• 대한환경공학회지
• /
• 제33권2호
• /
• pp.113-119
• /
• 2011

오존을 이용한 잉여슬러지 감량화 시스템이 결합된 생물학적 처리 공정에서 잉여슬러지의 무배출에 따른 생물반응조내의 영향 및 처리수질을 검토하였다. 잉여슬러지 인발량 배수($SDN_{min}$)가 3인 조건에서 잉여슬러지의 pH를 4 이하로 전 처리한 후 오존주입율 0.03 g $O_3/g$ SS로 처리한 결과 잉여슬러지의 인발 없이 안정적인 생물학적 처리가 가능하였다. $OUR_{max}$ 실험 결과, 오존주입율 0.03 g $O_3/g$ SS의 조건에서 대부분의 슬러지는 미생물 활성이 없어지는 것으로 조사되었다. 잉여슬러지의 가용화에 따른 생물반응조내에서의 MLVSS/MLSS의 변화는 거의 없었고, 반응조내 미생물의 인 축적 현상도 관측되지 않았다. 잉여슬러지 가용화 후 생물학적 처리수의 유기물 및 SS의 농도 증가 현상은 관측되지 않았고, 생물반응조내의 질산화 및 탈질율 증가로 유출수중의 T-N 농도가 감소하는 효과를 나타내었다. T-P의 경우에는 잉여슬러지의 무배출로 인해 대부분이 제거되지 않고 유출수중에 함유되어 유출되는 것으로 조사되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1244-1250
• /
• 2014

The temperature of the main engine cabin of commercial vessel is very high. The material SS-316L undergoes creep damage at temperatures exceeding $450^{\circ}C$. It is essential to maintain the highly stressed engine cabin below the creep regime. Hence, seawater is employed in this kind of maritime vehicles as cooling liquid. It obtains the thermal energy at the cooling pipe line after passing through main engine cooling system. To harness the energy in the seawater, a turbine can be installed to absorb the energy in the seawater before being released into the sea. In this study, a cooling pipe line is selected to apply the tubular type hydro turbine for transferring the energy. Numerical analysis for investigating the performance and the internal flow characteristics of the tubular turbine is conducted. The results show that the maximum efficiency of 85.8% is achieved although the efficiency drops rapidly at partial flow rate condition. The efficiency descends slowly at the condition of excess flow rate. There is a relatively wide operating range of flow rate of this turbine to keep high efficiency at the excess flow rate condition. For the internal flow of the turbine, there is uniform streamline on the suction and pressure sides of the blade at the design point. However, the secondary flow appears at the suction and pressure sidesat the excess flow rate.In addition, it appears only at pressure side at the partial flow rate condition.

• 동의생리병리학회지
• /
• 제21권6호
• /
• pp.1670-1675
• /
• 2007

The pulse diagnosis studies reported to date has mainly been performed to clinically reveal the pulse wave characteristics according to the specific diseases, whereas no attempts have been made to study the effects on the pulse wave characteristics of the daily activities such as taking meals, exercise, and sleep, etc. This work reports the effect of feeding stimulus on the healthy subjects on the pulse wave pattern which has quantitatively been analyzed using the objective model for the pulse diagnosis in oriental medicine. The pulse waves right before/after the meal and 30 minutes after the meal were measured using the pulse analyzing equipment (3D-Mac, Daeyo Medi, Korea) and at the same time oriental medicine doctors' diagnoses were given. The pulse parameters obtained from the equipment and clinical records on the subjects were statistically processed and the variables showing statistically significant differences were analyzed. The results indicate that the pulse pressure, the pulse rate, and the respiratory rate increase while the blood pressure decreases after the meal. For the floating/sinking and the deficient/excess coefficients characterizing the pulse states described in the oriental medicine, the floating/sinking coefficients were observed to decrease whereas the deficiency/excess coefficients increase after the meal. The results indicates that besides the standard bio-indicators like blood pressure and respiratory rate, etc., the pulse wave characterization in terms of the pulse classifications in the oriental medicine using the floating/sinking, deficient/excess pulse states provide an important piece of biomedical information.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.692-700
• /
• 2018

