• 제목/요약/키워드: evaporation zone

검색결과 64건 처리시간 0.026초

포항지역 제3기층내 지하수와 지표수의 산성화 및 해수혼합, 그리고 액상화 유출수 기원에 관한 연구 (Groundwater and Stream Water Acidification and Mixing with Seawater, and Origin of Liquefaction-Expelled Water in a Tertiary Formation in the Pohang Area)

  • 정찬호;오송민;이유진;이용천;김영석;강태섭
    • 지질공학
    • /
    • 제32권4호
    • /
    • pp.559-569
    • /
    • 2022
  • 이 연구는 포항시 흥해지역 지하수, 하천수, 저수지의 해수 혼합과 산성화, 그리고 포항지진(2017년 11월 15일)으로 인한 액상화 유출수의 기원에 대해서 알아보았다. 연구지역은 제3기 퇴적암층 지질로 구성된다. 지하수 6점, 저수지 5점, 하천수 4점, 액상화 유출수 2점, 해수 1점의 시료를 채취하여 화학성분과 산소 및 수소 동위원소를 분석하였다. 연구지역 중심을 동서로 관통하는 곡강천은 서쪽에서 동해쪽으로 흐른다. 하천 하부지역의 지하수와 저수지는 pH 4 이하의 산성수로 황산염이 부화된 Ca(Mg)-SO4의 수질화학적 유형을 보인다. 제 3기 지층에서 확인되는 황철석의 산화에 의해 기원한 것으로 보이는 Al, Mn, Fe 성분이 특징적으로 높은 농도를 보인다. 하천 상부지역은 하천을 따라서 유입된 염수가 혼합되어 지하수는 Ca(Na)-HCO3(Cl) 유형의 화학적 특성을 보인다. 𝛿D와 𝛿18O 동위원소 분석 결과 모든 물은 GMWL을 따라서 분포하며, 저수지는 증발작용으로 부화된 특성을 보인다. 화학성분과 동위원소 조성으로 볼 때 액상화 유출수 2점은 충적층으로 확산된 인접한 하천수, 그리고 염수화가 일부 진행된 심부와 천부 지하수가 용출된 것으로 보인다.

암반 공동 열에너지저장소 주변 암반의 수리적 조건에 따른 열-수리-역학적 연계거동 분석 (Effects of Hydrological Condition on the Coupled Thermal-Hydrological-Mechanical Behavior of Rock Mass Surrounding Cavern Thermal Energy Storage)

  • 박정욱;;이항복;류동우;신중호;박의섭
    • 터널과지하공간
    • /
    • 제25권2호
    • /
    • pp.168-185
    • /
    • 2015
  • 본 연구에서는 천부의 암반 공동에 대용량 고온의 열에너지를 저장하는 경우 주변 암반에 야기되는 열-수리-역학적 연계거동을 살펴보고, 이에 지하수위와 암반 투수계수 등 수리적 조건이 미치는 영향을 검토하였다. 해석대상을 투수계수가 비교적 낮은 수준($10^{-17}m^2$)인 결정질 암반으로 가정할 때 열에너지 저장으로 인한 암반 거동에 지하수가 미치는 영향은 크지 않을 것으로 예측되었다. 저장 공동이 지하수위 하부에 위치하는 경우의 온도, 주응력, 변위 분포 등은 저장공동이 불포화대에 위치하는 경우와 거의 동일하게 나타났다. 암반내 열전달 특성은 암반의 투수계수에 매우 큰 영향을 받는 것으로 나타났다. 암반의 투수계수를 $10^{-15}m^2$ 이하로 가정한 경우 열전달은 주로 암반에 전도에 의한 것으로 판단할 수 있었으나, 투수계수를 $10^{-12}m^2$으로 가정하는 경우 지하수 대류에 의한 상향 열유동이 뚜렷이 관찰되었다. 암반 투수계수의 크기에 따라 열수의 대류나 비등으로 인한 상변화 등 복합적인 유동 특성을 나타났으며, 온도, 압력, 포화도 분포가 상이하게 발달하였다.

