• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.735-736
• /
• 2008

There are many equipments for the Short Circuit Test, for example Short Circuit Generator, Induction Motor, Sequence Timer, CLR, Back Up Breaker, Making Switch and Excitation Equipment etc. Gradually an allowable tolerance of the short circuit test voltage is become smaller by the standards for short circuit test. The excitation equipment of short circuit generator is very important for test voltage is adjusted by the excitation equipment. Especially the excitation equipment must be possessed character of exactitude, durability and inalterability because some times around 10,000 times opening and closing short circuit test is requested by clint, which must be done within one minute. The purpose of this study for function and operation of the excitation equipment which rated DC voltage is 1,000V, rated DC current is 300A, rated out put is 30kW and type is YNEX 97S-441/609, is to help operation of short circuit generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.143-145
• /
• 2007

The development of excitation control system (ECS) for emergency diesel generator in nuclear power plant is the replacement project of existing control system to resolve the maintenance problems caused by aging and obsolescence, The excitation control system is classified as a safety-related system. To guarantee the performance of developing excitation control system is equal to or higher than that of other systems, establishing the quality assurance scheme, doing software verification and validation activities, and planning equipment qualification. In this paper, we'd like to introduce the equipment qualification of excitation control system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.120-127
• /
• 2000

This study is concerned with evaluating the effects of acoustic excitation on the development of two stream mixing layer generated by split plate. The ratios of two velocities U1 and U2 either side of the splitter plate were such that $U_1/U_2$=1.0 (uniform flow) or $U_1/U_2$<1.0(shear flow). The mixing layers were disturbed acoustically through the edge of split plate. Quantitative data were obtained with hot-wire anemometry. Flow visualization with smoke-wire was also employed for qualitative study. the results show that the large scale structures of mixing layers are strongly affected by excitation frequency and amplitude in both uniform and shear flows. The maximum streamwise and vertical turbulent intensities of the excited flow fields are apt to be decreased as compared with those of without excitation. The flow characteristics of uniform flow are more influenced by acoustic excitation than those of shear flow.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2024-2026
• /
• 1998

Many power plants built 20-30 years ago are facing problems associated with the excitation system used for controlling generator output voltage. After years of reliable operation, generation is experiencing increased down time due to maintenance associated with the exciting excitation equipment. Reliability of the excitation system has become an issue, especially where many of these generation plants may be critical to the internal processes used for manufacturing. Wear out mechanisms such as those associated with the wire wound rheostat the electromechanical voltage regulator, insulation failures of the rotating exciter and commutator deterioration have become real problems typical of many older installations. These are some of the issues that are affecting system reliability for older power plants. This paper will address typical problems associated with the old excitation systems and the justification for a replacement static excitation system used in many Paper Mills.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.70-75
• /
• 2014

TMR(triple modular redundant) digital excitation system with simulator is developed for tuning optimal control parameters during commissioning test and coping with system faults rapidly. A new system which mocks up virtual generator, turbine, grid can simulate as if excitation system is connected to a real generator system by setting four switches. The maintenance crew using the simulator is able to test perfectly the phase controller rectifiers, field breaker, sequence relays as well as TMR controller of the excitation system. Commissioning and performance results about the excitation system with simulator is discussed. The trial product was installed and operated at a 500MW thermal power plant after the commissioning test.

• 한국음향학회지
• /
• 제19권3호
• /
• pp.26-34
• /
• 2000

본 논문에서는 선형예측 잔여신호에 대한 하모닉 벡터 여기 코딩에, 시간 대역 분리 혼합 코딩을 결합한 4kbps 음성코더를 제안한다. 하모닉 벡터 여기 코딩은 유성음 구간에서 하모닉 여기 코딩을 사용하며, 무성음 구간에 대해서는 분석-합성 구조의 벡터 여기 코딩을 사용한다. 그러나, 이러한 양단 모드 코딩 방법은 유성음과 무성음이 혼재하는 전이 구간에서는 비효과적이므로, 유/무성음 모드 코딩 이외의 새로운 방법이 요구된다. 이에, 전이 구간을 위한 시간 분리 전이 코딩을 설계하였으며, 여기서, 유/무성음 결정 알고리즘은 단위 구간 내의 유성음과 무성음의 존속기간을 결정하고, 이전 구간의 유/무성음 결정에 따라 하모닉-하모닉 코딩과 벡터-하모닉 코딩을 선택적으로 사용한다. 복호화기에서는 하모닉 크기값들의 IFFT 과정을 통해 유성음 여기신호가 효과적으로 합성되며, 무성음 여기신호는 역 벡터 양자화를 통해 만들어진다. 재 복원된 음성 신호는 중첩합산 방법에 의해 합성된다.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.48-53
• /
• 2005

