load and yield of a Chinese cabbage from alpine fields. Two plots on sandy loam soil were prepared. Experimental treatments were control and rice straw mat cover (3,300 kg/ha)+Polyacrylamide (PAM) (5 kg/ha)+Gypsum (1 ton/ha) (SPG). A variety of Chinese cabbage was cultivated and runoff was monitored during a growing season in 2012. Monitoring was conducted to seven times. Runoff rate of SPG plot was lower than those of control plot. The reduction rate of runoff from SPG plot was 29.4 % compared to control plot. The reduction rate of suspended solids (SS), total nitrogen (TN) and total phosphorus (TP) load of SPG plot was 86.5 %, 34.7 % and 39.1 %, respectively. Yield of a Chinese cabbage from SPG plot (39,646 kg/ha) was greater than that of control plots (28,482 kg/ha). It was concluded that the use of SPG on soil surface could not only reduce the NPS pollution loads in receiving waters but also help increase the crop yield.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.56-64
• /
• 1970

The present experiments differning from that conducted by agriculturists with the first consideration of food or seed production were performed in order to investigate the density effect on dry matter production in the artified population of maize. Three experimental plots were established and one seed was sown in the first plot, 2 seeds in the second plot and 3 seeds in the third plot, respectively. The space of each ridge was designed with 30cm in width and 50cm in length. The space of each seed was 4cm and the growth amount by density was measured through three times. The results obtained are as follows: 1) The total growth amount per unit area was in the order of the third, second and first plots until the second sampling. At the third sampling the whole plots showed almost the same growth amount except the first plot which showed a slightly smaller amount. 2) The growth amount per individual plant was in the order of the third, second and first plots until the second sampling, while the first plot showed drastic growth compared with the other two plots at the third sampling. 3) The growth amount by each organ(leaf, stem and root) of the plant body was markedly abundant in the stem of the non-productive part compared with that in the leaf of the productive part. Especially the root was affected remarkably by density and the first plot showed an abundant growth in comparison with the other plots which were too poor to resist the gound surface.

• Korean Journal of Microbiology
• /
• v.7 no.4
• /
• pp.153-158
• /
• 1969

It is the most important thing to substitute sweet potato for wheat flour as the brewing material of Maggerley(Korean wine) in order to save precious wheat flour which is now consumed as the sole material in it. In this study, the fermenting mash material has been prepared with combination of wheat (KIorean wine) as a first step of sabing wheat flour consuming. The combination ratio of wheat flour and sweet potato starch in mashing, in this experiment, are such as mashing plot of 100% wheat flour (No.3 plot), 50% wheat flour plus 50 % of sweet potato starch (No.2plot), 30% wheat flour plus 70% starch syrup of sweet potato (No. 4 plot), and 60% wheat flour plus sweet potato starch (No. 1 plot). The results of fermentation and chemical components of each mash in experimental plot are as following : 1. Alocholic fermentation was most vigorous in No.4 plost among them, the next are in order to hydrolyze and break down the protein sourece to glucose and amino acid, the new enzymic source were added in experimantal amsh before putting yeasts, those enzymic sources have been developed and prepared in this laboratory No.4 and No.2 plot at same degree. Generally, the activities of alcholic fermentation of all plots are vigorous and fair. The acidity of each fermented mash is in the rangw of 3.7-4.8. 2. Amounts of amino acids in fermented mash are in the range of 145 mg per 100 ml and 158 mg for all experiments, and these amounts are much more than those of present commerical Maggerley. However, the amount of it in the No.4 plots is much less among the m, this is due to the lack of protein source in starch syrup. 3. Amounts of organic acids in fermented mash are in the range of 0.44g per 100ml and 0.62g, these amounts are generally much more than those of the present commercial Maggerley. 4. The result of sensory test for the experimental Maggerley shows good taste and flavour in comparison with those of commercial Maggerely. 5. It is proved that these experimental fermentation of Maggerley is succesful in the partial substitution of sweet potato starch potato starch for wheat flour, and it is also be able to make a good Maggerley in all aspects of quality.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.1
• /
• pp.31-44
• /
• 1989

