• Journal of Information Display
• /
• 제4권3호
• /
• pp.12-16
• /
• 2003

In connection with the ion exchange strengthening on soda-lime-silicate, substrate glass for display use was investigated. In the processing, the temperature was varied during the ion exchange in order to make stress profile and to determine optimum condition. In the present work, we found that the maximum value of strength was 617.8 MPa after an ion exchange process at 470 $^{\circ}C$ for 1h, and then, at 450 $^{\circ}C$ for 24h. Also, the effect of residual stress placed on the near surface was measured by analyzing the number of crack branches and brittleness. This approach allowed us the residual stress profile to be engineered to improve mechanical reliability.

• Industrial Engineering and Management Systems
• /
• 제6권1호
• /
• pp.55-63
• /
• 2007

Exchange of information is essential to the process of innovation such as product development. However, in many cases innovation fails because of a lack of knowledge sharing among parties concerned, even if parties individually have pieces of useful knowledge and skills. Besides physical factors like communication costs, the possibility of opportunistic behavior by parties like stealing ideas can discourage information exchange. This paper introduces a model to analyze incentives of information exchange. The model is a game by two players who alternately opt to offer information to the partner. It is suggested that information exchange can stop before reaching the efficient level. In order to attain the efficient information exchange, expectation of mutual benefit and absence of opportunistic motives in both players are needed. Methods for promoting information exchange include modifying payoff structure to meet the condition of information exchange. The fluidity of partnership may increase a variety of information exchange partners, but discourage building trust between partners which promotes information exchange.

• Journal of Magnetics
• /
• 제13권2호
• /
• pp.43-52
• /
• 2008

The objective of this paper is to review the magnetic and magneto-transport properties of Co/$Co_2TiSn$ consisting of two metallic magnetic phases that are antiferromagnetically exchange-coupled at the phase boundary. The bulk Co/$Co_2TiSn$ system, which has a $Co_2$TiSn Heusler alloy precipitates in the hexagonal Co matrix, showed an unusual coercivity change with a concurrent change in temperature, and was modeled on the basis of a wall formation caused by exchange coupling at the phase boundary. For measurements of magneto-transport properties, Co/$Co_2TiSn$ thin films that had two-magnet phases were deposited using a magnetron sputtering system with a composite target. The magnetization process in the films is also explained on the basis of the model of wall formation at the phase boundary. Annealed Co/$Co_2TiSn$ films showed a 0.12% GMR effect, indicating the scattering of polarized conduction electrons due to the antiparallel exchange coupling at the phase boundary. The scattering process of conduction electrons at the phase boundary was modeled with relation to the magnetization process.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 춘계 학술발표강연 및 논문개요집
• /
• pp.37-37
• /
• 2002

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.106-109
• /
• 1992

In this study, a single optical modulator which is fabricated on X-cut $LiNbO_3$ substrate by using proton exchange method is described. It is well-known that the proton exchange method is characterized by index change of the single optical modulator. As a results, it is found that the single optical waveguide varied widely with controlling diffusion process. The diffusion process was used to optimize the fabrication of the single optical modulator. On the other hand, the process was used to provide another performance improvement and it reduced the fabrication process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.104-112
• /
• 1994

The scavenging efficiency has a great influence on the performance of a diesel engine, especially slow two-stroke diesel engines which are usually used as a marine propulsion power plant. And this is greatly affected by the conditions in the cylinder, scavenging manifold and exhaust manifold during the gas exchange process. There are many factors to affect on the scavenging efficiency and these factors interact each other very complicatedly. Therefore the simulation program of the gas exchange process is very useful to improve and predict the scavenging efficiency, due to the high costs associated with redesign and testing. In this paper, a three-zone scavenging model for two-stroke uniflow engines was developed to link a control-volume-type engine simulation program for performance prediction of long-stroke marine engines. In this model it was attempted to simulate the three different regions perceived to exist inside the cylinder during scavenging, namely the air, mixing and combystion products regions, by modeling each region as a seperate control volume. Finally the scavenging efficiency was compared with three type of scavenging modes, that is, pure displacement, partial mixing and prefect mixing.

