• 전기학회논문지
• /
• 제58권4호
• /
• pp.795-800
• /
• 2009

Surface plasmon resonance (SPR) has been widely used for biological and chemical sensing applications. The present study investigates numerically the optical characteristics for the single Au film and bimetallic Ag/Au film SPR configurations by using the multiple beam interference matrix (MBIM) method. We use the prism coupling method, especially Kretschmann configuration for excitation of surface plasmon wave (SPW). The estimated results of reflectance, phase shift and magnetic field intensity enhancement factor are provided for finding out the optimum configuration with high sensitivity for SPR measurement. As a result, the optimum thicknesses are found to be 52 nm for a single Au film and 5 nm to 36 nm for bimetallic Ag-Au film. From the comparison of full width half maximum (FWHM) values for reflectance, phase shift, and enhancement of magnetic field intensity, it is concluded that the highest sensitivity can be obtained when using the phase shift for SPR sensor.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1483-1491
• /
• 2001

Enhancement of pulsed-laser ablation by an artificially deposited liquid film is presented. Measurements of ablation rate, ablation threshold, and surface topography arc performed. Correlation between material ablation and photoacoustic effect is examined by the optical beam deflection method. The dependence of ablation rate on liquid-film thickness and chemical composition is also examined. The results indicate that photomechanical effect in the phase explosion of liquid is responsible for the enhanced ablation. The low critical temperature of liquid induces explosive vaporization with localized photoacoustic excitation in the superheat limit and increases the ablation efficiency. Experiments were carried out utilizing a Q-swiched Nd:YAG laser at near-threshold laser fluences with negligible plasma effect (up to ∼100 MW/cm$^2$).

• Bulletin of the Korean Chemical Society
• /
• 제23권10호
• /
• pp.1456-1458
• /
• 2002

A simple, sensitive and selective determination method of oxalate has been investigated based on the fluorescence enhancement of $Eu^{3+}$-TTA complex due to the formation of $Eu^{3+}$-TTA-oxalate ternary complex. An emission peak of $Eu^{3+}$-TTA, which is increased linearly with addition of oxalate, occurs at 610 nm in aqueous solution with excitation at 306 nm. The linear range of the calibration curve is 1 ${\times}$$10^{-6}$-8 ${\times}$$10^{-6}$ M and the detection limit is 1 ${\times}$$10^{-6}$ M. The effects of foreign ions were studied. The present method was applied to determine oxalate of two synthetic samples.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1509-1512
• /
• 2008

Monomer and aggregate of $Bebq_2$ give fluorescence at 492 and 511 nm at 12 K, respectively. Intense T1 emission with vibronic structure was observed from $Bebq_2$ and $Alq_3$ below 70 K by heavily doping with phosphorescent $Ir(ppy)_3$. Energy transfer from $Ir(ppy)_3$ was clarified by photoluminescence excitation spectra.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2002년도 정기총회 및 학술대회
• /
• pp.183-186
• /
• 2002

본 논문에서는 신호의 마스킹 특성을 이용한 Inter-Band Smoothing 기법을 통한 음질 개선 연구를 하였다. 이것은 임계 대역 신호 처리 후 신호의 전체 신호 대 마스킹 비를 보상해 주는 방식으로, 각 대역의 여기(Excitation) 에너지로부터 근사화 시킨 전역 마스킹 임계치를 통한 보상 기법이다. 잡음 에너지 제어를 통한 음질 개선알고리즘을 이용한 실험 결과 보다 자연스러운 음질의 제공을 통해 MOS의 개선을 확인 할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• 제13권2E호
• /
• pp.68-75
• /
• 1994

신호처리의 많은 분야에서, 심하게 비가우시안 성질을 가지는 분포, 혹은 분포의 중간은 가우시안 특성을 가지지만 양 끝에서는 편차가 크게 나는 분포를 다루어야 하는 경우가 종종 있다. 이러한 편차에 효과적으로 대처하기 위하여 본 논문에서는 음성 신호의 여기 신호로서 혼합 분포(mixture distribution)을 고려한다. 이것은 음성 분석시 피치 주파수가 미치는 영향을 감소시키며, 배경 잡음을 제거하는 데에도 효과적이다. 음성 신호 파라미터의 추정 및 향상을 위하여 EM 알고리즘을 사용하묘, 향상 과정에서는 강인 칼만 필터링 기법을, 파라미터 추정 관정에서는 검출/추정 기법을 사용한다. 실험 결과, 본 논문에서 제안하는 알고리즘이 입력 신호대잡음비가 열악한 경우에 기존의 것보다 우수한 성능을 보인다.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.99-103
• /
• 2003

