• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.146-154
• /
• 2005

Recently, the high-speed and intelligence technology of machine tools are developed for the high efficiency of productivity Under the operating condition from the high-speed of machine tools, the various failure modes can occur in core units of manufacturing system. Therefore it is for the reliability concept of machine tool to be required in a design level. And the above-stated technology must be accommodated in the feeding and spindle subsystem, etc those are the core units of machine tools. In this study, we are developed the test-bed of sliding cover (C-plate) in order to evaluating reliability and estimating failure modes of feeding subsystem under operating conditions. The reliability experiment using the developed test-bed and the additional structural analysis executed on single and double structure. We found out the weak parts of sliding cover and were able to predict a life cycle from the experiment results. In this study, we propose the new C-plate model with double link structure to apply the high-speed machine tool in the fundamental guideline.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.2
• /
• pp.153-160
• /
• 2002

As a way to assess the reliability of programs for building energy analysis, verification experiment and calculation of heating load are simultaneously conducted for a well-defined test space. Experimental conditions are carefully set to minimize uncertainties associated with radiation heating, air change, infiltration, and room-to-room interaction. Dyna- mic load calculations using TRNSYS, which are performed for two different computation domains, rely on the energy rate control that represents inherent load characteristics of a space. The predicted instantaneous heating load favorably simulates the overall behavior the measured one, though the latter fluctuates much more rapidly than the former Comparison of the accumulative load between the experiment and calculations shows a close agreement within an engineering tolerance, regardless of the computation model. It is deduced from such findings that the present experimental results along with weather information can serve as a set of reference data for validating load calculation softwares from the users'standpoint. In order to enhance the completeness of this work, a complementary study on the cooling load for the same test space is highly recommended.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.5
• /
• pp.449-457
• /
• 2013

Objective: The aim of this study is to investigate the effect of Hangul font on reading speed when texts are displayed on the computer screen. Background: Reading performance is influenced by fonts. However, there are few studies of Hangul font from a cognitive perspective. Fonts could affect reading performance directly and indirectly, interacting with other visual-perceptual factors such as size, word spacing, and line spacing. Method: In experiment 1, two variables were manipulated; a frame condition(square frame non-square frame) and a stroke condition(serif sans-serif). According to each condition, one of the four fonts was applied to the texts. The height of the four fonts was controlled. The participants were asked to read aloud the presented texts. In experiment 2, the non-square frame fonts were adjusted to have approximately the same size, width, letter spacing, and word spacing as the square frame fonts. The experimental design and task used in experiment 2 were identical with experiment 1. Results: In general, reading speed was faster in the square frame fonts than in the non-square frame fonts. The reading speed was not significantly different across stroke conditions. Conclusion: The frame of Hangul font significantly influenced reading speed. These results suggest that the type of Hangul font is a factor to affect reading performance. Application: The frame of fonts should be considered in designing of new fonts. The square frame fonts should be the preferred choice to enhance legibility.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.368-375
• /
• 2016

A sodiume-water reaction takes place when high-pressured water vapor leaks into sodium through a tiny defect on the surface of the heat transfer tube in a steam generator of the sodium-cooled fast reactor. The sodiume-water reaction brings deterioration of the mechanical strength of the heat transfer tube at the initial leakage site. As a result, it damages the crack itself, which may eventually enlarge into a larger opening. This self-enlargement is called "self-wastage phenomenon." In this study, a simulant experiment was proposed to reproduce the self-enlargement of a crack and to evaluate the mechanism of the self-wastage. The damage on the surface of the crack was simulated by making the neutralization reaction with hydrochloric acid solution and sodium hydroxide solution. A numerical investigation was carried out to validate the feasibility of the approach and to determine experimental conditions. From the computation results, it is observed that when 5M HCl is injected into 5M of NaOH with 0.05 m/s inlet velocity, the temperature at the surface near the crack increased over 319.26 K. The computational results show that the self-wastage phenomenon is capable of being reproduced by the simulant experiment.

• Nuclear Engineering and Technology
• /
• v.39 no.4
• /
• pp.327-336
• /
• 2007

The influence of density differences on the mixing of the primary loop inventory and the Emergency Core Cooling (ECC) water in the downcomer of a Pressurised Water Reactor (PWR) was analyzed at the ROssendorf COolant Mixing (ROCOM) test facility. ROCOM is a 1:5 scaled model of a German PWR, and has been designed for coolant mixing studies. It is equipped with advanced instrumentation, which delivers high-resolution information for temperature or boron concentration fields. This paper presents a ROCOM experiment in which water with higher density was injected into a cold leg of the reactor model. Wire-mesh sensors measuring the tracer concentration were installed in the cold leg and upper and lower part of the downcomer. The experiment was run with 5% of the design flow rate in one loop and 10% density difference between the ECC and loop water especially for the validation of the Computational Fluid Dynamics (CFD) software ANSYS CFX. A mesh with two million control volumes was used for the calculations. The effects of turbulence on the mean flow were modelled with a Reynolds stress turbulence model. The results of the experiment and of the numerical calculations show that mixing is dominated by buoyancy effects: At higher mass flow rates (close to nominal conditions) the injected slug propagates in the circumferential direction around the core barrel. Buoyancy effects reduce this circumferential propagation. Therefore, density effects play an important role during natural convection with ECC injection in PWRs. ANSYS CFX was able to predict the observed flow patterns and mixing phenomena quite well.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.46-51
• /
• 2020