• 오토저널
• /
• 제13권2호
• /
• pp.67-87
• /
• 1991

The computer program which predicts the gas exchange process of multi-cylinder 4-Stroke cycle spark-ignition engine, can be great assistance for the design and development of new engine. In this study, the computer program was developed to predict the gas exchange process of multi-cylinder four stroke cycle spark ignition engine including intake and exhaust systems. When gas exchange process is to be calculated, the evaluation of the variation of the thermo-dynamic properties with time and position in the intake and exhaust systems is required. For the purpose, the application of the generalized method of characteristics to the gas exchange process is known as one of the method. The simulation model developed was investigated to the analysis of the branch system of multi-cylinder. The models used were the 2-zone expansion model and single zone model for in cylinder calculation and the generalized method of characteristic including area change, friction, heat transfer and entropy gradients for pipe flow calculation. The empirical constants reduced to least number as possible were determined through the comparison with the experimented indicator diagram of one particular operation condition and these constants were applied to other operating condition. The predicted pressures in cylinder were compared with the experimental results over the wide range of equivalence ratio and ignition timing. The predicted values have shown good agreement with the experimental results. The thermodynamic properties in the intake and exhaust system were predicted over the wide range of equivalence ratio and ignition timing. The obtained results can be summarized as follows. 1. Pressures in the exhaust manifold have a little influence on the equivalence ratio, a great influence on the ignition timing. 2. Pressures in the inlet manifold are nearly unchanged by the equivalence ratio and the ignition timing. 3. In this study, the behaviors of the exhaust temperature, gas in the exhaust manifold were ascertained.

• 한국환경과학회지
• /
• 제9권3호
• /
• pp.261-266
• /
• 2000

A kinetic study for nitrate removal by anion exchange resin was performed using continuous column reactors. Kinetic approach from the packed bed showed the reaction rate constant k$_1$ was 0.07~0.17 $\ell$/mgㆍhr and maximum exchange quantity q$_{o}$ was 27.75~31.81 mg/g. The results from the continuous column well agreed with that from the batch reactor. An economic analysis of the water treatment plant by anion exchange resin with a regenerating system was performed to design plant and process. Based on the treatment of 20 mg/$\ell$ nitrate-contained wastewater of 10,000 gallons per day to 2 mg/$\ell$, total capital cost and total annual cost are estimated to be 836 million wons and 211 million wons, respectively.y.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.791-800
• /
• 2021

Along with the trend of financial globalization, Vietnam has undergone a process of increasing financial integration. The great capital inflow poses a problem for the monetary policy's ability to follow a planned target during the changes in the global financial markets. This paper aims to examine the impact of financial integration on monetary policy independence in Vietnam and investigate the role of foreign exchange reserves on this relationship. The research borrows from Mundell-Fleming's Trilemma theory. The results show that increasing financial integration reduces the independence of monetary policy in the short term, and foreign exchange reserves have not shown an apparent role in Vietnam. In addition, increasing exchange rate stability has a negative impact on the independence of monetary policy, but it has an impact on growing market confidence and partly supporting the management process of monetary policy in the short term. Therefore, in the long run, Vietnam needs to allow exchange rate flexibility more, but there should not be sudden changes; the size of foreign exchange reserves should be strengthened to facilitate the implementation of an independent monetary policy with an obvious impact in the context of an increasing scale of international capital flows in the future.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.535-541
• /
• 2017

Ag 200 ppm과 총유량 120 l/h의 기준으로 이온 교환 섬유 시스템을 제작하였다. 이 시스템은 이온교환 섬유로서 강염기성인 FIVAN A-6을 이용하였고, 이온교환 섬유의 교환이 용이하고 고정틀이 필요 없도록 고안된 이중관 형 이온 교환 섬유조로 구성되어있다. 이 시스템의 이온교환섬유의 Ag에 대한 이온교환 용량은 4.6 meq/g 이었으며, 공정조건별로는 다음과 같은 결과를 얻었다. 흡착공정의 경우 유속의 영향을 확인한 후 40~90 l/h의 범위에서 운전하였으며, pH 7~12 범위에서는 Ag의 착이온 형성에 대한 pH의 영향이 없는 것으로 나타났다. 역세공정의 경우 60~120 l/h의 범위에서 Ag 회수율 실험을 수행하였으며, 역세용 화학물질로는 NaOH, $NH_4Cl$, NaCl을 이용하여 비교실험을 하였고, 역세 화학물질이 고농도 일수록 탈착시간은 짧아지지만 몰당 탈착 효율은 저하되는 경향이었으므로 탈착시간과 농도의 균형을 잘 맞추어 운전해야 경제적 운전이 될 수 있음을 확인하였다. 강염기성 음이온 섬유인 FIVAN A-6와 이중관형 이온교환 섬유조를 이용하여 Ag 흡착율은 99.5% 이상, 총 Ag회수율은 96% 이상의 결과를 얻을 수 있었으며 상용화 가능함을 확인할 수 있었다.