• 제목/요약/키워드: existence of solution

검색결과 937건 처리시간 0.031초

펄스 레이저 증착법으로 제작된 다강체 $0.7BiFeO_3-0.3BaTiO_3$ 박막의 특성 연구 (Preparation and Characterization of Multiferroic $0.7BiFeO_3-0.3BaTiO_3$ Thin Films by Pulsed Laser Deposition)

  • 김경만;;;조영걸;이희영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.88-88
    • /
    • 2009
  • $BiFeO_3$(BFO), when forming a solid solution with $BaTiO_3$(BTO), shows structural transformations over the entire compositional range, which not only gives a way to increase structural stability and electrical resistivity but also applies a means to have better ferromagnetic ordering. In this respect, we have prepared and studied 0.7BFO-0.3BTO thin films on $Pt(111)/TiO_2/SiO_2/Si$ substrates by pulsed laser deposition. Various deposition parameters, such as deposition temperature and oxygen pressure, have been optimized to get better quality films. Based on the X-ray diffraction results, thin films were successfully deposited at the temperature of $600^{\circ}C$ and an oxygen partial pressure of 10mTorr. The dielectric, ferroelectric, and magnetic properties have then been characterized. It was found that the films deposited under lower oxygen pressure corresponded to lower leakage current. Magnetism measurement showed an induced ferromagnetism. The microstructures associated with. the magnetic and dielectric properties of this mixed-perovskite solid solutions were observed by transmission electron. microscopy, which revealed the existence of complicated ferroelectric domains, suggested that the weak spontaneous magnetization was closely associated with the decrease in the extent of rhombohedral distortion by a partial substitution of $BaTiO_3$ for $BiFeO_3$.

  • PDF

반복과전류에 의한 퓨즈 엘리먼트의 용단특성에 관한 연구 (A Study on the melting Characteristics of Fuse Element by Repeating Overcurrent)

  • 김윤현
    • 조명전기설비학회논문지
    • /
    • 제24권2호
    • /
    • pp.120-126
    • /
    • 2010
  • 본 논문은 고압용 전류제한 퓨즈의 열화 요인으로 작용되는 반복과전류에 의한 퓨즈 엘리먼트의 용단특성을 시험을 통하여 분석 및 규명하였다. 반복과전류에 의한 열화 진행 속도를 규명하기 위하여 엘리먼트노칭 형상별 열 해석을 수행하였으며 판형, 환형의 다양한 시험용 엘리먼트의 형상을 설계, 제작하여 이를 기중상태 및 규사충전상태의 소호제 유무에서 부하율을 조정하여 반복과전류 시험을 통한 용단특성을 분석, 수명과의 관계를 예측할 수 있는 자료를 제시하였다. 본 논문의 시험을 통하여 반복과전류에 의한 소호제와의 마찰로 퓨즈 엘리먼트의 변형 및 단면의 감소와 반복응력으로 인한 균열이 발생하여 퓨즈 반복 횟수에 따른 수명을 단축시키는 문제점의 도출과 엘리먼트 노칭 형상에 따라서 용단 특성이 차이가 있음을 알 수 있었다. 본 논문의 결과물은 재료의 마찰과 반복 전류의 부하율에 따른 반복 수명과의 상관관계에 관한 내용으로 고압용 전류제한 퓨즈의 성능 향상 개선을 위한 설계 시 중요한 기초 자료로 활용되리라 기대된다.