The purpose of this study was to analyze the change in tensile strength characteristics of the weld when the welding speed and rotational speed of the tool, which are representative variables of the friction stir welding process. The equipment used in the experiment was Machining Center No. 5. The material used in the experiment is an AA6061-T6 alloy, and a rolled plate with a thickness of 2mm was used. Two experimental variables were selected, the welding speed of the tool and the rotational speed of the tool. The experimental conditions were selected in the range in which a healthy weld could be obtained through a preliminary experiment. The welding speed of the tool was increased to 100mm/min, 200mm/min, and 300mm/min, and the rotational speed of the tool was increased to 1000rpm, 2000rpm, and 3000rpm. As a result of the experiment, the tensile strength increased as the rotational speed of the tool changed at each tool welding speed. In addition, as the welding speed of the tool increased, the tensile strength of the weld was increased. The condition with the highest tensile strength of the weld was found to be a tool feed speed of 300 mm/min and a tool rotation speed of 3000rpm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.6
• /
• pp.374-381
• /
• 2000

This study was conducted to select sesame varieties with high cultural stabilities by comparing several parameters of agronomic traits under the different cultural environments. Of the six areas, Iksan and Jinju areas which showed positively larger environment index values were relatively adequate cultural conditions for sesame. At the comparison of cultural stability of agronomic traits by Eberhart and Russell regression model among sesame breeding lines, Suwon 169 showed more stable regression coefficient values to the number of capsules per plant, number of seeds per capsule and seed weight per plant, and Iksan 12 showed more stable regression coefficient values to culm length and weight per plant. At the comparison of cultural stability of yield per 10a, Suwon 169 and Iksan 12 among sesame breeding lines showed more stable respectively, deviation values of 0.99, 0.98 respectively, and more less regression deviation values of 0.074, 0.167 respectively. Therefore those breeding lines are comparatively higher stabilities to yield determining agronomic traits under the different cultural environments, and it was concluded that those two breeding lines had the possibility to recommend promising breeding lines in the future.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.15-18
• /
• 1984

This experiment was conducted to find out the factors governing the viviparous germination of In. $\times$ Ja. type rice varieties. Six varieties, i.e., Milyang 21, Raekyeong, Milyang 30, Yeongnamjosaeng, Nopoong and Mansuk, were used for this experiment. The viviparous germination easily occurred between 40 to 45 days after heading, and was easier in yellow-ripe stage or full-ripe stage than dough-ripe stage. The use of exceeding fertilization induced more viviparous germination than ordinary one. The early varieties such as Yeongnam-josaeng and Milyang 21, easily occurred the viviparous germination. The local conditions of viviparous germination were usually poorly drained soils and narrow alluvial valleys where were high humidity prevailed.

• Phonetics and Speech Sciences
• /
• v.15 no.1
• /
• pp.47-54
• /
• 2023

This study attempted to test the hypothesis that Korean evaluators can score L2 speech appropriately, even when speech rate features are unavailable. Two perception experiments-preliminary and main-were conducted sequentially. The purpose of the preliminary experiment was to categorize English-as-a-foreign-language (EFL) speakers into two groups-advanced learners and lower-level learners-based on the proficiency scores given by five human raters. In the main experiment, a set of stimuli was prepared such that the speech rate of all data tokens was modified to have a uniform speech rate. Ten human evaluators were asked to score the stimulus tokens on a 5-point scale. These scores were statistically analyzed to determine whether there was a significant difference in utterance production between the two groups. The results of the preliminary experiment confirm that higher-proficiency learners speak faster than lower-proficiency learners. The results of the main experiment indicate that under controlled speech-rate conditions, human raters can appropriately assess learner proficiency, probably thanks to the linguistic features that the raters considered during the evaluation process.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.131-143
• /
• 2023

Constitutive equations in a nuclear reactor safety analysis code are mostly empirical correlations developed from experiments, which always accompany uncertainties. The accuracy of the code can be improved by modifying the constitutive equations fitting wider range of data with less uncertainty. Thus, the sensitivity of the code with respect to the constitutive equations is evaluated quantitatively in the paper to understand the room for improvement of the code. A new methodology is proposed which first starts by dividing the thermal hydraulic conditions into multiple sub-regimes using self-organizing map (SOM) clustering method. The sensitivity analysis is then conducted by multiplying an arbitrary set of coefficients to the constitutive equations for each sub-divided thermal-hydraulic regime with SOM to observe how the code accuracy varies. The randomly chosen multiplier coefficient represents the uncertainty of the constitutive equations. Furthermore, the set with the smallest error with the selected experimental data can be obtained and can provide insight which direction should the constitutive equations be modified to improve the code accuracy. The newly proposed method is applied to a steady-state experiment and a transient experiment to illustrate how the method can provide insight to the code developer.