• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.84-89
• /
• 2009

In this paper, the experimental study on the identification of noise sources and noise transmission paths was carried out for the cabin noise control of construction equipment. In order to investigate noise and vibration characteristics of cabin structure, sound absorption, transmission, and radiation tests were performed using cabin assembly models. The noise/vibration source levels were obtained from the real cabins of wheel loader and excavator. Using transfer functions of cabins and real cabins' source data, cabin noise was decomposed into airborne and structureborne noise transmissions. Finally noise sources and major transmission paths were successfully identified for wheel loader and excavator's cabins.

• Earthquakes and Structures
• /
• v.18 no.5
• /
• pp.599-607
• /
• 2020

This paper deals with the experimental investigation on the behavior of RCS beam-column exterior joints. Two full-scale specimens of joints between reinforced concrete columns and steel beams are tested under cyclic loading. The objective of the test is to study the effect of steel fiber reinforced concrete (SFRC) on the seismic behavior of RCS joints. The load bearing capacity, story drift capacity, ductility, energy dissipation, and stiffness degradation of specimens are evaluated. The experimental results point out that the FRC joint is increased 20% of load carrying capacity and 30% of energy dissipation capacity in comparison with the RC joint. Besides, the FRC joint shown lower damage and better ductility than RC joint.

• Journal of Korean Society of Steel Construction
• /
• v.8 no.3 s.28
• /
• pp.89-96
• /
• 1996

The objective of this study is to investigate the structural behavior of Concrete-Filled Steel Tubular Column connections using reinforced bar. The parameter of specimens is the area of each reinforced bar (SD40 : D13, D16, D19, D22, D25). The simple tensile experiment is conducted to 5 kinds of specimens. Estimating the load, displacement, and strain from each kind, we compared them to basic elementary type (Flange Type, Basic Type, DPA Type, DPB Type). In each specimen, We can get the yielding load obtained by the theoretical three failure modes which make it possible to predict the experimental results. Actually, through the comparison and analysis, we come to know that the experimental results and theoretical results are nealy the same. Further, we will exert to apply the connections using reinforced bar to construction of high-rise building.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.76-82
• /
• 1997

Recently as the development of a large-scale ocean structure or ocean is in progress, the importance of underwater concrete construction came to the fore. However, a problem with this underwater concrete construction is the segregation of cement and aggregate occurs when concrete is poured into the underwater. However, recently as an adhesiveness of the constituents of fresh concrete is increased even in our country, antiwashout concrete admixture were developed. The antiwashout concrete admixture can reduce the segregation significantly. Although this antiwashout underwater concrete is superior to the traditional underwater concrete in terms of durability, watertightness, stability, etc. But it is still unsatisfied due to the lack of criterion or construction experiences. Furthermore, because of an insufficiency of natural aggregate, the development of replacing aggregate came to be necessary. Accordingly, the purpose of this study is to investigate the feasibility of sea sand as a replacing aggregate and the characteristic change of antiwashout underwater concrete using river sand, sea sand, and blended sand (river sand:sea sand=3:7) through experimental researches.

• Computers and Concrete
• /
• v.12 no.1
• /
• pp.79-90
• /
• 2013

In this study, dynamic characteristics such as natural frequencies, mode shapes and damping ratios of RC frame is determined for different construction stages using Operational Modal Analyses method under ambient vibration. Full scaled, one bay and one story RC frames are selected as an application for different construction stages such as plane, brick in-filled and brick in-filled with plaster. The RC frame is vibrated by natural excitations with small impact effects and the response signals are measured using sensitive accelerometers during ambient vibration tests. Measurement time-frequency span and effective mode number are determined by considering similar studies in literature. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, output-only system identification technique is employed namely; Enhanced Frequency Domain Decomposition technique in the frequency domain. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of RC frames.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.199-202
• /
• 2008

The purpose of this study is to obtain the fundamental fire resistance performance of engineered cementitious composites(ECC) under fire temperature in order to use the fire protection material in high-strength concrete structures. The present study conducted the experiment to simulate fire temperature by employing of ECC and investigated experimentally the explosion and cracks in heated surface of these ECC. In the experimental studies, 3 HSC specimens are being exposed to fire, in order to examine the influence of various parameters(such as depth of layer=20, 30, 40mm; construction method=lining type) on the fire performance of HSC structures. Employed temperature curve were ISO 834 criterion(3hr), which are severe in various criterion of fire temperature in building structures. The numerical regressive analysis and proposed equation to calculate ambient temperature distribution is carried out and verified against the experimental data. By the use of proposed equation, the HSC members subjected to fire loads were designed and discussed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.243-244
• /
• 2016

The assembly of the modular housing is an important phase in the construction of pre-fabricated houses. However, the assembly tools that are commonly used in a work site have a disadvantage of decreasing the productivity and the quality. We have developed a exclusive tool for assembling modular parts. The structural stability of the developed tool has been verified in the previous studies. However, the experimental analysis was not conducted. This study analyzed the effect of improving the productivity and quality of the developed assembly tool. The result of the experimental analysis shows improvements in productivity and quality compared to the conventional assembly tool.

• Computers and Concrete
• /
• v.15 no.1
• /
• pp.73-88
• /
• 2015

Following previous studies, the current paper describes the results of an experimental program concerning the repair of reinforced concrete columns by thixotropic pseudo plastic mortar, preformed to analyze and quantify the influence of initial construction damage to the behavior of the repaired element. Five columns (section scale 1:2) were designed according to the minimum requirements of reinforcement of ductility orientated codes' design with variables the percentages of initial construction damages. All were tested in axial compression with repeated cycles up to failure. For comparison reasons, another one of the same characteristics, yet healthy, was constructed and tested as a reference specimen. A numerical study (Finite Element Analysis) was conducted for further investigation of the behavior of the thixotropic mortar as repair material. The results indicate that: a) surpassing a specific amount of damage, columns even suitably repaired present lower strain capacity, b) finite element analysis present the same way of deboning of the repaired material taking into consideration the buckling of the reinforcement bars.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.105-106
• /
• 2013

The construction of modern society, the use of high-strength concrete structures is becoming frequent. Admixture has been reported as a factor causing the explosion occurred. This study was experimental research on high strength concrete according to the kinds of admixture. Admixture of four different mix. fire resistance test results are outstanding when using blast furnace slag aggregate. When using silica fume spalling phenomena were most violent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.6-7
• /
• 2020

The government of South Korea enacted Earthquake Recovery Plan Act in 2008. In order to meet the requirement of this law, the important buildings, such as schools, public offices and so on, are in the process of seismic retrofit. This paper introduces the experimental data about a non-retrofitted concrete column and retrofitted column with a bolt assembly type CFT(concrete-filled steel tube).