• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1433-1437
• /
• 2010

The deep excavation work in Korean downtown is almost excuted near by existing structures and utility lines because of the diminution of available yard for construction. So, it was required more and more that the accurate control of displacement on the earth retaining system for minimizing the popular complaint and the damage from constructional accident. Automatic monitoring system is adopted in fracture zone for real time monitoring. In addition, Face mapping is carried out on the face of fracture zone according to excavation sequence. As the result of automatic monitoring system and face mapping, we was able to take the necessary reinforcement and changing excavation method within suitable time. This paper is informed about a stability case on the deep rock excavation site with fracture zone in urban area by automatic monitoring system.

• Architectural research
• /
• 제8권2호
• /
• pp.43-48
• /
• 2006

The appropriate fleet estimation of the excavation equipment is a major factor in the determination of the cost and time requirements of a project. But the decision of what kind of equipment selected is often based on heuristic methods or trial and error in Korea. Thus, this study proposes a prototype model that uses genetic algorithms to select fleet estimation of loaders (backhoe) and trucks used in excavation work. To verify the applicability of this model, the case study was performed. And the result of the genetic model was compared with that of the trial & error method. The use of the genetic model suggested this study required 44days, 2 units of backhoes, 7 units of trucks, and a total cost of 171,839,756 won. With the estimated fleet number of equipment, the minimum cost of excavation work can be calculated, taking account of the time-cost trade-off. By utilizing this prototype model, the efficiency of excavation work can be improved.

• 한국지반공학회지:지반
• /
• 제12권5호
• /
• pp.27-40
• /
• 1996

박스 구조들은 상.하수도관, 통신 및 전기선로, 도로, 철도 등을 위한 여러가지 목적으로 오래 전부터 많이 사용되어 왔다. 도심지에서는 대부분 지반을 굴착하여 박스 구조물을 설치한 후에 되채움하는 과정을 거친다. 그러나 박스에 작용하는 토압을 위한 기존의 설계법에서는 굴착(또는 되채움)되는 단면의 형상을 고려하지 못하고 있다. 본 연구에서는 매설박스 설계시 굴착되는 단면형상을 고려할 수 있는 새로운 토압이론식을 제안하였다. 이 이론식에 의한 수평토압은 유한요소해석 결과와 비교적 좋은 일치를 보여 주었으나, 기존설계법에 의한 토압은 상당히 과대평가되었다. 박스의 상단면에 작용하는 연직응력의 이론값은 기존 설계법 및 유한요소해석 결과와 거의 유사하였다. 그러나 박스의 바닥면에 작용하는 반발응력은 기초지반의 탄성계수에 따라 크게 좌우되므로, 새로운 이론식은 기초지반이 느슨한 모래인 경우를 제외하면 직접 적용이 어려웠다. 한편, 유한요소해석에 의하면 박스에 작용하는 수평토압은 굴착면의 경사와 굴착저면의 폭에 따라 크게 좌우되었다.

• 한국지반공학회논문집
• /
• 제23권8호
• /
• pp.87-95
• /
• 2007

본 연구에서는 대심도 풍화대에 시공되는 2차로 도로터널을 기준으로 터널의 굴착방법과 지반보강그라우팅에 의한 지반변위 및 지반응력의 분석을 통하여 최적의 시공방안을 찾고자 하였다. 터널 직경은 약 12m를 적용하였으며, 상부 강관다단그라우팅 및 측벽 보강그라우팅을 적용하였다. 검토된 굴착방법은 링컷 굴착방법과 중벽분할 굴착방법이다. 터널 천단의 소성율과 연직응력비를 분석한 결과, 풍화대지반에 굴착되는 터널에서 토피고(H)가 터널직경(D)의 4배 이상일 경우(H>4D) 대심도 터널로 판단할 수 있었다. 해석결과 중벽분할 굴착방법이 링컷 굴착방법에 비하여 대심도 풍화대 NATM터널에서 안정성이 높은 굴착방법으로 판단할 수 있었다. 또한, 측벽 보강그라우팅 실시로 터널 내공변위 및 침하 발생을 억제할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.87-92
• /
• 2000

In excavation of tunnels especially located in shallow depth, it is not rare to meet geological change in excavation progress worse than expected in the initial design stage. This paper present a case study on the re-design of excavation and support system of a shallow tunnel under construction where it meets the unexpected bad geological condition during excavation. The detailed geological investigation shows that the rock mass is heavily weathered and fractured with RMR value less than 20. Considering this geological condition, the design concept is focused on the reinforcement of the ground preceding the excavation of tunnel. Two design patterns, LW-grouting & forepoling with pilot tunnelling method and the steel pipe reinforced grouting method, are suggested. Numerical analysis by FLAC shows that these two patterns give the tunnel and roof ground stable in excavation process while the original design causes severe failure zone around the tunnel and floor heaving. In point of the mechanical stability and the degree of construction, the steel pipe reinforced grouting technique proved to be good for the reinforcement of heavily fractured rock mass in tunnelling. This assessment and design process would be a guide in the construction of tunnels in heavily weathered and fractured rock mass situation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.521-532
• /
• 2008

