• 한국해양공학회지
• /
• 제16권2호
• /
• pp.27-31
• /
• 2002

The purpose of this study is to investigate the variation of resonance that is possible caused by construction of new port in a practical sea area between the existing port and the new one. The research of amplification that of the sea area was accomplished for the variation of resonance. In this study, long period wave that is observed continuously in the practical sea area was analyzed, and then secondary undulation was reproduced by numerical analysis. As a result of numerical analysis, the first mode resonant periods in the existing port is 640sec, and in the new one is 500sec. On the other hand, we know there is long period wave of 500sec from analyzation of field datas. Because that period this period is the resonant period in the new port. There is also the possibility of secondary undulation cause of resonant.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권11호
• /
• pp.498-504
• /
• 2006

This paper describes the simple payback period analysis of small co-generation system based on the existing apartment and building data. First, We investigate apartment and building data more than $2000[m^2]$ using Ministry of Construction & Transportation's computer system. And then we calculate the latent amount of small co-generation system considering gas company and CHP. Second, we classify the latent amount of small co-generation system into office, hospital, hotel, department store, complex building and apartment. Finally, we perform the simple payback period analysis for small co-generation system. The results show the simple payback period of small co-generation system is less then 10 years.

• 건축역사연구
• /
• 제5권2호
• /
• pp.9-24
• /
• 1996

Owing to the energitic studies of the leading shcolars, some paradigmatic theories on the history of Korean dwellings have been suggested. They constructed periodization of their own and defined characteristics of each period with very limited historical materials. However the new historical materials have been discovered in the neighboring academic fields, which require to review the existing theories. This study aims at restructuring periodization in the history of Korean dwellings during the age of The prehistory and The ancient Kingdomes. Through the study, the existing theories on the same period are revived and evaluated based on the new materials. I suggest a new theory on the periodization and the characteristics of each period: a. the paleolithic period(6,000,000 B.P.-10,000 B.P.) : natural shelter, the emergence of man-made dwellings b. the neolithic period(10,000 B.P.-1,000 B.C.) : construction of pit house c. the bronze period(1,000 B.C.- 300 B.C.) : construction of semi-pit house d. the early metalic period(300 B.C. - 300 AD.) : construction of house on the ground level development of the Ondol system e. the ancient kingdomes period(300 AD - 700 AD): classification of housing type

• 한국안전학회지
• /
• 제27권5호
• /
• pp.158-163
• /
• 2012

This study is concerned with the estimation of wind speeds for return period in cellularized district of Busan by the recent meteorological data. Recently standard of the wind load in Busan area is determined by using meteorological wind speed data which is observed on Automated Synoptic Observing System(ASOS) only. Applying the existing basic wind speed that is 40m/s to the construction design of Busan area is inefficient. Because the wind speeds of Busan area show different amounts depend on the location of cellularized district. This research analyze the observed data of wind speeds of cellularized district in Busan based on Automate Weather System(AWA). In addition that we compute regional wind speeds for return period by using Gumbel distribution and study and compare with the existing basic wind speeds after evaluating appropriateness by Hazen's plot method.

• 한국산학기술학회논문지
• /
• 제20권10호
• /
• pp.47-53
• /
• 2019

본 연구는 기존 연구에서 초점을 맞춘 1기간 모형과는 달리 2기간 모형에서 위험회피성향의 증가에 따라 노력의 투입에 따라 손실의 크기와 발생확률이 동시에 감소하는 손실통제 노력의 변화를 살펴보고 있다. 노력의 투입과 손실의 발생시점간의 시점 분리를 고려한 본 연구의 가정은 장기에서 위험회피성향의 영향을 관찰할 수 있게 해준다. 그 결과 첫째, 손실함수 및 비용함수에 추가적인 제약이 존재했던 단기 모형인 기존 연구와는 달리 장기에서는 위험회피성향의 증가가 손실통제 노력의 증가를 가져왔다. 둘째, 손실통제 노력을 자가보험 노력 및 자가보호 노력으로 세분화해 볼 때, 위험회피성향의 증가가 자가보험 노력은 증가시키나 자가보호에 미치는 영향이 불분명하던 기존 단기모형의 결과와는 달리, 장기에서는 위험회피성향의 증가로 인해 자가보험 노력 및 자가보호 노력이 모두 증가한다는 것을 알 수 있다. 셋째, 평균이 0인 배경위험이 존재하는 경우 2기간 모형에서 위험회피성향의 증가에 따라 손실통제 노력이 증가할 충분조건은 효용함수가 신중성 조건을 나타내는 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.87-88
• /
• 2023

In accordance with changes in the domestic construction environment, interest in off-site construction methods (factory-manufactured construction methods) including modular construction methods is rapidly increasing. Among various off-site (OSC) construction methods, the front runner is the steel-based box-type modular construction method. Compared to the existing wet construction method, the steel modular construction method is increasing in terms of securing economic feasibility by shortening the construction period and increasing the prefabrication rate. However, due to the recent rise in raw materials and a sharp rise in the exchange rate, the economic feasibility of the wet method is deteriorating compared to the wet method. Therefore, a hybrid between 9-Matrix-based OSC construction methods is considered as a solution, away from the steel-box type combination, and a comparative study of the construction process between each construction method is being conducted. It was analyzed that the PC modular construction method shortened the construction period by 9% compared to the existing steel modular construction method. On the other hand, when comparing the construction period of the Gayang-dong demonstration complex calculated assuming that all modules are applied, it is estimated that there will be a 12% reduction in construction period compared to the steel modular method and a whopping 43% compared to the RC method.