A Verification Study on the Temperature reduction Effect of Water Mist Injection

  • Kim, Jeong-Ho;Lee, Myung-Hun;Yoon, Yong-Han
    • KIEAE Journal
    • /
    • 제15권3호
    • /
    • pp.5-14
    • /
    • 2015
  • Purpose: Recently, according to climate changes, human health is exposed to danger over the world and they influence all fields of human society. Due to these climate changes, humans can be exposed to more frequent and extreme scorching heat and cold wave than the present. As precautions against these urban higher temperature and dryness, diverse methods are being sought. Among them, as measures to form cold islands, the evaporative cooling effect realistic to social and economic conditions was examined. Method: This study was conducted to analyze effects of temperature reduction and cooling according to injection quantity of minute water particles by using a blast sprayer as one of alternatives of alleviation of urban climate changes in outside space in summer. For this, through temperature difference in accordance with the injection quantity per hour of a day, a time zone representing the value of the highest temperature change was analyzed. Also, by analyzing temperature difference according to the injection quantity per daytime insolation, relation of amounts of insolation and evaporation was investigated. Temperature difference in accordance with distances at the highest temperature with the highest value in temperature changes was analyzed. Result: At the study result, about temperature, as injection quantity increase, temperature reduction was significant statistically at the highest temperature with the most insolation. A factor with the highest influence was judged to be the increase of the injection quantity. According to the injection quantity, it was predicted that $3.1^{\circ}C$ temperature reduction of a daily average in case of 0.16L/min, $3.5^{\circ}C$ temperature reduction of a daily average in case of 0.32L/min, and $4.4^{\circ}C$ temperature reduction of a daily average in case of 0.48L/min.

연속 성장법으로 성장된 Mn-Zn Ferrite 단결정 특성 및 결함 (Properties and defects of Mn-Zn Ferrite single crystals grown by the modified process)

  • 정재우;오근호
    • 한국결정성장학회지
    • /
    • 제1권2호
    • /
    • pp.23-33
    • /
    • 1991
  • Mn-Zn Ferrite는 단결정을 성장하기 위하여 용융하는 동안 불균질 용융과 ZnO휘발의 고유특성을 갖는 재료이다. 그 결과로, 결정성장축을 따라 양이온의 분포가 불균일 하게 된고 또한 기존의 Bridgman법에서는 도가니내에서 용융대가 장시간 유지됨으로써 백금입자가 결정안으로 침입하게된다. 이들은 훼라이트의 자기적 성질을 저하시키는 성질을 갖고 있다. 그러나 새로운 성장법에서는 이러한 단점들을 극복하고 양질의 단결정을 얻기 위하여 결정성장 인자들의 관계를 고찰하였으며 그 인자들은 다음과 같다 : 도가니내의 melt 높이, melt의 표면장력과 밀도, 계면에서의 melt거동, 도가니와 고액계면의 형상, 원료공급속도, 결정성장속도. 아울러, 성장된 결정의 조성을 분석하였을 때 초기조성과 비교하여 $\textrm{Fe}_2\textrm{O}_3$ 1.5 mol%, MnO, Zn 2.0 mol% 이내로 조성 변동은 각각 억제되었고 성장결정면 (110)에서 화확적인 etching 법을 이용하여 광학현미경을 통해 결정내부등을 관찰하였으며, 자기적 특성등을 측정하였다.

  • PDF

나선코일의 열전달 특성에 관한 연구 (A Study on Heat Transfer Characteristics of Helical Coiled Tube)

