• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.18-26
• /
• 2007

The transport and removal characteristics of cobalt ions were investigated in a continuous electrodeionization with cation exchange textile (CEDI-CET). It was shown that the removal properties of cobalt ions are strongly dependent on the operating parameters such as temperature, flow velocity, and the solution pH. The transport and removal of cobalt ions was mainly related to the sorption on the surface and the convection and electro-migration through the ion exchange medium. In this study, the CEDI-CET showed good process performance for the removal of metal ions compared with the conventional CEDI with resins.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권6호
• /
• pp.584-592
• /
• 1996

Coupling optical modulator which on the $LiTaO_3$ substrate is fabricated by using proton exchange method and self-aligned method. Proton exchange of proton diffusion method was applied to pattern a waveguide on $LiTaO_3$ substrate. The annealing at >$400^{\circ}C$ was carded out to control waveguide width and depth. The depths of the two annealed optical waveguides, which were measured by using .alpha.-step, were 1.435 K.angs. and 1.380 K.angs. Using .alpha.-step facility, we examined that the width of waveguides is increased from 5.mu.m to 6.45 .mu.m and 6.3.mu.m due to the annealing effects. The process of proton exchange was done at 150.deg. C for 120 min, >$200^{\circ}C$ for 60 min and annealing process was done at >$400^{\circ}C$ for 90 min, >$400^{\circ}C$ for 60 min. The high speed coupling optical modulator has very good figures of merits; the measured high frequency power were achieved.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.208-211
• /
• 2003

Characteristics of biosorption of lead by marine algae, Laminaria japonica, were examined. The biosorption capacity of lead by L. japonica was achieved up to 30％ of its own weight and proportional to the initial lead concentration. However, the opposite result was shown in different initial weight of biomass. Ion exchange reaction between lead ions and calcium ions was observed on lead biosorption with Ca-Ioaded biomass. Stoichiometric coefficient, which can represent the exchange ratio between metal ions and protons during elution process, was determined as 1.39. Therefore, it was concluded that the reaction between lead ions already attached in biomass and protons in bulk solution was not fully stoichiometric ion exchange relation at elution process.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.1-11
• /
• 2007

본 연구는 NPK(질소-인-칼슘) 비료 생산을 위하여 강양이온 이온교환수지를 사용하는 모사이동층(SMB; simulated moving bed) 흡착 공정의 모델링과 모사에 관하여 다룬다. 이 공정은 생산부와 재생부로 크게 나뉘며, 원하지 않는 이온을 제외시키기 위한 2개의 세척 구역을 포함하여 6개의 구역으로 구성되어있다. 따라서 전통적인 4구역 모사이동층 공정보다 좀 더 복잡한 운전 조건을 갖는다. 이러한 6구역 모사이동층 공정의 모델링과 모사를 통하여 얻은 결과는 파일럿규모의 공정과 상용화 공정에서 얻은 실험 결과와 유사함을 보여주었다. 실험 결과로부터 확인된 이 모델식은 최적 운전 조건을 얻기 위한 최적화 문제에 적용될 수 있을 것이다.

• 멤브레인
• /
• 제30권2호
• /
• pp.79-96
• /
• 2020

환경오염과 화석연료의 문제로 인한 2차 에너지 변환 및 저장 장치의 개발이 활발하게 진행되고 있다. 이러한 에너지 변환장치들은 전기화학적 시스템을 기본으로 운영되고 있으며 이온교환막은 각 공정의 성능을 결정짓는 중요한 요소이다. 따라서 에너지 시스템의 효율 증대 및 성능 향상을 위해서는 적합한 물성을 갖는 이온교환막 개발이 필요하다. 이러한 이온교환막은 크게 양이온교환막, 음이온교환막, 바이폴라막으로 분류되고 있으며, 이들 막들은 화학적, 물리적, 형태학적 특성에 따라 다양한 용도을 갖고 있다. 본 총설에서는 이온교환막의 주요한 특징과 함께 이들의 제조 방법에 대해 기술했다. 이어서 이온교환막을 이용하여 최근 개발되고 있는 전기화학 시스템에 기반을 둔 역전기 투석, 레독스 흐름 전지, 수전해 공정에 대해서 소개하고, 각 에너지 공정에서 이온교환막이 갖는 역할과 조건에 대해서 설명하였다.