무균 로티퍼 Brachionus rotundiformis의 증식 (Growth of Axenic Rotifer Brachionus rotundiformis)

  • 정민민;노섬;김필연
    • 한국양식학회지
    • /
    • 제11권1호
    • /
    • pp.91-97
    • /
    • 1998
  • 이 연구에서는 해산어의 종묘 생산에 필요한 대량 배양용 로티퍼, Brachionus rotundiformis의 종 보존 방법으로서 무균 로티퍼의 이용을 검토했다. 로티퍼는 개량형 항생제 혼합액 AM9을 사용하여 무균 처리한후, 무균 Nannochloropsis oculata를 먹이로 공급하여 연속 유지 배양했다. 각각 다른 시기의 3회 (trial 1, 2 and 3)에 걸친 로티퍼 배양결과, 무균 배양 (axenic culture)에서는 비교적 안정적인 증식을 보인 반면, 유균 배양 (non-axenic culture)에서 로티퍼의 증식은 불안정적으로 각 시기에 따라서 심한 증식의 차이가 관찰되었다. 이 결과는 유균 배양에서 로티퍼의 증식에 직접적으로 악영향을 미치는 박테리아가 무균 처리과정을 통해서 제거되었음을 증명한다. 로티퍼 무균 배양 방법의 일반화 또는 대량 배양용 로티퍼의 씨앗으로서의 무균 로티퍼의 이용은 로티퍼의 안정 배양은 물론 유용 수산 생물의 대량 폐사를 일으키는 원인 생물을 사전에 제거할 수 있는 유효한 방법이 될 수 있다고 생각된다.

  • PDF

PREPARATION AND CHARACTERIZATION OF MULTIFERROIC 0.8 $BiFeO_3$-0.2 $BaTiO_3$ THIN FIMLS BY PULSED LASER DEPOSITION

  • ;;;이희영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.313-313
    • /
    • 2010
  • $BiFeO_3$ (BFO), when forming a solid solution with $BaTiO_3$ (BTO), shows structural transformations over the entire compositional range, which not only gives a way to increase structural stability and electrical resistivity but also applies a means to have better ferromagnetic ordering. In this respect, we have prepared and studied 0.8 BFO-0.2 BTO thin films on Pt(111)/$TiO_2/SiO_2$/Si substrates by pulsed laser deposition. Various deposition parameters, such as deposition temperature and oxygen pressure, have been optimized to get better quality films. Based on the X-ray diffraction results, thin films were successfully deposited at the temperature of $700^{\circ}C$ and an oxygen partial pressure of 10mTorr and 330mTorr. The dielectric, ferroelectric, and magnetic properties have then been characterized. It was found that the films deposited under lower and higher oxygen pressure corresponded to lower leakage current. Magnetism measurement showed an induced ferromagnetism. The microstructures associated with the magnetic and dielectric properties of this mixed-perovskite solid solutions were observed by transmission electron microscopy, which revealed the existence of complicated ferroelectric domains, suggested that the weak spontaneous magnetization was closely associated with the decrease in the extent of rhombohedral distortion by a partial substitution of $BaTiO_3$ for $BiFeO_3$.

  • PDF

UV-감응형 에폭시 마스크를 사용한 균일한 분포의 터널형 알루미늄 에치 피트 형성 연구 (Formation of Aluminum Etch Tunnel Pits with Uniform Distribution Using UV-curable Epoxy Mask)

  • 박창현;유현석;이준수;김경민;김영민;최진섭;탁용석
    • 공업화학
    • /
    • 제24권5호
    • /
    • pp.562-565
    • /
    • 2013
  • 고순도의 알루미늄 호일은 전기화학적 에칭을 통해 표면적을 증가시킨 후 전해 커패시터의 양극으로 사용된다. 그러나 산화 피막의 결함 및 에치 피트의 불규칙 생성에 의해 성장된 에치 피트의 분포는 불균일하며 이러한 불균일 형태는 알루미늄 넓은 표면적 분포에도 불구하고 여러 형태의 적용을 어렵게 만든다. 본 연구에서는 알루미늄의 선택적 에칭을 위해 포토리소그래피 방법으로 제작된 패턴 마스크를 사용하여 알루미늄 표면에 균일성을 갖는 보호층을 형성시켰다. 균일한 패턴을 갖는 알루미늄을 용액의 온도 및 전류밀도 등의 조건을 변경하여 실험하였고, 알루미늄 표면에 다양한 크기($2{\sim}5{\mu}m$)의 균일성을 갖는 에치 피트의 형성을 확인할 수 있었다.

