• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.540-549
• /
• 2010

The existing reliability evaluation models which have already developed by the corporations are so various because of using Maximum Likelihood Method. The existing models are very complicated owing to using system designing methods. Therefore, it is very difficult to utilize the existing models in business fields of many corporations. The purposes of this paper are as follows: The first purpose is to study the simple estimated Parameter to be easily utilized in the business fields of the corporations. The second purpose is to testify the simplification of the developed Parameter of estimated method by comparing the developed reliability evaluation model with the existing reliability evaluation models which are used in the business fields of the corporations.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.1
• /
• pp.77-87
• /
• 2009

In existing systems, the best method inhibiting corrosion control in water distribution systems is to reduce water corrosiveness. Water corrosion can be decreased by controlling water quality through simple water treatment in treatment plants. On this research, we study the characteristics of tab water qualities in domestic areas, assessment of corrosive water quality and the method of water quality monitoring. This review presents the method of water quality monitoring which is the most applicable. Monitoring for corrosion control in waterworks system is the most proper method; It can prevent serious accidents economically and reduce civil appeals. Surely we should assess corrosive water quality in tab water, and introduce water treatment methods to control corrosive water quality before monitoring for corrosion. According to a lot of researches, it has been proved that simple water treatments can reduce the pipe corrosion. In this review we should indicate that we do not control of the corrosive water quality due to domestic conditions, we should monitor the water quality basically. Therefore, we recognize how the existing water quality can cause problems on pipeline corrosion, how to deal with it. Then it will be possible to apply water quality monitoring for corrosion control in water distribution system. Monitoring for corrosion control can be expressed by LI index, it is already known in literatures. This review presents more simple method than existing methods than existing ones we expect to apply these methods to SCADA in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.875-885
• /
• 2010

CBR (Case-Based Reasoning) is a technique to infer the relationships between existing data and case data, and the method to calculate similarity and Euclidean distance is mostly frequently being used. However, since those methods compare all the existing and case data, it also has a demerit that it takes much time for data search and filtering. Therefore, to solve this problem, various researches have been conducted. This paper suggests the method of SE(Speed Euclidean-distance) calculation that utilizes the patterns discovered in the existing process of computing similarity and Euclidean distance. Because SE calculation applies the patterns and weight found during inputting new cases and enables fast data extraction and short operation time, it can enhance computing speed for temporal or spatial restrictions and eliminate unnecessary computing operation. Through this experiment, it has been found that the proposed method improves performance in various computer environments or processing rate more efficiently than the existing method that extracts data using similarity or Euclidean method does.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.5
• /
• pp.177-185
• /
• 2020

The building energy performance indicator, called Energy Performance Index (EPI), has been used for the past decades in South Korea. It has a list of design variables assigned with weighting factors (a, b). Unfortunately, the current EPI method is not performance-based but very close to a prescriptive rating. With this in mind, this study aims to propose a new performance-based EPI method. For this purpose, a global sensitivity analysis method, Sobol, is employed. The Sobol method is suitable for complex nonlinear models and can decompose all the output variance due to every input. The Sobol sensitivity index of each variable is defined as 0 to 1 (0 to 100%), and the sum of all sensitivity indices is equal to 1 (100%). In this study, an office building was modeled using EnergyPlus and then the Latin Hypercube Sampling (LHS) was conducted to generate a surrogate model to EnergyPlus. The sensitivity index was suggested to replace weight (a) in the existing EPI. In addition, the discrete weight (b) in the existing EPI was replaced by a set of continuous regression functions. Due to the introduction of the sensitivity index and the continuous regression functions, the new proposed approach can provide far more accurate outcome than the existing EPI (R²: 0.83 vs. R²: 0.01 for cooling, R²: 0.66 vs. R²: 0.01 for total energy). The new proposed approach proves to be more rational, objective and performance-based than the existing EPI method.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.8
• /
• pp.59-66
• /
• 2010

In this study, an applicability by using the FEM was investigated for the prediction of both the depth of improvement and the vibration effect when dynamic compaction method is applied. The region was modelled by the field conditions applying dynamic compaction method and the rigid body force was applied to the dynamic load model. Predicted depth of improvement calculated by the vertical peak particle acceleration was compared and analyzed with an existing empirical equation, and the effect of groundwave by deducing the peak particle velocity from vibration sources was compared and analyzed with the results of another existing empirical equation. The results showed that the prediction of the depth of improvement has similar tendency to practice, and the vibration effect has some differences in a particular section from existing equation, but it could predict the safety distance to some degree. The analyzed results are expected to be basic data for the development of reliability of dynamic compaction design with existing empirical method.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.49-57
• /
• 2020