  • 박종운;조동현
    • 수산해양교육연구
    • /
    • 제16권2호
    • /
    • pp.257-270
    • /
    • 2004
  • The two-phase closed thermosyphon is a heat transfer device capable of transfer large quantities of heat from a source to a sink by taking advantage of the high heat transfer rates associated with the evaporation and condensation of a working fluid within the device. A study was carried out with the performance of the heat transfer of the thermosyphon having 50, 60, 70, 80, 90 internal micro grooves in which boiling and condensation occur. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphon is also tested for comparison. Water, methanol and ethanol have been used as the working fluids. The liquid filling as the ratio of working fluid volume to total volume of thermosyphon, the inclination angle, micro grooves and operating temperature have been used as the experimental parameters. The heat flux and the boiling and the condensation heat transfer coefficient and overall heat transfer coefficient at the condenser and evaporator zone are estimated from the experimental results. The experimental results have been assessed and compared with existing correlations. Imura's and Kusuda's correlation for boiling showed in good agreement with experimental results within ${\pm}20$% in plain thermosyphon. The maximum heat transfer rate was obtained when the liquid fill ratio was about 25%. The high heat transfer coefficient was found between 25o and 30o of inclination angle for water and between 20o and 25o for methanol and ethanol. The relatively high rates of heat transfer have been achieved in the thermosyphon with internal micro grooves. The micro grooved thermosyphon having 60 grooves shows the best heat transfer coefficient in both condensation and boiling. The maximum enhancement (i.e. the ratio of the heat transfer coefficients of the micro grooved thermosyphon to plain thermosyphon) is 2.5 for condensation and 2.3 for boiling.

한강 수계 분지내 하천수의 산소, 수소 안정동위원소 조성 (Oxygen and Hydrogen Isotopic Compositions of Stream Waters in the Han River Basin)

  • 김규한;이세희
    • 자원환경지질
    • /
    • 제35권2호
    • /
    • pp.113-120
    • /
    • 2002
  • 한강 수계분지내의 하천수의 산소 및 수소 동위원소 조성은 $\delta$D=6.6delta$$^{18}$ O-7.4,로 순환수선($\delta$D=8$\delta$$^{18}$ O+10)과 차이를 나타내고 있다. 이는 한강수계 분지내의 지역적 기상조건과 증발 영향 때문으로 해석된다. 한강 하천수의 5150과 5D 값은 각각 -8.2~-10p77(평균 -9.17f7)과 -60~-96%e(평균 -69f77)이다. 그리고 남한강 하턴수치 평균$\delta$$^{18}$ O 와$^{18}$ O값은 -9.3$\textperthousand$과 -69$\textperthousand$로 북한강 하천수의 -9.2$\textperthousand$와 -69$\textperthousand$값보다 무거운 산소와 수소 동위원소비가 결핍되어 있다. 이는 남한강 하천수에 탄산염 기원과 황화광물 기원의 황산염의 무거운 산소의 유입과 위도 효과를 받고 있음에도 불구하고 집수지의 고도 효과의 영향을 더 많이 받기 때문으로 해석된다. 등위원소 자료에서 계산된 한강본류에서의 남한강과 북한강 하천수의 혼합비율은 약 6 : 4로 남한강 하천수의 영향이 한강 본류 하천수에 크게 영향을 주고 있다.

Ni-Al-$ZrH_2$ 연료극을 사용한 용융탄산염 연료전지의 온도의 영향 (Effect of operating temperature using Ni-Al-$ZrH_2$ anode in molten carbonate fuel cell)

  • 서동호;장성철;윤성필;남석우;오인환;임태훈;홍성안;한종희
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.134-134
    • /
    • 2010
  • Fuel cell is a device that directly converts chemical energy in the form of a fuel into electrical energy by way of an electrochemical reaction. In the anode for a high temperature fuel cell, nickel or nickel alloy has been used in consideration of the cost, oxidation catalystic ability of hydrogen which is used as fuel, electron conductivity, and high temperature stability in reducing atmosphere. Most MCFC stacks currently operate at an average temperature of $650^{\circ}C$. There is some gains with decreased temperature in MCFC to diminish the electrolyte loss from evaporation and the material corrosion, which could improve the MCFC life. However, operating temperature has a strong related on a number of electrode reaction rates and ohmic losses. Baker et al. reported the effect of temperature (575 to $650^{\circ}C$). The rates of cell voltage loss were 1.4mV/$^{\circ}C$ for a reduction in temperature from 650 to $600^{\circ}C$, and 2.16mV/$^{\circ}C$ for a decrease from 600 to $575^{\circ}C$. The two major contributors responsible for the change in cell voltage with reducing operation temperature are the ohmic polarization and electrode polarization. It appears that in the temperature range of 550 to $650^{\circ}C$, about 1/3 of the total change in cell voltage with decreasing temperature is due to an increase in ohmic polarization, and the electrode polarization at the anode and cathode. In addition, the oxidation reaction of hydrogen on an ordinary nickel alloy anode in MCFC is generally considered to take place in the three phase zone, but anyway the area contributing to this reaction is limited. Therefore, in order to maintain a high performance of the fuel cell, it is necessary to keep this reaction responsible area as wide as possible, that is, it is needed to keep the porosity and specific surface area of the anode at a high level. In this study effective anodes are prepared for low temperature MCFC capable of enhancing the cell performance by using zirconium hydride at least in part of anode material.