• 한국CDE학회논문집
• /
• 제9권2호
• /
• pp.175-182
• /
• 2004

As a bridge between design and manufacturing, process planning is to generate a sequenced set of instructions to manufacture the specified part. Automatic interpretation of manufacturing information incorporated in the design documentation such as CAD file has been a knotty subject for manufacturing engineers since no current data exchange format for product data provides a perfect interface between heterogeneous systems. The recent neutral data exchange format STEp, standard for the exchange of product model data, includes not only geometry but also technical and managerial information. STEP AP(Application Protocol) 224 is specifically dedicated to the mechanical product definition for process planning using machining features. Given a design information in STEP AP 224 format, process planning can be made without human intervention. This paper describes a method to determine the sequence of machining features by using the machining features and the manufacturing information expressed in STEP AP224.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.443-450
• /
• 1995

A directional coupler which on the X-cut $LiNbO_3$ substrate is fabricated by using proton exchange method and self-aligned method. After proton exchange process, the waveguide is formed by annealing process. The relation ship between refractive index change of waveguide and maximum output was studied along with the annealing time. A self-aligned method was used to simplify the fabrication process of the waveguide and to maximize the efficiency of electric field. The on-off state of modulator has been observered with the switching of the directional coupler by the electric field effect and also the switching voltage of the directional coupler has been measured with 8.0 [V].

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.279-288
• /
• 2017

Nowadays, nations cyber security capabilities play an important role in a nation's defense. Security-critical infrastructures such as national defenses, public services, and financial services are now exposed to Advanced Persistent Threats (APT) and their resistance to such attacks effects the nations stability. Currently Cyber Threat Intelligence (CTI) is widely used by organizations to mitigate and deter APT for its ability to proactively protect their assets by using evidence-based knowledge. The evidence-based knowledge information can be exchanged among organizations and used by the receiving party to strengthen their cyber security management. This paper will discuss on the business process reengineering of the CTI information exchange management for a nationwide scaled control and governance by the government to better protect their national information security assets.

• 산업공학
• /
• 제20권2호
• /
• pp.94-102
• /
• 2007

Portfolio management deals with decision making on 'when' and 'how' to revise an existing portfolio. In this paper, we show that a classical statistical process control (SPC) chart for normal data, a wellestablished tool in quality engineering, can effectively be used for signaling times for revising a portfolio. Noting that the day-to-day performance of a portfolio may be auto-correlated, we use the exponentially weighted moving average center-line chart to develop an automatic portfolio management procedure. The portfolio management procedure is extensively tested on historical data of equities traded in the Korea Exchange (KRX), the American Stock Exchange (AMEX), and the New York Stock Exchange (NYSE). In comparison with the performances of the KOSPI, XAX, and NYA indices during the same time periods, results from these experiments show that SPC chart-based portfolio revision presents itself a convenient and reliable method for optimally managing portfolios.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.477-484
• /
• 2014

In this paper, we propose a new optical secret key sharing method based on the Diffie-Hellman key exchange protocol required in cipher system. The proposed method is optically implemented by using a free-space interconnected optical logic gate technique in order to process XOR logic operations in parallel. Also, we present a compact type of optical module which can perform the modified Diffie-Hellman key exchange for a cryptographic system. Schematically, the proposed optical configuration has an advantage of producing an open public key and a shared secret key simultaneously. Another advantage is that our proposed key exchange system uses a similarity to double key encryption techniques to enhance security strength. This can provide a higher security cryptosystem than the conventional Diffie-Hellman key exchange protocol due to the complexity of the shared secret key. Results of numerical simulation are presented to verify the proposed method and show the effectiveness in the modified Diffie-Hellman key exchange system.