In this study, the results of PBDEs and HBCDs of the products and waste that contain BFRs such as domestic electronic products, automobiles and textile products were compared with international management standards, and their excess rates were calculated. Deca-BDE was detected among the PBDEs in TV rear cover plastics, car seats, automotive interior plastics, and automobile shredding residues of products and waste containing BFRs. The comparison with Basel Convention management standards (1,000 mg/kg) for PBDE-containing wastes (4 types in total) shows that the excess rate of all samples was less than 1.5%. The estimated excess rate compared to the EU and Basel convention management standards (1,000 mg/kg) for PBDEs (4 species + deca-BDE) and TV rear cover plastics was 37.5% (30 of 80 samples exceeded the standards). The estimated excess rate compared to the Basel convention management standards (1,000 mg/kg) for HBCD, building materials products and waste was 15.7% (17 of 108 samples exceeded the standards). In the case of PBDEs, it is necessary to remove only the rear cover of CRT TV among the electric and electronic products and treat it in the flame retardant treatment facility to improve the recycling collection system. In the case of HBCD, it is necessary to appropriately dispose of the recycled materials, heat insulation materials, TV plastics, and styrofoam in marine fishery among construction materials and restrict the use as recycled raw materials.

• 대한한방내과학회지
• /
• 제40권4호
• /
• pp.582-596
• /
• 2019

Objective: The aims of this study were to analyze the deficiency-excess pattern identification (虛實辨證) and compare it to the sputum cytokines of asthma patients. Method: 50 asthma patients who met the inclusion and exclusion criteria were included in this study. They were divided into two groups: deficiency and excess syndrome groups. Sputum examinations were performed including $TNF-{\alpha}$, Interleukin (IL)-4, IL-5, IL-10, and IL-13. The Quality of Life Questionnaire for Adult Korean Asthmatics (QLQAKA), the Visual Analog Scale(VAS), and heart rate variability (HRV) were also measured. We also conducted laboratory tests, including the hematological indexes. Results: Based on the pattern identification, 50 asthma patients can be divided into two categories of groups: the deficiency syndrome group (N=24) and the excess syndrome group (N=26). In the analysis of sputum cytokines, although the $TNF-{\alpha}$, IL-4 and IL-13 were at a higher level in the deficient pattern group than in the excess pattern group, it was insignificantly different. There was a negative correlation in the analysis of QLQAKA and VAS. In the analysis of HRV, although the mean value of VLF, LF, and HF in the deficiency syndrome group was higher than in the excess syndrome group, it was insignificantly different. There was no significant difference in the hematological tests between the deficiency and the excess syndrome group. The mean value of the IgE in the blood tests was five times greater than the reference value. Conclusion: The cytokines of sputum including $TNF-{\alpha}$, IL-4, IL-5, IL-10, and IL-13 were indifferent statistically. Reinforcing the healthy and eliminating the pathogenic factors should be considered.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.312-333
• /
• 2006

This paper presents the results of an analysis of the excess porewater pressure distribution due to piezocone penetration in overconsolidated clays. From piezocone test results for moderately and heavily overconsolidated clays, it was observed that the excess porewater pressure increases monotonically from the piezocone surface to the outer boundary of the shear zone and then decreases logarithmically to the outer boundary of the plastic zone. It was also found that the size of the shear zone decreases from approximately 2.2 to 1.5 times the cone radius with increasing OCR, while the plastic radius is about 11 times the piezocone radius, regardless of the OCR. The equation developed in this study based on the modified Cam clay model and the cylindrical cavity expansion theory, which take into consideration the effects of the strain rate and stress anisotropy, provide a good prediction of the initial porewater pressure at the piezocone location. The method of predicting the spatial distribution of excess porewater pressure proposed in this study is based on a linearly increasing ${\Delta}u_{shear}$. In the shear zone and a logarithmically decreasing ${\Delta}u_{oct}$, and is verified by comparing with the excess porewater pressure measured in overconsolidated specimens at the calibration chamber.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.229-235
• /
• 2020

Investors aim to maximize the return rate for their own investment, utilizing various information as possible as they can access. However those investors, especially individual investors, have limitations of interpretation of the domain-specific information or even the acquisition of the information itself. Thus, individual investors tend to make decision affectively and frequently, which may cause a loss in returns. This study aims to analyze analysts' target price and to suggest the strategy that could maximize individual's return rate. Most previous literature revealed that the optimistic bias exists in the analysts' target price and it is also confirmed in this study. In this context, this study suggests the upper limit of target rate of returns and the optimal value named 'alpha(α)' which performs the adjustment of proposed target rate to maximize excess earning returns eventually. To achieve this goal, this study developed an optimization problem using linear programming. Specifically, when the analysts' proposed target rate exceeds 30%, it could be adjusted to the extent of 59% of its own target rate. As apply this strategy, the investors could achieve 1.2% of excess earning rate on average. The result of this study has significance in that the individual investors could utilize analysts' target price practically.