We studied the nonequilibrium superconductivity due to tunnel injection of polaronic quasiparticle (QP) from organic photoconductor. The transport properties of an organic copper (II) phthalocyanine (Cu -Pc)/d-wave superconductor were investigated in dark and under ultraviolet (UV) radiation for performance of a novel $high -T_{c}$ superconducting three terminal device. We observed that the injection of polaronic QP from the organic Cu -Pc film into the $Bi_2$S $r_2$$CaCuO_{8+{\delta}}$ film generated a substantially larger nonequilibrium effect as compared to the normal QP injection current. We could increase the current gain by UV excitation of the organic photoconductor injector. The tunneling spectroscopy of a Cu -Pc/BSCCO junction exhibited a small enhancement of the zero bias conductance peak under the W excitation. The above phenomena are of importance in developing optically controlled three terminal superconducting device.e.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.52-58
• /
• 2007

A cutting device capable of generating various shapes of the cyclic elliptical trajectory of a cutting tool was proposed and micro v-grooving experiments were performed to investigate the characteristics of elliptical vibration cutting (EVC). The proposed cutting device is comprised of a pair of parallel piezoelectric actuators with which harmonic voltages of varying phase difference and magnitude are supplied, creating various shapes of the elliptical tool path. The attributes of the elliptical locus involving the direction of the axis of an ellipse, the rotational direction and amplitudes of a trajectory were fine-tuned for stable operation of the EVC. The EVC characteristics performed with brass and copper revealed reduction in the cutting resistance and suppression of burr formation, resulting in the enhancement of form accuracy of machined micro-features. While the effect of the EVC increases with the increase of excitation frequency and the amplitude, it is found that a change in the cutting force decreases as the amplitude of an elliptical locus increases.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.757-763
• /
• 1998

The effect of {{{{ {Ga }^{3+ } }} addition on the photoluminescence and cathodoluminescence of {{{{ {SrTiO}_{3 } }}:{{{{ { Pr}^{3+ } }} was stu-died by performing the excitation emission and decay time measurements. Addition of {{{{ {Ga }^{3+ } }} in {{{{ {SrTiO}_{3 } }}:{{{{ { Pr}^{3+ } }} resulted in a considerable enhancement of {{{{ { Pr}^{3+ } }} emission intensity. From the analysis of the experimental results the following mechanism is proposed. Excitation in the {{{{ {SrTiO}_{3 } }} host lattice leads to the formation of electrons in the conduction band and holes in the valence band. The electrons in the conduction band re-combine radiatively with the holes trapped at {{{{ { Ga}^{3+ } }} and the energy is transferred to {{{{ { Pr}^{3+ } }} ion which give its own characteristic red emission.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.117-124
• /
• 2008

In early design stage, the simulation of interior noise is useful for the enhancement of the noise, vibration and harshness (NVH) performance in a vehicle. The traditional transfer path analysis (TPA) technology cannot simulate the interior noise since it uses the experimental method. In order to solve this problem, in this paper, the hybrid TPA is developed as the novel approach. The hybrid TPA uses the simulated excitation force as the input force, which excites the flexible body of a car at the mount point, while the traditional TPA uses the measured force. This simulated force is obtained by numerical analysis for the FE (finite element) model of a powertrain. The interior noise is predicted by multiplying the simulated force by the vibro-acoustic transfer function (VATF) of the vehicle. The VATF is the acoustic response in the compartment of a car to the input force at the mount point of the powertrain in the flexible car body. The trend of the predicted interior noise based on the hybrid TPA very well corresponds to the measured interior noise, although there is some difference due to not only the experimental error and the simulation error but also the effect of the air-borne path.