• 한국통신학회논문지
• /
• 제34권10C호
• /
• pp.975-982
• /
• 2009

본 논문에서는 저연산, 저지연성을 보장하는 다중 비디오 스트림 흔합 알고리즘을 제안한다. 제안된 알고리즘은 슬라이스기반 H.264/AVC 비디오 스트림들을 화소 도메인에서 혼합하지 않고 압축 도메인에서 신택스 비트스트림 변경에 의해 혼합한다. 혼합을 위한 신택스 비트스트림 변환은 혼합화면을 구성할 비디오 스트림들의 위치에 따라 변경한다. 실험결과 4개 이상의 비디오 스트림들을 고속으로 혼합할 수 있었다. 또한 표준 H.264/AVC를 지원하는 플레이어에서 화질열화 없이 재생할 수 있었다.

• 전력전자학회논문지
• /
• 제20권6호
• /
• pp.558-565
• /
• 2015

Gallium nitride high-electron mobility transistor (GaN HEMT) is the strongest candidate for replacing Si MOSFET. Comparing the figure of merit (FOM) of GaN with the state-of-the-art super junction Si MOSFET, the FOM is much better because of the wide band gap characteristics and the heterojunction structure. Although GaN HEMT has many benefits for the power conversion system, the performance of the power conversion system with the GaN HEMT is sensitive because of its low threshold voltage ($V_{th}$) and even lower parasitic capacitance. This study examines the characteristics of a phase-shifted full-bridge dc-dc converter with cascode GaN HEMT. The problem of unoptimized dead time is analyzed on the basis of the output capacitance of GaN HEMT. In addition, the printed circuit board (PCB) layout consideration is analyzed to reduce the negative effects of parasitic inductance. A comparison of the experimental results is provided to validate the dead time and PCB layout analysis for a phase-shifted full-bridge dc-dc converter with cascode GaN HEMT.

• Genomics & Informatics
• /
• 제4권3호
• /
• pp.118-124
• /
• 2006

For the direct understanding of flow, pathway data are usually represented as directed graphs in biological journals and texts. Databases of metabolic pathways or signal transduction pathways inevitably contain these kinds of graphs to show the flow. KEGG, one of the representative pathway databases, uses the manually drawn figure which can not be easily maintained. Graph layout algorithms are applied for visualizing metabolic pathways in some databases, such as EcoCyc. Although these can express any changes of data in the real time, it exponentially increases the edge crossings according to the increase of nodes. For the understanding of genome scale flow of metabolism, it is very important to reduce the unnecessary edge crossings which exist in the automatic graph layout. We propose a metabolic pathway drawing algorithm for reducing the number of edge crossings by considering the fact that metabolic pathway graph is scale-free network. The experimental results show that the number of edge crossings is reduced about $37{\sim}40%$ by the consideration of scale-free network in contrast with non-considering scale-free network. And also we found that the increase of nodes do not always mean that there is an increase of edge crossings.

• Smart Structures and Systems
• /
• 제14권2호
• /
• pp.105-128
• /
• 2014

The stochastic damage locating vector (SDLV) method has been studied extensively in recent years because of its potential to determine the location of damage in structures without the need for measuring the input excitation. The SDLV method has been shown to be a particularly useful tool for damage localization in steel truss bridges through numerical simulation and experimental validation. However, several issues still need clarification. For example, two methods have been suggested for determining the observation matrix C identified for the structural system; yet little guidance has been provided regarding the conditions under which the respective formulations should be used. Additionally, the specific layout of the sensors to achieve effective performance with the SDLV method and the associated relationship to the specific type of truss structure have yet to be explored. Moreover, how the location of truss members influences the damage localization results should be studied. In this paper, these three issues are first investigated through numerical simulation and subsequently the main results are validated experimentally. The results of this paper provide guidance on the effective use of the SDLV method.

• 소성∙가공
• /
• 제7권6호
• /
• pp.554-561
• /
• 1998

This paper describes a research work of developing a computer-aided design of lead frame semicon-ductor with piercing operation which is very precise for progressive working. An approach to the sys-tem is based on to knowledge-based rules. Knowledge for the system is formulated from plasticity theories experimental results and the empirical knowledge of field experts. This system has been writ-ten using AutoLISP to AutoCAD on a personal computer and is composed of three main modules which are input and shape treatment production feasibility check and strip-layout module. Based on the knowledge-based rules the system is designed by considering several factors such as material and thickness of product complexities of blank geometry and punch profile, and availability of press. Also strip-layout drawing generated by piercing operation according to punch profiles considered V-notch dimple. pad chamfer spank cavity punch camber and cross bow of lead frame is displayed in graphic forms. This system can be used by a novice who may not have any knowledge of tool design and will invrease efficiencies to the designer in this field.

