• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.689-694
• /
• 2006

Most of design parameters of Railway Structures are determined by the serviceability requirements, rather than the structural safety requirements. The serviceability requirements come from Ensuring of running safety and ride comfort of train, reduction of track maintenance working Track-Bridge interaction should be considered in the design of railway structures. In this study, a numerical method which precisely evaluate an axial force of rail and a rail expansion and contraction when turnout exist in succession on a CWR of bridge is developed.

• Journal of Sasang Constitutional Medicine
• /
• v.5 no.1
• /
• pp.157-173
• /
• 1993

In order to investigate experimentally the clinical effects of Soeuminsohaphyangwon that was prescribed to cure the Wisunanrihanbyung of Soeum-In, the author experimented various activities of mixed extract from the Soeuminsohaphyangwon by the method prescribed in the experimental part. The results of the studies were summerized as follows : 1. Suppressive action was not shown on the convulsion induced by strychnine but significant effect was noted on the convulsion induced by picrotoxin and caffeine. 2. In acetic acid method experiment analgesic effect was noted. 3. A prolongation of anesthetic time by Pentobarbital sodium and antipyretic effect was observed. 4. Relaxing action was noted on the ileums of mice, also same effect was recognized on contraction of the ileums due to acetylcholine, barium chloride and histamine 2 HCl. 5. The expansion of blood vessels by relaxation of smooth muscle and fall of blood pressure were noted. According to the above results, effects based on oriental medical references were approximate to the actual experimental results.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.1-8
• /
• 2002

A numerical analysis was performed on the fluid flow in injector orifice of a liquid rocket engine. The present computational code was verified against the published data for turbulent flow in a pipe with a sudden expansion-contraction. Considered were the parameters for the flow analysis in an injector orifice: Reynolds number, ratio of mass flow rate of the injector orifice and inlet flow rate, and slant angle of the injector orifice. The discharge coefficient increased slightly as the Reynolds number increased. The slant angle of the injector changed critically the discharge coefficient. The discharge coefficient increased by 7% when the slant angle changed from $-30^{\circ}$ to $30^{\circ}$ The ratio of mass flow rate had relatively little impact on the discharge coefficient.

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.19-28
• /
• 2002

The Nelder-Mead simplex algorithm has been one of the most widely used methods for the nonlinear unconstrained optimization, since 1965. Recently, the new algorithm, (so-called the Fuzzy Simplex Algorithm), with fuzzy logic controllers for the expansion, reflection and contraction process of this algorithm has been proposed. In this paper, this new algorithm is developed. And, the formulation for the optimum design of the power screw's efficiency is made. And then, the developed fuzzy simplex algorithm as well as the original one is applied to this optimum design problem. The Fuzzy simplex algorithm results in a faster convergence in this problem, as reported in other study, too.

• Journal of Power System Engineering
• /
• v.13 no.6
• /
• pp.35-42
• /
• 2009

The piping systems in the steam-driven power engines lie under the cyclic condition of thermal expansion and contraction by superheated steam. These phenomena might cause some severe damages on the pipes and the accessory devices. To avoid these damages, the calculation of the proper strength and the consideration of the reduced resultant forces on the materials are needed. In the present study, numerical investigations on the effects of the thermal deformation of the industrial piping system were performed with comparison of the design data. Commercial software, ABAQUS with the thermal-fluidic loadings based on the design conditions was used for the thermal stress analysis of the piping system. From the analysis of the initially-designed pipe supporters, the rearrangement was suggested to improve the piping design.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.177-182
• /
• 2007

In this paper, automotive hydraulic pipeline systems are modeled in which a straight blocked pipe, two pipes with sudden expansion or contraction are connected in series and terminated with a chamber. The frequency response characteristics of these composite pipeline systems are investigated experimentally. The theoretical analysis for various pipe configurations is base on transfer matrix method with frequency dependent viscous friction distributed parameter pipeline model. The gain and phase of transfer functions are included for comparison with experimental results. There is close agreement between the results of experimental and theoretical determination of pressure response in automotive hydraulic pipeline systems.

• 한국가스학회:학술대회논문집
• /
• 2003.10a
• /
• pp.85-90
• /
• 2003

Korea Gas Corp. has developed the design technology of the LNG storage tank. The membrane to be applied inside of LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature. We constructed strain measurement system by using strain gage. In this paper, some problems which should be considered when measuring strain at $-162^{\circ}C$, are discussed by presenting test results on the characteristics of strain gages, Temperature sensor, adhesive and lead wire. And presenting the procedure of the constructing strain measurement system.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.459-462
• /
• 2006

In this study, the characteristic of a vane pump of an automative power steering system is numerically analyzed. The vane pump changes the energy level of operation fluid by converting mechanical input power to hydraulic output. To simulate this mechanism, moving mesh technique is adopted. As a result, the flow rate and pressure are obtained by numerical analysis. The flow rate agrees well with the experimental data. Moreover, the variation and oscillation of the pressure around the rotating vane are confirmed. The difference of pressure appears in the vane tip as a result of the flow characteristics. Furthermore, the back flow into the rotor was observed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.96-103
• /
• 2005

One of the major problems limiting the accuracy of piezoelectric transducers fur cylinder pressure measurements in an internal combustion (IC) engine is the thermal shock. Thermal shock is generated from the temperature variation during the cycle. This temperature variation results in contraction and expansion of the diaphragm and consequently changes the force acting on the quartz in the pressure transducer An empirical equation for compensation of the thermal shock error was derived from consideration of the diaphragm thermal deformation and actual pressure data. The result indicate that the thermal shock equation provides reliable correction based on known surface temperature swing.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2699-2702
• /
• 2012

Gold-polypyrrole segment nanowires prepared using anodized aluminum oxide templates can be assembled into a curved superstructure that shows stimuli-induced contraction and expansion. The radius of the superstructures can be predicted using the simple equation suggested by J. K. Lim et al. (Nano Lett. 8, 4441 (2008)). The suggested equation, however, is valid only within the limiting condition in that the length of the polypyrrole segment is comparable to, or much longer than the gold segment. In this study, the original equation was modified to a new equation that is valid for all length scales of polypyrrole segments. The radius of the superstructures calculated using the modified equation was compared with the result calculated by the original equation, and the validity of the modified equation is discussed.