• Journal of Korean Elementary Science Education
• /
• v.23 no.2
• /
• pp.152-158
• /
• 2004

The purpose of this study was to find the difficulties and problems in the carbon dioxide production experiment and to suggest the device for the improvement. Many students have misconception for the smell of carbon dioxide. I found that the smell of carbon dioxide of producting through the experiment didn't concern with the quantity of calcium carbonate. I certificated that the smell of carbon dioxide was related with the concentration of hydrochloric acid. I built two trap applicaing suction in the gas production device to exclude fully the smell of carbon dioxide. So the smell of carbon dioxide was not present by passing the two trap. To find the ideal experimental conditions I perform the experiment step by step. As the result enough carbon dioxide to use for the property experiment was collected under the condition that is 60 mL of 3 molarity hydrochloric acid and 30 g calcium carbonate. I certificated to mesuring flowing quantity of carbon dioxide using the flow meter of carbon dioxide. In the improvement experiment of the property of carbon dioxide, I proposed the experiment device regarding as spreading of the gas and children's interest. To improve the problem of gas production experiment, I proposed the gas certification device using a thread.

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.4
• /
• pp.1663-1668
• /
• 2018

This study was conducted to examine the effects of Evjenth-Hamberg stretching of the sternocleidomastoid, upper trapezius, and pectoralis major on the lung function of adults with forward neck posture. The subjects were 20 adult students in P university located in Pohang, Korea, whose degree of head forward displacement measured according to NEW YORK state posture test was mild. The subjects were randomly and equally assigned to the Evjenth-Hamberg Stretching group (EHSG, n=10) and the control group (CG, n=10). Their forced vital capacity (FVC), slow vital capacity (SVC), and maximal voluntary ventilation (MVV) were measured before and after the experiment. In within-group comparison, only the EHSG experienced statistically significant improvement in FVC, forced expiratory volume in the first second (FEV1), and peak expiratory flow (PEE) after the experiment, compared to before the experiment (.05

• Journal of Fisheries and Marine Sciences Education
• /
• v.22 no.4
• /
• pp.633-646
• /
• 2010

The purpose of this study was to actually analyze students' sociability using sociometry and effectiveness of students' sociability improvement. To accomplish this purpose, subjects of this study were selected as follow. First, how students' sociability style are actually identified. And second, when teachers give additional concern, opportunity, care, praise to experiment group(reject, isolate, neglectee), what is the effectiveness of students' sociability improvement. As sampling, from fourth to sixth grades 270 students(215 control group, 55 experiment group) of 8 classrooms of 8 elementary schools were sampled. As a tool of investigation, questionnaires about students' sociability style and effectiveness of sociability improvement had made by researcher of this study were used. And as processing of data, ANCOVA were used. The result of this study is as follow. When teachers gave additional concern, opportunity, care, praise to experiment group(reject, isolate, neglectee), students' sociability were improved. In other words, student's self-concept, proactive behavior, human relationship were improved significantly.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.63
• /
• pp.101-110
• /
• 2001

This study is concern with the design of experiment planning for quality improvement in flow shop manufacturing system. In this study, the procedure of two stage experiment planning are proposed and applied to the manufacturing process of Li/$MnO_2$ batteries. The result of in this paper is that, compared with the current process conditions, 52% of the insulation inspection process, 81.6% of the first premier discharge process, 98.5% of the second premier discharge process, 84.7% of O.C.V./C.C.V. process, and 86.2% of voltage inspection process are decreased. After a given period of time, the life of the batteries extends to 75 hours, which means the 15% improvement in capacity. In case that the proposed methods are applied to the process Improvements of the flow shop manufacturing system, the much effected in experimental cost- saving and quality improvement.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.411-414
• /
• 2004

In this paper, a power controller and 3 phase voltage source inverter are proposed for the improvement of weldability of large scaler Mash seam welder. The welder system is designed for the low cost and the improvement of weldability. For this system, the thyristor convertor has performed constant current controlling in the output terminal by using PAM type inverter. We have simulated our algorithm and made a prototype welder for experiment. Through the experiment, we have confirmed the improvement of weldability of our system.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1990.05a
• /
• pp.92-93
• /
• 1990

• Journal of Distribution Science
• /
• v.17 no.4
• /
• pp.51-57
• /
• 2019

Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.149-154
• /
• 1993

In heavy grinding that is on of the high efficient grinding method, meaningful deformation is generated by high temperature. So, after machining, geomeric error generated od the workpiece. The most important factor on the geometric error is temperature difference between upper layer and lower layer (T $_{d}$) . Relations between Td and grinding condition and maximum geometric error and grinding condition are obtained by experiment. This relations are used in fuzzy algorithm for improvement geometric accuracy. The main results are follows : (1) The linear relation between maximum geometric error and grinding condition is ovtained by experiment. (2) The linear relation between maximum temperature difference between upper layer and lower layer and grinding condition is ovtained by experiment. (3) Control peth of wheel for improvement geometric accuracy is obtained by using the fuzzy algorithm.m.

• Journal of Environmental Science International
• /
• v.31 no.2
• /
• pp.117-129
• /
• 2022

In this study, we investigated the characteristics of the meteorological and environmental conditions for a cloud seeding experiment over the Korean peninsula and estimated the available days for the same. The conditions of available days appropriate for a cloud seeding experiment were classified according to four purposes: water resources, drought relief, forest fire prevention, and air quality improvement. The average number of available days for a cloud seeding experiment were 91.27 (water resources), 45.93-51.11 (drought relief), 40.28-46.00 (forest fire prevention), and 42.19-44.60 days/year (air quality improvement). If six experiments were carried out per available day for a cloud seeding experiment, the number of times cloud seeding experiments could be conducted per year in a continuously operating system were estimated as 547.62 (water resources), 275.58-306.66 (drought relief), 241.68-276.00 (forest fire prevention), and 253.14-267.60 times/year (air quality improvement). From this result, it was possible to determine the appropriate meteorological and environmental conditions and statistically estimate the available days for a cloud seeding experiment. The data on the available days for a cloud seeding experiment might be useful for preparing and performing such an experiment.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.09a
• /
• pp.35-46
• /
• 1998