Supporting system design and construction management for the soft and hard rock layers with fractured zones are very important theme for the safety of temporary retaining wall, surrounding ground and structures in the urban deep excavation for the construction of subway, railway, building etc. The prevailing design method of supporting system for the soft and hard rock layers in the deep excavation is mostly carrying out by simplification without proper consideration for the characteristic of rock discontinuities. Therefore the behaviors of rock discontinuities and fractured zones dominate the whole safety of excavation work in the real construction stage, serious disaster due to the failure of temporary retaining wall can be induced in the case of developing large deformations in the ground and large axial forces in the supporting system. This paper introduces examples of deep excavation where the soft and hard rock layers with fractured zones were designed to be supported by shotcrete and rock bolt, deformations of corresponding ground and supporting systems in the construction period and increments of axial force in the upper earth anchors and strut due to the these deformations were investigated through detailed analysis of measurement data, the results were so used for the management of consecutive construction that led to the safe and economical completion of excavation work. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.

• 지질공학
• /
• 제29권3호
• /
• pp.289-302
• /
• 2019

최근 굴착현장 인근의 지반함몰 발생사례가 증가함에 따라 사전에 지반함몰 가능성을 예측할 수 있는 연구가 진행되고 있다. 본 연구에서는 기존 연구에 의해 개발된 굴착 전 지반함몰 위험등급 평가 시트인 GSRp를 실제 굴착 현장에 적용하여 현장 적용성을 검증하였다. 각각 다른 지반조건을 가진 5개 굴착현장에 대하여 지반함몰 위험등급을 평가한 결과, GSRp 점수는 40~79점으로 산출되어 대부분 II등급(우수지반)~III등급(양호지반)으로 분류되었다. 평가방법의 신뢰성 검증을 위하여 계측결과에 의해 실측된 수평변위량과 비교 분석하였다. 본 연구현장의 수평변위량은 허용치의 25~47%로 나타나 지반함몰 위험이 낮게 평가된 GSRp 결과와 일치하였다. 향후 지반함몰 위험성이 높은 불량한 지반을 대상으로 하는 현장 적용에 대한 연구가 진행되어 검증과 보완이 이루어진다면 GSRp 평가방법이 굴착 전 지반함몰 위험도를 예측하는 평가 도구로 활용될 수 있을 것으로 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.105-112
• /
• 2001

The purpose of this study is to assess the stability of tunnel for a high speed railway crossing the fault zone. The area where the tunnel crossed the fault zone can be unstable during construction and operation. Geotechnical investigations have been conducted to determine an optimum excavation method by obtaining the material properties around the fault zone and to check the stability of the tunnel. For the numerical analysis, the FLAC, numerical analysis code based on finite difference method, was utilized to analyze the behavior of the fault at three points having typical ground conditions. Based on the results of numerical analysis, the combinations of compaction grouting and LW grouting were determined as suitable methods for pre-excavation Improvement of the ground surrounding the tunnel opening. In conclusion, the stability of the tunnel construction for the high speed railway within the fault zone may be obtained by adopting the optimum excavation method and the reinforcement method. The numerical analysis based on FLAC program contains errors caused by assumptions used in numerical analysis, therefore constant monitoring with respect to the change of ground condition and groundwater is highly recommended to minimize the numerical error and the possibility of damage to tunnel.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제5권1호
• /
• pp.40-45
• /
• 2002

The calculation of earthwork plays a major role in the planning and design phases of many civil engineering projects, such as seashore reclamation; thus, improving the accuracy of earthwork calculation has become very important. In this paper, we propose an algorithm for finding a cubic spline surface with the free boundary conditions, which interpolates the given three-dimensional data, by using B-spline and an accurate method to estimate pit-excavation volume. The proposed method should be of interest to surveyors, especially those concerned with accuracy of volume computations. The mathematical models of the conventional methods have a common drawback: the modeling curves form peak points at the joints. To avoid this drawback, the cubic spline polynomial is chosen as the mathematical model of the new method. In this paper, we propose an algorithm of finding a spline surface, which interpolates the given data, and an appropriate method to calculate the earthwork. We present some computational results that show the proposed method, of the Maple program, provides better accuracy than the method presented by Chen and Lin.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.248-259
• /
• 2010

In the case of relatively good ground and construction condition in the deep excavation for the construction of subway, railway, building etc., flexible earth retaining systems are often used in an economical point of view. It is generally known that the mechanism of behavior in the flexible earth retaining system is relatively more complicated than the rigid earth retaining system. Moreover in the case of long span strut supporting system the analysis of strut axial force change becomes more difficult when the differences of ground condition and excavation work progress on both sides of excavation section are added. When deeper excavation than the specification or installation delay of supporting system is done or change of ground condition is faced due to the construction conditions during construction process, lots of axial force can be induced in some struts and that can threaten the safety of construction. This paper introduces one example of long span deep excavation where struts and rock bolts were used as a supporting system with flexible wall structure. The characteristics of ground deformation and strut axial force change, the measured data obtained during construction process, were analysed, the effects of relatively deeper excavation than the specification on one excavation side and rapid drawdown of ground water level on the other excavation side were deeply investigated from the viewpoint of mutual influences between ground deformations of both excavation sides and strut axial force changes. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.