본 연구의 목적은 기계적인 전단층 자극방법을 이용 스월제트 혼합향상의 가능성을 고찰함에 있다. 이를 위해 기계적 자극장치가 설계, 제작되었다. 주요 구성품으로는 두개의 아음속 노즐, 스월 발생기, 그리고 유동 자극기 등이다. 실험은 다음과 같은 다양한 헬리컬 모드들에서 수행되었다; m=+0, m=$\pm$1, m=$\pm$2, m=$\pm$3, m=$\pm$4. 열선유속계를 이용한 plane 파동과 헬리컬 파동 자극에 따른 제트속도 측정이 이루어 졌다. 다양한 헬리컬 모드에서의 결과 값들이 기준 값(plane-wave)과 비교되었다. 획득된 결과는 3-D mesh plot 과 2-D contour plot으로 표현되었다. 이로써 새로 고안된 장치는 헬리컬 불안정파 자극에 대한 효과를 입증하였고 또한 결과적으로 스월제트의 혼합을 증진시켰다.

• 융합정보논문지
• /
• 제11권9호
• /
• pp.130-137
• /
• 2021

주파수를 갖는 외부 가진력에 의하여 강제 진동의 특성을 가진력의 진폭과 주파수에 따라 그 특성을 분석하였다. 변위, 속도 및 가속도를 얻기 위해 수치해석을 수행하여 주파수 응답을 얻었고 특히 주파수 영역에서 시스템 고유진동수와 가진 주파수의 발생 위치를 밝히고자 각각의 FRF의 분석을 하였다. 외부 가진에 의한 진동모델에서 변위, 속도 및 가속도의 거동과 주파수 응답함수에서 고유진동 주파수와 주변의 가진 모드 분포도 파워 스펙트럼과 실수부와 허수부의 FRF 에서 나타났으며 각 모드 특성도 구하였다. 진동의 응답은 가진 신호의 크기와 주파수를 주어 정현파의 가진력으로 외부 가진력을 근사화 하였고 이런 가진력에 의하여 발생하는 모드를 구별할 수 있었다. 상당 질량, 감쇠 및 강성을 변화시켜 수치 분석 후 외부 가진력에 의한 강제 진동 응답 특성을 체계적으로 분석하였다.

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1467-1474
• /
• 2004

In this study, a new damage identification method for beam-like structures with a fatigue crack is proposed. which does not require comparative measurement on an intact structure but require several measurements at different level of excitation forces on the cracked structure. The idea comes from the fact that dynamic behavior of a structure with a fatigue crack changes with the level of the excitation force. The 2$^{nd}$ spatial derivatives of frequency response functions along the longitudinal direction of a beam are used as the sensitive indicator of crack existence. Then, weighting function is employed in the averaging process in frequency domain to account for the modal participation of the differences between the dynamic behavior of a beam with a fatigue crack at the low excitation and one at the high excitation. Subsequently, a damage index is defined such that the location and level of the crack may be identified. It is shown from the analysis of vibration measurements in this study that comparison of frequency response characteristics of a beam with a single fatigue crack at different level of excitation forces enables an effective detection of the crack.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.77-84
• /
• 2002

Measurements of NO and NOx emission of laminar partially premixed LPG/air flames with and without acoustic excitation are reported. The NOx emission at the tailpipe of a combustion chamber is determined by chemiluminescent analyser. The NOx measurements are taken in flames with several different center tube equivalance ratio( ø$\sub$o/), and overall equivalace ratio(ø$\sub$o/) for a fixed fuel flowrate. The NOx emission decrease to reach a minimum value at an optimum ø$\sub$c/ 2. Theø$\sub$c/ 2 flame gives a compromise of thermal NO and prompt NO mechanism. In the case of excitation. the visual shape of the flame is changed from laminar flame to turbulent-like flame. With increasing levels of excitation amplitude, an optimum value of the NO and NOx emission exists. A shorter flame caused by the enhanced upstream mixing due to acoustic excitation results in the reduction of NO and NOx emission in the present flames. The reduction of flame length affects the shorter residence time of center tube mixture, and significantly influences the NOx reduction.