• Computers and Concrete
• /
• v.16 no.1
• /
• pp.37-48
• /
• 2015

Alkali aggregate reaction affects numerous civil engineering structures and causes irreversible expansion and cracking. This work aims at developing model to predict the potential expansion of concrete containing alkali-reactive aggregates. First, the paper presents the experimental results concerning the influence of particle size of an alkali-reactive aggregate on mortar expansion studied at 0.15-0.80 mm, 1.25-2.50 mm and 2.5-5.0 mm size fractions and gives data necessary for model development. Results show that no expansion was measured on the mortars using small particles (0.15-0.80 mm) while the particles (1.25-2.50 mm) gave the largest expansions. Finally, model is proposed to simulate the experimental results by studying correlations between the measured expansions and the size of aggregates and to calculate the thickness of the porous zone necessary to take again all the volume of the gel created by this chemical reaction.

• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.41-46
• /
• 1987

When barium titanate was synthesized in soild-solid reaction the abnormal expansion occurred from 900$^{\circ}C$ to 1100$^{\circ}C$. The equi-molecular mixture of BaCO3 and TiO2 was sintered from 800$^{\circ}C$ to 1300$^{\circ}C$ on the condition of air, vacuum and CO2 atmosphere. After that the specimens were tested closely with XRD, Dilatometer, SEM and EDS. The result indicated that; 1. The crystal phase which was concerned with expansion of BaTiO3 was Ba2TiO4 as the intermediate crystal phase. 2. The formation of Ba2TiO4 was affected by the firing atmosphere. 3. The expansion occurred when BaTiO3 changed to Ba2TiO4 and pore also expanded by the expansion of BaTiO3 body just as the model of expansion.

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.75-85
• /
• 2020

Objective: The aim of this study was to evaluate changes in the nasal soft tissues, including movements of landmarks, changes in linear distances, and volumetric changes, using three-dimensional (3D) stereophotogrammetry after microimplant-assisted rapid palatal expansion (MARPE) in adult patients. Methods: Facial data were scanned using a white light scanner before and after MARPE in 30 patients. In total, 7 mm of expansion was achieved over a 4-week expansion period. We determined 10 soft tissue landmarks using reverse engineering software and measured 3D vector changes at those points. In addition, we calculated the distances between points to determine changes in the width of the nasal soft tissues. The volumetric change in the nose was also measured. Results: All landmarks except pronasale and subnasale showed statistically significant movement on the x-axis. Pronasale, subnasale, alar right, and alar left showed significant movement on the y-axis, while all landmarks except subnasale showed significant movement on the z-axis. The alar base width, alar width, and alar curvature width increased by 1.214, 0.932, and 0.987 mm, respectively. The average volumetric change was 993.33 ㎣, and the amount of increase relative to the average initial volume was 2.96%. Conclusions: The majority of soft tissue landmarks around the nasal region show significant positional changes after MARPE in adults. The nose tends to widen and move forward and downward. The post-treatment nasal volume may also exhibit a significant increase relative to the initial volume. Clinicians should thoroughly explain the anticipated changes to patients before MARPE initiation.

• Korean Journal of Materials Research
• /
• v.19 no.12
• /
• pp.644-648
• /
• 2009

Temperature dependency of resistivity of the carbon black-polyethylene composites below and above percolation threshold is studied based on the electrical conduction mechanism. Temperature coefficient of resistance of the composites below percolation threshold changed from minus to plus, increasing volume fraction of carbon black; this trend decreased with increasing volume fraction of carbon black. The temperature dependence of resistivity of the composites below percolation threshold can be explained with a tunneling conduction model by incorporating the effect of thermal expansion of the composites into a tunneling gap. Temperature coefficient of resistance of the composites above percolation threshold was positive and its absolute value increased with increasing volume fraction of carbon black. By assuming that the electrical conduction through percolating paths is a thermally activated process and by incorporating the effect of thermal expansion into the volume fraction of carbon black, the temperature dependency of the resistivity above percolation threshold has been well explained without violating the universal law of conductivity. The apparent activation energy is estimated to be 0.14 eV.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.155-171
• /
• 2007

Exaggerated expressions of contemporary fashion have exceeded historical precedents in volume. The purpose of this study is to understand the aesthetic characteristics of expanded form In contemporary fashion. To take dresses beyond their flat shapes into three-dimensional forms, it was investigated into volume of dresses by using the void and the mass. The void Is rarefied space and the mass is densified space. The void of dresses could be constructed from the boning such as panier and stiff textiles as organza lining. The mass could be constructed from padding. Fold, pleats, twist, and the layering of fabrics show features of both the void and the mass. Contemporary fashion designers relied on the void rather that the mass to make the enormous volume because of the weight of the mass. X-silhouette and the expansion of skirt and sleeve were dominant as the result of accentuating the body with a waistline. However, many of expanded dresses were so voluminous that they obscured the body's outlines. Some forms were strange and shocking. Many designers explored the void and there were a multitude of methods to construct the void: compartments of air, architectural techniques, technical textiles, fold such at origami. The aesthetic consciousness of expanded dresses could be classified into 7 categories, the giant, the dynamic, the deconstructive, the historical, the comedic, the rhythmical, and the technical character.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.2
• /
• pp.119-125
• /
• 2013

