• 한국전문물리치료학회지
• /
• 제14권2호
• /
• pp.1-10
• /
• 2007

The purpose of this experiment was to investigate the applicability of audio-visual modeling for improving the efficiency of rehabilitative programs by analyzing the effects of observing these various models on the capacity of stroke patients to perform upper limb activities. Twenty-one stroke patients participated in the experiment and were randomly assigned to either task modeling, sport modeling, or control group. During 2 weeks of intervention, subjects in all groups participated in the physical practice of experimental tasks. These tasks comprised of a Nine Hole Peg Test, the Jebsen-Taylor Hand Function tests, and locomotion. These tasks were performed 5 days a week, 30 min per day. In addition to the physical practice, the task modeling group observed a model performing experimental tasks and locomotive activities for 20 min, while the sport modeling group observed a model performing various sport activities for 20 min. Subjects' ability to perform the experimental tasks was measured 3 times, before, immediately after, and 1 week after the intervention. Analyses of the capacity to perform upper extremity activities displayed significant improvement from the pre-test to immediate and delayed post-tests in all groups. However, the amount of improvement was the highest in the task modeling group. The task modeling group was superior to the control group in the post-test of all experimental tasks, whereas the sport modeling group did not display significant differences from the control group. These results suggest that audio-visual modeling can be used as an effective cognitive intervention for facilitating the rehabilitation of stroke patients, and its rehabilitative effect can be maximized when the program is comprised of performance scenes directly related to the target task.

• Structural Engineering and Mechanics
• /
• 제74권4호
• /
• pp.559-565
• /
• 2020

This paper intends to progress models to accurately estimate the behavior of fresh concrete under vibration using artificial neural networks (ANNs). To this end, behavior of a full scale precast concrete mold was investigated numerically. Experimental study was carried out under vibration with the use of a computer-based data acquisition system. In this study measurements were taken at three points using two vibrators. Transducers were used to measure time-dependent lateral displacements at these points on mold while both mold is empty and full of fresh concrete. Modeling of empty and full mold was made using ANNs. Benefiting ANNs used in this study for modeling fresh concrete, mold design can be performed. For the modeling of ANNs: Experimental data were divided randomly into two parts such as training set and testing set. Training set was used for ANN's learning stage. And the remaining part was used for testing the ANNs. Finally, ANN modeling was compared with measured data. The comparisons show that the experimental data and ANN results are compatible.

• 디지털융복합연구
• /
• 제15권7호
• /
• pp.393-400
• /
• 2017

일반적으로 특수영상 및 3D 애니메이션 제작에서 캐릭터와 배경을 3D 모델링을 할 때 MAYA나 3DS MAX 등의 3D 프로그램을 사용하여 제작한다. 그러나 이러한 제작방식은 작업 시간이 많이 소요될 뿐만 아니라 고비용이 발생한다. 본 연구에서는 2D 포토스캔 제작기술을 활용한 3D 모델링 제작방법의 우수성과 효율성을 증명하기 위하여 두 가지 실험을 하였다. 첫 번째, 동일한 오브젝트를 다양한 방법으로 모델링을 하였다. 두 번째, 동일한 백그라운드를 각기 다른 방법을 이용하여 모델링을 하였다. 이 두 가지 실험을 통하여 효과적인 2D 포토스캔 제작방법으로 모델링 시 유의해야할 사항과 제작기술 등을 제시하였다. 또한 실험에 따른 결과물을 바탕으로 2D 포토스캔 모델링 제작방법의 효율성과 우수성을 증명하였다.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.137-142
• /
• 2009

One of the most important aspects of conducting this microbial risk assessment (MRA) is determining the model in microbial behaviors in food systems. However, to fully these modeling, large expenditures or newly laboratory experiments will be spent to do it. To overcome these problems, it has to be considered to develop the new strategies that can be used data in the published literatures. This study is to show whether or not the data set from the published experimental data has more value for modeling for MRA. To illustrate this suggestion, as example of data set, 4 published Salmonella survival in Cheddar cheese reports were used. Finally, using the GInaFiT tool, survival was modeled by nonlinear polynomial regression model describing the effect of temperature on Weibull model parameters. This model used data in the literatures is useful in describing behavior of Salmonella during different time and temperature conditions of cheese ripening.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.483-488
• /
• 2002