변수 불확실성을 가지는 시스템에 대한 견실비약성 $H_{\infty}$ 칼만형필터 설계: PLMI 접근법 (Design of Robust and Non-fragile $H_{\infty}$ Kalman-type Filter for System with Parameter Uncertainties: PLMI Approach)

  • 김준기;양승협;방경호;박홍배
    • 전자공학회논문지
    • /
    • 제49권10호
    • /
    • pp.181-186
    • /
    • 2012
  • 본 논문에서는 변수 불확실성과 필터이득 섭동을 가지는 시스템에 대한 견실비약성 $H_{\infty}$ 칼만형필터 설계기법을 제안한다. 필터가 존재할 충분조건과 견실비약성 $H_{\infty}$ 필터 설계기법을 선형행렬부등식 (LMI: Linear Matrix Inequality 접근법으로 제안하고 시스템과 필터의 불확실성을 매개변수화 선형행렬부등식(PLMI: Parameterized Linear Matrix Inequality)으로 구조화된 불확실성의 형태로 표현한 후 Lyapunov 함수를 통해 시스템의 불확실성과 더불어 필터이득섭동을 고려한 칼만형 $H_{\infty}$ 필터가 존재할 충분조건과 필터설계기법을 PLMI 형태로 보인다. PLMI는 무한개의 LMI의 형태로 나타나므로 완화기법(relaxation technique)을 적용하여 유한개의 LMI의 형태로 변환한 후 견실하고 최적화된 필터이득과 필터섭동범위를 계산하고, 예제와 모의실험을 통해 제시된 필터의 타당성을 검증한다.

Cu/TaN CMP시 $H_2O_2$ 적정방법 (Titration methods of $H_2O_2$ in Cu/TaN CMP)

  • 유해영;김남훈;김상용;김태형;장의구
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
    • /
    • pp.38-41
    • /
    • 2004
  • The oxidizer plays an important role in the metal chemical mechanical polishing(CMP) slurry. Currently, the oxidizer used in CMP slurry is nearly divided into several kinds such as $Fe(NO_3)_3$, $H_2O_2$, $KIO_3$, and $H_5IO_6$. It is generally known that oxidizer character of $H_2O_2$ is more effective than other oxidizers. In this work, we have been studied the characteristics for the $H_2O_2$ concentration of copper slurry, which can applicable in the recent semiconductor manufacturing process. Also, it plays an important role in the planarization of copper films using copper slurries during micro-electronic device fabrication. In this work, we confirmed that removal rate of Cu/TaN changed by $H_2O_2$ concentration on copper slurry. And we used $KMnO_4$ in the measurement method of $H_2O_2$. In analysis results, we confirmed that the difference of results is large. We thought that the difference was due to organic component existence. So in titration method of $H_2O_2$ concentration, we used $Na_2S_2O_3$ instead of $KMnO_4$ as solution. Consequently, using the titration method, we could calculate correct data reduced error. And $H_2O_2$ concentration has been adjusted to the target concentration of 0.1 wt%.

  • PDF

ADR에서의 지적재산권분쟁 - 중재$\cdot$조정중심으로 - (ADR in IP Dispute)