• 한국대기환경학회지
• /
• 제7권1호
• /
• pp.31-40
• /
• 1991

This study shows the correlation between $NO_x$ emission in the exhaust gas and various operation factors of dual fuel engine for Co-generation system. General tendency was shown that the thermal efficiency was lowered by the change of operation factors. However these were not confirmed on this experiment. Increasing T4 temperature (exhaust gas temperature at turbo-charger inlet) reduces $NO_x$ emission rate. The higher T4 temperature requires lower excess air as the excess air ratio is controlled by T4 temperature on gas mode operation. Another tendency was that $NO_x$ emission rate is reduced in case of increasing boost air temperature, quantity of pilot oil or bypassing flue gas through the exhaust gas boiler. The diameter of the fuel injection nozzle was changed smaller than design value and the injection timing was readjusted. Thus $NO_x$ emission rate could be reduced as retarding injection timing and changing hole diameter of fuel injection nozzle, however maxium engine out-put was decreased by changing fuel nozzle on the diesel mode operation.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.669-678
• /
• 2009

The reduction of excess activated sludge from petrochemical plant was investigated by the electro fenton (E-Fenton) process using electrogenerated hydroxyl radicals which lead to mineralization of activated sludge to $CO_2$, water and inorganic ions. Factors affecting the disintegration efficiency of excess activated sludge in E-Fenton process were examined in terms of five criteria: pH, $H_2O_2/Fe^{2+}$ molar ratio, current density, initial MLSS (mixed liquid suspended solids) concentration, $H_2O_2$ feeding mode. TSS total suspended solid and $TCOD_{cr}$ reduction rate increased with the increasing $H_2O_2/Fe^{2+}$ molar ratio and current density until 42 and $6.7 mA/cm^2$, respectively but further increase of $H_2O_2/Fe^{2+}$ molar ratio and current density would reduce the reduction rate. On the other hand, as expected, increasing pH and initial MLSS concentration of activated sludge decreas TSS and $TCOD_{cr}$ reduction rate. The E-Fenton process was gradually increased during first 30 minutes and then linearly proceed till 120 minutes. The optimal E-Fenton condition showed TSS reduction rate of 62~63% and $TCOD_{cr}$ (total chemical oxygen demand) reduction rate of 55~56%. Molar ratio $H_2O_2/Fe^{2+} = 42$ was determined as optimal E-Fenton condition with initial $Fe^{2+}$ dose of 5.4 mM and current density of $6.7{\sim}13.3 mA/cm^2$, initial MLSS of 7,600 mg/L and pH 2 were chosen as the most efficient E-Fenton condition.

• 한국항공우주학회지
• /
• 제32권7호
• /
• pp.60-68
• /
• 2004

고속으로 비행하는 물체가 다른 물체와 충돌하는 경우에는 극히 짧은 시간에 커다란 변형이 일어나게 된다. 고변형률 변형 (high-strain-rate deformation) 에서는 소성변형이 일어나면서 상당한 열을 발생시키고 재료의 온도를 상승시킨다. 온도의 상승은 재료의 동적인 물성에 많은 영향을 미치게 되므로, 변형 시의 온도상승을 예측하는 것은 매우 중요하다. 변형시의 온도상승은 주로 전위(dislocation)의 움직임과 공공(vacancy)으로 인한 재료내의 저장에너지와 밀접한 관계를 갖게되므로, 저장 에너지의 양을 파악하는 것은 매우 중요하다. 고변형률 변형시 전위가 빠르게 움직이면서 평형상태에서의 경우보다 많은 파공공 (excess vacancies) 을 발생시키게 된다. 본 논문에서는 과공공을 포함하는 미시적 재료 모텔을 구성하고 분자동역학 (molecular dynamics, MD) 기법을 사용하여 면십입방격자 (fcc) 구조를 가지는 재료 (구리)에 대한 저장 에너지를 계산하였다.