In the vinyl house cultivation, the water consumption, evapotnanspirafion ratio, growth condifion by the growing stages and yields of tomato and cucumber were investigated when they cultivated by nutriculture, rice hull charcoal culture and NFF culture. The results obtained are summarized as follows: 1. The mean air temperature in the vinyl house during the experimental perica j was 1.9$^{\circ}$C higher than the outdoor air temperature, the rrnocirnum and minimum air temperature in the vinyl house was 4.6C and 1.7$^{\circ}$C higher than the outdoor temperature, respectively, and the mean daily evaporation in the vinyl house during the experimental period was 4.3rnm that is 02rnrn more than the outdoor evaporation 2. In the tomato cultivation, the growth of rice hull charcoal culture was the best among the three methods, and the growth of NFT culture and nutriculture were worse than the soil cultivation which is standard, and among the nutriculture, the growth of EC 1.3m.mho plot was the best. 3. In the cucumber cultivation, the growth of rice hull charcoal culture was the best, and while the growth condition of NFT culture was worse than the standard soil cultivation, the growth of nutriculture was better than the standard soil cultivation, and the growth of EC 1.3m.mho plot was the highest among the different treatments in the nutriculture. 4. In the tomato cultivation, the total water consumption of rice hull charcoal culture plot was 1107.5rnm which is the highest amount among the three methods, and in the nutriculture, the total water consumption of EC 1.3m.mho plot was 22lAmm which is the highest among the three different treatments. 5. In the cucumber cultivation, the total water consumption of rice hull charcoal culture was 11762rnm which is the highest, and the total water consumption of EC 1.3m.mho plot was 284.9rnm which is more than the 278.9mm of EC 1.Smmho plot and 262.9mm of EC 1.7rnmho plot. 6. The crop coefficient(Kc) of tomato was 0.82 in NFT culture, 4.67 in rice hull charcoar culture and 0.86~0.91 in nutriculture. 7. The crop coefficient(Kc) of cucumber was higher than tomato as 1.13 in NFT culture, 520 in rice hull charcoal culture and 1.08~1.19 in nutriculture. 8. The evapotranspiration ratio in the mid and late season were higher than the beginning and elongation stage, and the average evaportranspiration ratio of tomato and cucumber was 3.81 and 424, respectively, in the rice hull charcoal culture plot. 9. In the tomato cultivation, the total yield per plant of rice bull charcoal culture was 1443.Og which is the highest, and in the nutriculture, their yields were worse because of the damage of downy nidew disease. 10. In the cucumber cultivation, the total yield per plant of rice hull charcoal culture was 1965.7g which is the highest, and while the yield of NFT culture was ahout 25% lower than the stadard soil cultivation, the yield of nutriculture was higher than the standard soil cultivation, and among the treatments in the nutriculture, the yield of EC 1.3m.mho plot was the highest.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.256-259
• /
• 2003

This paper presents the analyses of Auto CAD plot file for carving machine. The plot file is first analyzed and then sorted to properly perform a sequence of the line segments. The experimental results show that this technique can improve the carving performance, reduce the operating time, and save the tool and machine’s lifetime. In addition, this proposed technique can also be extended to apply for other coordinate machines.

• Smart Structures and Systems
• /
• v.11 no.3
• /
• pp.299-314
• /
• 2013

This paper presents a nonlinear time series analysis technique for evaluating machine defect severity, based on the Recurrence Plot (RP) entropy. The RP entropy is calculated from the probability distribution of the diagonal line length in the recurrence plot, which graphically depicts a system's dynamics and provides a global picture of the autocorrelation in a time series over all available time-scales. Results of experimental studies conducted on a spindle-bearing test bed have demonstrated that, as the working condition of the bearing deteriorates due to the initiation and/or progression of structural damages, the frequency information contained in the vibration signal becomes increasingly complex, leading to the increase of the RP entropy. As a result, RP entropy can serve as an effective indicator for defect severity assessment of rolling bearings.