  • 윤선희
    • 한국중재학회지:중재연구
    • /
    • 제13권1호
    • /
    • pp.125-167
    • /
    • 2003
  • ADR program is designed to solve the problem such as the increase of suits and decision delayed. ADR program has the several significances, decreasing inappropriate cost as time and burden of courts, providing an approachable measure of relief and more efficient tool for settlement of dispute. Particularly ADR program satisfies the needs Intellectual property disputes need specialists that are versed in the subjected problem and, need to be souled quickly in confidence. And parties concerned are not good at the strict judicial procedure in courts, At this point, ADR program holds some advantages over court proceeding for intellectual property disputes. Specialists can be selected as arbitrators or mediator; Cofidentiality may be preserved; Flexibility allows settlement based on mutual commercial interests; Single solution is possible for multiple disputes involving parties from different countries. However, ADR program has not been properly used in. Korea, which is due to not only the lack of understanding the ADR program, but the poor number of filings and settlements. Intermediaries are not professional and also they do not take active hands in disputes. Sometimes, their fairness is asked as peacemakers. Eventually, it is said that this program is not enough to settle international disputes. To activate the ADR program, we can propose the ADR program annexed to court for example. And we can introduce the conciliation and arbitration to disputes in intellectual property. Traditionally arbitration has been a crucial issue in intellectual property disputes. In that intellectual property rights are granted by the local sovereign power, many legal systems in the past maintained the position that the existence, extent, meaning and application of such rights could only be definitively decided by the granting authority or the courts of that country. There is wide recognition that the arbitration of intellectual property is desirable. The law in most of the major countries has been changed in recent years in favor of arbitrability of intellectual property rights. We can also propose ADR on-line.

  • PDF

파티클 스웜 최적화에서의 가중치 조절에 기반한 강인한 객체 추적 알고리즘 (Robust Object Tracking based on Weight Control in Particle Swarm Optimization)

  • 강규창;배창석
    • 한국차세대컴퓨팅학회논문지
    • /
    • 제14권6호
    • /
    • pp.15-29
    • /
    • 2018
  • 본 논문에서는 기존 파티클 스웜 최적화를 기반으로 추적 대상 객체의 이동 궤적을 이용하는 객체 추적기에서 시간 정보 활용의 문제점을 개선한 강인한 객체 추적 알고리즘을 제안한다. 제안하는 알고리즘은 추적 대상 객체와 유사한 특징을 가지는 변위들의 집합에 대한 위치들의 온라인 업데이트와 추적을 가능하게 한다. 객체들의 중첩을 검출하고 추적 대상의 위치를 결정하기 위해 궤적 정보와 변위들의 집합을 기반으로 적응적 파라미터를 사용하는 규칙기반 접근을 사용한다. 기존 알고리즘들과 비교해보면 제안하는 접근법은 가용한 정보를 복합적으로 사용함으로써 각종 임계값에 대한 적응적 조정을 가능하게 한다. 또한, 파티클 스웜 최적화에서 발산에 의한 손실과 불완전한 수렴의 문제를 해결하기 위해 효율적인 가중치 조절 함수를 제안하고 있다. 제안하는 가중치 조절 함수는 파티클들이 최적의 해에 수렴하기 이전에 전체 프레임 영역에서 탐색할 수 있도록 한다. 유사한 특징 조합을 가지는 다중 객체가 존재하는 환경에서 제안 알고리즘을 테스트한 결과, 기존 스웜 최적화 기반의 객체 추적기들에 비해 기존 유사 변위들에 대한 잘못된 추적을 현저히 줄이는 것을 확인할 수 있었다.

시추공간 레이다 측정에서 전자기 도파관 효과의 수치모델링 (Numerical modelling of electromagnetic waveguide effects on crosshole radar measurements)

  • 장한누리;박미경;김희준
    • 지구물리와물리탐사
    • /
    • 제10권1호
    • /
    • pp.69-76
    • /
    • 2007
  • 시추공 지중레이다 고주파수 전자기파 전파와 관련된 현상은 복잡하다. 그 물리적 과정을 보다 잘 이해하기 위해서 본 연구에서는 원통좌표계에서 맥스웰방정식의 유한차분 시간영역 해를 이용하였다. 이 방법은 시추공간 레이다탐사에서 전자기파의 전파형을 모델링할 수 있다. 그리고 원통좌표계는 계산 효율이 높고, 파동장의 3 차원적인 기하학적 확산을 정확하게 계산할 수 있으며 또 작은 크기의 시추공을 이산화할 때 효과적이다. 수치계산 결과를 통해 물로 채워진 시추공은 전파 파형에 영향을 주는 강한 도파관 효과를 일으킬 수 있으며, 그 도파관 효과는 시추공의 크기와 안테나의 길이에 의존한다.