• Structural Engineering and Mechanics
• /
• 제70권6호
• /
• pp.781-791
• /
• 2019

Earthquakes most often induce damage to structures, resulting in the degradation or deterioration of integrity. In this paper, based on the experimental study on 5 RC frames with different span length and different layout of buckling-restrained braces, the seismic damage evaluation law of RC frame with buckling-restrained braces was analyzed, and then the seismic damage for different specimens was calculated using different damage models to study the damage evolution. By analyzing and comparing the observation in test and the calculated results, it could be found that, damage evolution models including Gosain model, Hwang model as well as Ou model could better simulate the development of damage during cyclic loading. Therefore, these 3 models were utilized to analyze the development of damage to better demonstrate the evolution law for structures with different layout of braces and under different axial compression ratios. The results showed that from all layouts of braces studied, the eccentrically braced frame behaved better under larger deformation with the damage growing slowly. It could be deduced that the link beam benefited the seismic performance of structure and alleviated the damage by absorbing high values of energy.

• Journal of Information Processing Systems
• /
• 제19권3호
• /
• pp.334-346
• /
• 2023

An electronic document based on PDF has been widely used in customer communication between an enterprise and a customer to deliver personalized content. However, electronic documents based on PDF in the form of paper layouts are not suitable for mobile environments because of low readability and lack of interactive interaction. Even though HTML is an essential language in a mobile environment, electronic document based on PDF is still used as it has a content integrity verification feature with a digital signature. It means that a user is sacrificing user experience in a mobile environment for content integrity and using paper-layout electronic documents. In this research, we design the Document HTML specification by setting the Document HTML conformance, adding the extended meta tags, and signing the message digest with a digital signature based on public key infrastructure (PKI). Furthermore, we implemented the Document HTML system, which has REST API services to generate and verify the Document HTML, and did experimental verification of the theory. As a result, we have confirmed that the Document HTML has both content integrity and user experience on mobile. Furthermore, the Document HTML is expected to be an alternative document format to deliver personalized content from an enterprise to a customer in a mobile environment instead of the paper layout electronic document such as PDF.

• Earthquakes and Structures
• /
• 제12권1호
• /
• pp.79-89
• /
• 2017

As a new type of energy dissipation component with excellent mechanical performance, the Buckling-Retrained Braces (BRBs) were gradually applied in retrofitting and improving seismic performance of reinforced concrete structures in China. In order to investigate the seismic performance of reinforced concrete structures retrofitted with BRBs, quasi-static test of two single-bay and 3-story reinforced concrete frames specimens was conducted and introduced in this paper. Two 1/2 scaled specimens were designed to reflect real prototype structure. For comparison, one control specimen was designed without BRBs, and the other specimen was retrofitted with BRBs. And particularly, for the specimen retrofitted with BRBs, the BRBs were eccentric layout instead of usually concentric or x-shaped layout, aiming to be more suitable for large-span frames. In the test, the failure mode, carrying capacity, deformability, ductility and energy dissipation ability of both two specimens were investigated. Based on the test results of the measured hysterical curves, skeleton curves, the seismic performances such as bearing capacity, plastic deformability, energy dissipation ability and ductility of two specimens were fully studied. And from the test results, it was indicated that the specimen retrofitted with BRBs showed much better seismic performance than the control specimen without BRBs, and the BRBs could effectively improve the seismic performance of the reinforced concrete frame. For the specimen retrofitted with BRBs, the BRBs firstly yielded before the beam-ends and the column-ends, and an expected yielding process or yielding mechanism as well as good seismic performance was obtained. For the specimens without BRBs, though the beam-ends yielded prior to the column-ends, the seismic performance was much poor than that of the specimen with BRBs.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.30-36
• /
• 2018

기존 콘크리트 구조물의 노후화 또는 지진과 같은 외부 하중에 의하여 구조물의 구조 성능이 저하되기 때문에, 기존 건물의 보수 및 보강 연구는 중요하다. 외부부착 탄소섬유 보강 공법과 같은 효율적인 보수 공법을 사용하면 경제적으로 콘크리트 구조물의 구조 성능을 높일 수 있다. 따라서 외부부착 탄소섬유를 사용한 콘크리트 부재의 실험 연구는 많이 진행되었다. 특히, 콘크리트 보를 사용한 전단 보강에 관한 연구는 탄소섬유의 양, 부착 각도, 스트립의 폭, 그리고 재료간의 상호작용에 관한 것이었다. 하지만 선행된 연구에 비하여 탄소섬유의 이 방향 레이아웃에 관한 다양한 변수 연구는 부족한 상황이다. 따라서 이 연구에서는 이 방향 레이아웃 외부부착 탄소섬유 공법을 사용하여 콘크리트 보의 전단보강 효과를 검증하였다. 이 방향 레이아웃의 보강 효과는 스터럽과의 전단 기여도, 실험체의 전단 거동과 보강 시점에 따른 최대 내력의 비교를 통하여 이루어졌다.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.50-59
• /
• 2000

An experimental study has been carried out in order to investigate the heat storage characteristics for a latent heat storage tank with horizontal shell and tube type. The heat exchanger consisted of horizontal cylindrical capsules with a staggered tube bank layout. Based on the obtained data, the effects of flow rate and inlet fluid temperature on the melting time and heat storage rates were examined. It is found that the melting time decreased with increase of the flow rate and the inlet temperature. Results also show that at the initial stage of heat transfer the heat storage rate represents the maximum value and rapidly decreases.