In comparison with the existing static reliability analysis methods, the dynamic reliability analysis(DyRA) method is more suitable for estimating the failure probability of a structure subjected to earthquake excitations because it can take into account the frequency characteristics and damping capacity of the structure. However, the DyRA is known to have an issue of numerical stability due to the uncertainty in random sampling of the earthquake excitations. In order to solve this numerical stability issue in the DyRA approach, this study proposed two earthquake-scale factors. The first factor is defined as the ratio of the first earthquake excitation over the maximum value of the remaining excitations, and the second factor is defined as the condition number of the matrix consisting of the earthquake excitations. Then, we have performed parametric studies of two factors on numerical stability of the DyRA method. In illustrative example, it was clearly confirmed that the two factors can be used to verify the numerical stability of the proposed DyRA method. However, there exists a difference between the two factors. The first factor showed some overlapping region between the stable results and the unstable results so that it requires some additional reliability analysis to guarantee the stability of the DyRA method. On the contrary, the second factor clearly distinguished the stable and unstable results of the DyRA method without any overlapping region. Therefore, the second factor can be said to be better than the first factor as the criterion to determine whether or not the proposed DyRA method guarantees its numerical stability. In addition, the accuracy of the numerical analysis results of the proposed DyRA has been verified in comparison with those of the existing first-order reliability method(FORM), Monte Carlo simulation(MCS) method and subset simulation method(SSM). The comparative results confirmed that the proposed DyRA method can provide accurate and reliable estimation of the structural failure probability while maintaining the superior numerical efficiency over the existing methods.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.4 no.1
• /
• pp.11-19
• /
• 2008

Groundwater flow in confined aquifer and heat transport in underground geologic media are using same governing equation(line source) like well fuction. Therefore the conventional slope method using only later data obtained from in-situ thermal response test to determine the thermal conductivity of vertical geothermal heat exchanger(GHEX) is basically identical with one of Theis straight line method of aquifer test under artesian condition. In case that the pumping rate(Q, $m^3$/d) and drawdown(s,m) which are used for input data of existing hydrogeologic computer programs for aquifer test are replaced and converted to supplying heat energy per unit length of bore hole(Q/L,w/m or Kcal/h.m) and temperatures (T,$^{\circ}C$)measured at in and out-let of GHEX as in put data respectively, thermal conductivity around geothermal heat exchanger can be easily estimated without any special modification of the existing hydrogeologic computer program. Two numbers of time series temperature variation data obtained from in situ geothermal response test are analized using Theismethods(standard curve and straight line method) by using existing aquifer test program and conventional Slope method proposed by ASHRAE. The results show that thermal conductivity values estimated by two straight methods are identical and the difference of estimated values between standard curve methods and Slope method are also within acceptable ranges. In general,the thermal conductivity estimated from Theis straight linemethod gives more accurate value than the one of Slope method due to that Slope method uses only visual matching otherwise Theis method uses automatic curve matching estimation with reducing RSS.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.6
• /
• pp.1458-1467
• /
• 1999

Existing index structures such as extendable hashing and B+-tree do not support partial string searches perfectly. The inverted file method and the signature file method that are used in the web retrieval engine also have problems that they do not provide partial string searches and suffer from serious retrieval performance degradation respectively. In this paper, we propose an efficient index method that supports partial string searches and achieves good retrieval performance. The proposed index method is based on the Inverted file structure. It constructs the index file with patterns that result from dividing terms by two syllables to support partial string searches. We analyze the characteristics of our proposed method through simulation experiments using wide range of parameter values. We analyze the derive analytic performance evaluation models of the existing inverted file method, signature file method and the proposed index method in terms of retrieval time and storage overhead. We show through performance comparison based on analytic models that the proposed method significantly improves retrieval performance over the existing method.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.144-156
• /
• 2010

When existing parts are re-used for the development of a new product or business-to-business transactions, a method for searching parts from a part database that meets user's requirements is necessary. To this end, it is important to develop a part search method which is able to measure similarity between parts and user's input data with generality as well as robustness. In this paper, the authors suggest a method for measuring part similarity using ontology and multi-criteria decision making method and address its technical details. The proposed method ensures the interoperability with existing engineering information management systems, represents part specifications systematically, and has generality in the procedure for comparing part specifications. The case study for ejector pins having been conducted to demonstrate the proposed method is also discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.42-49
• /
• 2003

OFDM should be used for the fourth generation communication for high speed communication. Because of high spectral efficiency and high tolerance to fading channel, OFDM is applied to many high speed wire and wireless communication such as DAB (Digital Audio Broadcast), DVB(Digital Video Broadcast), IMT 2000 etc. Inter-modulation, however, is derived from PAR(Peak to Average Power Ratio) of OFDM signals. The paper describes PTS(Partial Transmit Sequence) and SLM(Select Mapping) of an existing methods which can reduce PAR. And then this papers proposed the new method that is called "Combine method". The method proposed in this paper is to combine PTS and SLM. As a result of the simulation, Combine PAR method is better than the existing methods.