This paper is concerned with the experiments on the dynamic characteristics and modeling of plate with piezoceramic sensors and actuators. The experimental frequency response plots can be used to verify the theoretical modeling. Theoretical analysis will follow.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.535-548
• /
• 2015

A series of experimental results on thin mild steel plates clamped at the boundary subjected to gas detonation shock loading are presented. Detonation occurred by mixing Acetylene (C2H2)-Oxygen (O2) in various volume ratio and different initial pressure. The applied impulse is varied to give deformation in the range from 6 mm to 35 mm. Analytical modeling using energy method was also performed. Dependent material properties, as well as strain rate sensitivity, are included in the theoretical modeling. Prediction values for midpoint deflections are compared with experimental data. The analytical predictions have good agreement with experimental values. Moreover, it has been shown that the obtained model has much less error compared with those previously proposed in the literature.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제8권1호
• /
• pp.33-50
• /
• 2004

This study is intended to investigate the effect on the development of multiplicative thinking and multiplicative ability by teaching repeated addition, rate, comparison, area-array, and combination problems. Two research questions are established: first, is there any difference of multiplicative thinking between the experimental group(the modeling of problem situation learning group) and the control group(the traditional learning group)\ulcorner Second, is there any difference of multiplicative ability between the experimental group and the control group\ulcorner The treatment process for the experimental group is based on modeling problem situations for nine lesson periods. In order to answer the research questions the chi-square analysis was used for the first research question and the t-test was used for the second one. The findings are summarized as follows: there is no significant difference of multiplicative thinking be1ween the experimental and the control group but there is significant difference of multiplicative ability.

• Advances in Computational Design
• /
• 제5권3호
• /
• pp.323-347
• /
• 2020

The enhancements of bioenergy production effectiveness require the comprehensively experimental study of several parameters affecting these bioprocesses. The interpretation of the obtained experimental results and the estimation of optimum yield are extremely complicated such as misinterpreting the results of an experiment. The use of mathematical modeling and statistical experimental designs can consistently supply the predictions of the potential yield and the identification of defining parameters and also the understanding of key relationships between factors and responses. This paper summarizes several mathematical models used to achieve an adequate overall and maximal production yield and rate, to screen, to optimize, to identify, to describe and to provide useful information for the effect of several factors on bioenergy production processes. The usefulness, the validity and, the feasibility of each strategy for studying and optimizing the bioenergy-producing processes were discussed and confirmed by the good correlation between predicted and measured values.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.213-229
• /
• 2013

Although performance based assessment procedures are mainly developed for reinforced concrete and steel buildings, URM (Unreinforced Masonry) buildings occupy significant portion of buildings in earthquake prone areas of the world as well as in IRAN. Variability of material properties, non-engineered nature of the construction and difficulties in structural analysis of masonry walls make analysis of URM buildings challenging. Despite sophisticated finite element models satisfy the modeling requirements, extensive experimental data for definition of material behavior and high computational resources are needed. Recently, nonlinear equivalent frame models which are developed assigning lumped plastic hinges to isotropic and homogenous equivalent frame elements are used for nonlinear modeling of URM buildings. The equivalent frame models are not novel for the analysis of masonry structures, but the actual potentialities have not yet been completely studied, particularly for non-linear applications. In the present paper an effective tool for the non-linear static analysis of 2D masonry walls is presented. The work presented in this study is about performance assessment of unreinforced brick masonry buildings through nonlinear equivalent frame modeling technique. Reliability of the proposed models is tested with a reversed cyclic experiment conducted on a full scale, two-story URM building at the University of Pavia. The pushover curves were found to provide good agreement with the experimental backbone curves. Furthermore, the results of analysis show that EFM (Equivalent Frame Model) with Dolce RO (rigid offset zone) and shell element have good agreement with finite element software and experimental results.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1129-1138
• /
• 1999

This paper presents a systematic two-zone modeling for reliable performance prediction of centrifugal compressors. In order to improve the predictive capability, a modified jet slip factor is developed and new corrections for the wake flow deviation and mass fraction are suggested based on the comprehensive experimental data of the three Eckardt impellers. The proposed two-zone modeling is tested against nine sets of measured data of centrifugal compressors. The results are also compared with those obtained by the mean streamline analysis. It was found that the predictions by the present two-zone modeling agree fairly well with experimental data for a variety of centrifugal compressors over the wide operating conditions.