In this paper, semiconducting shield specimens for a DC cable is fabricated and characterized by measurement of volume resistance, tensile strength, and the coefficient of expansion to show the electrical and mechanical characteristics of the semiconducting shield. Due to the PTC phenomenon, the volume resistance at $25^{\circ}C$ increases rapidly in comparison to the volume resistance at $90^{\circ}C$. Since the compounding ratio of carbon black is low, the tensile strength and density become lower and the coefficient of expansion is increased. As the general specification of the tensile strength and density is $0.8kgf/mm^2$ and 150%, respectively, the fabricated specimen in this paper has excellent mechanical characteristic.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.153-156
• /
• 2001

The transformer and the OF cable are cooled and insulated by insulating oils in their body. The insulating oil expands or contracts with the heat transfer according to the operating conditions of the electric facilities. So we install the $N_2$ gas tank connected with the insulating oil system to overcome the change. The change of the insulating oil volume for the operation temperature range must be calculated to decide the $N_2$ gas volume and to set the alarm point for safe operation. It is known that this change is proportional to the temperature change and to the insulating oil volume if the temperature change is small enough.[1][11] However this proportional formula has been accepted generally in the design of electric facilities for wide operation temperature range such as $40^{\circ}C{\sim}125^{\circ}C$. Hence, it makes large errors in calculation which car result in serious damage against safe operation of the electric facilities. This paper presents a improved method of calculating the accurate change of the insulating oil volume to insure the safe operation of electric facilities.

• Journal of Korean Society on Water Environment
• /
• v.29 no.6
• /
• pp.754-761
• /
• 2013

Urban floods are usually caused by the lack of drainage capacity. Hence, sewer capacity expansion methodology by replacing small pipes with bigger ones is primarily applied as a flood control measure. However, this approach is often unreasonable because of the costs and time involved. Thus, the installation of underground rainwater storage tanks with the two advantages of flood control and water conservation is proposed. This study compared the effectiveness of flood control by both the sewer expansion methodology and rainwater storage tanks using the Storm Water Management Model. Three cases were simulated in this study. The first case analyzed flood reduction by the storm sewer expansion methodology. The simulation results indicate that the overflow volume from manholes was reduced by 49% with this methodology. The second case analyzed flood reduction by installation of rainwater storage tanks. The simulation results indicate that the overflow volume was reduced by 62%. However, these two cases could not prevent urban floods completely. Hence, the third case analyzed the joint application of the storm sewer expansion methodology and rainwater storage tanks. In this simulation, flooding did not occur. Consequently, the results of this study clearly show that underground rainwater storage tanks are more effective for flood control than capacity expansion of storm sewer. Furthermore, the joint application of these two flood control measures is more effective than their separate application.

• The Korean Journal of Physiology
• /
• v.23 no.2
• /
• pp.253-261
• /
• 1989

Responses of atrial natriuretic peptide (ANP), aldosterone and renin release to acute volume expansion were compared in normotensive Wistar and spontaneously hypertensive rat (SHR) fed low or high-sodium diet (2 or 25 mmol Na/100 g diet). Experimental diets were fed for 6 weeks from 7-week-old and the growth rate was similar in all groups. In the morning of the experiment, catheters were inserted under ether anesthesia in femoral artery for pressure recording and blood collection, femoral vein for saline infusion, and bladder for urine collection. Then, the rats were placed in restraining cages. When the rats were recovered from anesthesia and the arterial pressure became stabilized, control urine and blood samples were collected. Then, 0.9% saline was infused for 30 min for volume expansion (3% BW). Arterial pressure was significantly higher in the high-sodium SHR but there was no difference between the two groups of Wistar rats. Control plasma levels of Na, K, ANP, renin activity, and hematocrit were not different among the 4 groups. However, plasma aldosterone level was significantly higher in the low-sodium groups. Wistar low-sodium rats showed approximately two times higher plasma aldosterone level than the SHR counterpart. Volume expansion produced a marked increase in plasma ANP level, especially in the high-sodium groups. The low-sodium groups of both strains showed approximately two-fold increase in plasma ANP level. Following a volume expansion plasma aldosterone level and renin activity decreased in all groups. There was a significant logarithmic positive correlation between plasma renin activity and aldosterone concentration. The low-sodium rats produced a greater increase in aldosterone release by small increase in plasma renin than did the high-sodium rats. The low- and high-sodium rats produced a similar degree of diuresis and natriuresis after volume expansion. However, SHR produced a greater natriuresis than did the Wistar rats. The above results indicate that regulatory mechanisms of ANP, aldosterone and renin release are different between the normotensive and hypertensive rats, and between the low- and high-sodium groups.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.693-697
• /
• 2010

Biomass expansion factors that convert the timber volume (or dry weight) to biomass are used to estimate the forest biomass and account for the carbon budget on a national and regional scale. This study estimated the biomass conversion and expansion factors (BCEF), root to shoot ratio (R), biomass expansion factors (BEF) and ecosystem biomass expansion factor (EBEF) of Korean pine (Pinus koraiensis) forests based on direct field surveys and publications in Korea. The mean BCEF, BEF, and R was 0.6438 Mg $m^{-3}$ (n = 7, SD = 0.1286), 1.6380 (n = 27, SD = 0.1830), and 0.2653 (n = 14, SD = 0.0698), respectively. The mean EBEF, which is a simple method for estimating the understory biomass in Korean pine forest ecosystems, was 1.0218 (n = 6, SD = 0.0090). The values of the biomass expansion factors in this study estimated the Korean pine forest biomass with more precision than the default values given by the IPCC (2003, 2006).