• 한국해안해양공학회지
• /
• 제14권1호
• /
• pp.34-40
• /
• 2002

본 연구에서는 해안선 부근의 장주기파가 해안침식과 관련이 있음에 주목하며 심해파의 특성으로부터 천해역의 장주기파의 파고를 추정하기 위해 파고계 3대를 해안으로부터 외해방향의 해안종단 방향으로 일직선상에 배치하여 현장관측을 실시하고 그 결과를 분석하였다. 아울러, 장주기파의 발생기구에 관한 기존의 이론을 현장관측을 통해 검증하고, 장주기파의 발생기구를 토대로 심해파 제원과 천해역의 장주기 파고와의 관계를 검토하였다. 관측된 장주기파는 기존의 이론과 대체적으로 일치하였으며, 심해파와 장주기파 사이에는 선형적인 대응이있음을 확인하였다. 또한, 장주기파의 공간적·시간적 변화를 추가하기 위하여 각 지점별로 관측된 장주기파를 합성함으로서 장주기파의 파고를 계산하였다. 그 결과, 장주기파와 심해파 사이의 관계는 더욱 뚜렷한 경향을 나타내었으며, 양자로부터 장주기파의 추정식을 도출할 수 있었다. 따라서, 이를 이용함으로서 해당지역의 천해역에 존재하는 장주기파랑의 규모가 심해파랑의 자료로부터 예견될 수 있을 것으로 사료된다.

• 국제초고층학회논문집
• /
• 제5권3호
• /
• pp.177-186
• /
• 2016

Along the subduction-zone of the western Japanese islands, large earthquakes are expected occur around the middle of this century, and long-period ground motions will reach major urban areas, shaking high-rise buildings violently. Since some old high-rise buildings were designed without considering long-period ground motions, reinforcing such buildings is an important issue. An effective method to reinforce existing high-rise buildings is installing additional dampers. However, a problem with ordinary dampers is that they require reinforcement of surrounding columns and girders to support large reaction forces generated during earthquake ground motion. To solve this problem, a deformation-dependent oil damper was developed. The most attractive feature of this damper is to reduce the damping force at the moment when the frame deformation comes close to its maximum value. Due to this feature, the reinforcement of columns, girders, and foundations are no longer required. The authors applied seismic retrofitting with a deformation-dependent oil damper to an existing 54-story office building (Shinjuku Center Building) located in Shinjuku ward, Tokyo, in 2009 to suppress vibration under the long period earthquake ground motions. The seismic responses were observed in the 2011 Tohoku Earthquake, and it is clarified that the damping ratio was higher and the response lower by 20% as compared to the building without dampers.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.381-388
• /
• 1999

The existing methods for installation of long steel pipe pile have some uneconomical problems such as increase of installation cost and period due to the welding of two piles and removal of soil plug, and decrease of driving efficiency due to the increase of driving resistance by time effect during the welding of piles and removal of soil plug, etc. Thus, in this study, new installation method for long steel pipe pile is suggested to work out the existing problems, and calibration chamber tests are peformed to investigate both driving and economical efficiency for the suggested method. The test results showed that the new installation method has increase bearing capacity as well as reduce installation cost and period for long steel pipe piles as compared with existing methods.

• Computers and Concrete
• /
• 제26권4호
• /
• pp.317-325
• /
• 2020

A precise estimation of the natural time period of buildings improves design quality, causes a significant reduction of the buildings' weight, and eventually leads to a cost-effective design. In this study, in order to optimise the reinforced concrete frames design, some symmetrical and unsymmetrical buildings composed of solid and hollow members have been simulated using finite element software SAP 2000. In numerical models, different parameters such as overturning moment, story drift, deflection, base reactions, and stiffness of the buildings were investigated and the results have been compared with strength and serviceability limit criteria proposed by Australian Standard (AS 3600 2018). Comparing the results of the numerical modelling with existing standards and performing a cost analysis proved the merits of hollow box sections compared to solid sections. Finally, based on numerical simulation results, two equations for natural time period of moment resisting reinforced concrete buildings have been presented. Both derived equations reflected higher degree of correlation and reliability with different complexities of building when compared with existing standards and relationships provided by other scholars. Therefore, these equations will assist practicing engineers to predict elastic behaivour of structures more precisely.