  • PDF

지리산국립공원 아고산대 침엽수 고사개체 공간정보 구축 및 입지환경 분석 - 반야봉, 영신봉, 천왕봉 일원 구상나무를 중심으로- (A Study on the Spatial Information and Location Environment of Dead Coniferous Tree in Subalpine Zone in Jirisan National Park -Focus on Korean Fir(Abies koreana) in Banyabong, Yeongsinbong, Cheonwangbong-)

  • 박홍철;문건수;이호;이나연
    • 한국환경생태학회지
    • /
    • 제34권1호
    • /
    • pp.42-54
    • /
    • 2020
  • 지리산국립공원 내 자생하는 아고산대 침엽수(구상나무 등)의 주요 분포지를 대상으로 약 10년 전·후의 고해상도 항공영상을 활용해 고사목 증가량, 확산패턴 등을 분석하고자 하였다. 나아가 침엽수 고사목이 위치한 지점의 해발고도, 지형정보, 일사량, 수분환경 등을 분석하여 고사에 영향을 미칠 것으로 판단되는 입지요인을 파악하였다. 지리산국립공원 반야봉, 영신봉, 천왕봉 지역 모두 최근 10여 년간 아고산대 침엽수 고사목 개체수가 2~5배 증가한 것으로 나타났다. 반야봉은 약 2배, 영신봉은 약 3.9배, 천왕봉은 약 5.2배 증가한 것으로 나타나 천왕봉 지역의 증가세가 비교적 빠른 것으로 확인되었다. 높은 경사도로 토양수분함량이 낮고, 남향에 위치하여 높은 일사량으로 증발산량이 많은 건조 환경, 이에 더해 태양광에 의한 강한 일사량 및 강우의 체류시간이 짧아 토양이 건조할 것으로 추정되는 입지환경에 고사목이 주로 분포하는 것으로 판단된다. 즉, 건조한 입지환경에서 아고산대 침엽수 고사가 집중되고 있는 것으로 판단되며, 10여 년 전과 비교해도 동일한 경향이 이어지고 있는 것으로 판단된다.

기상자료 분석을 통한 대관령 지역의 작물 최저 한계온도일 추정 (Agro-climate Characteristics and Stability in Crop Production of Daegwallyeong Area in Korea)

  • 류종수;이정태;이계준;오동식
    • 한국토양비료학회지
    • /
    • 제45권6호
    • /
    • pp.1153-1156
    • /
    • 2012
  • 대관령 지역의 과거 38년간 (1972-2009)의 기상자료를 수집하여 최저한계온도를 추정하였다. 최저한계온도 출현 빈도 추정은 Gumbel의 극한치 확률분포이론을 도입하여 기온자료의 확률분포함수를 도출하여 이루어졌다. 그 결과 저온 출현일 빈도는 작물의 생산안정성과 밀접한 관계가 있기 때문에 조사하였으며, 저온 출현일이 앞당겨질수록 작물을 일찍 심어 안정된 생육을 유지할 수 있어 그 만큼 수량을 높일 수 있을 것으로 판단되었다. 대관령 지역에서 한계 저온 $5^{\circ}C$ 이상이 5일 이상 지속되는 날짜를 보면 4월 3일, 4월 10일, 4월 20일, 4월 28일, 5월 8일로 나타났으며, 한계저온이 나타나는 시기가 앞으로 당겨질수록 그 시기 (한계저온 $5^{\circ}C$ 출현일)가 출현할 확률이 작아지고 재현되는 기간이 길어져, 작물을 재배할 기회가 줄어들어 작물 파종 및 정식이 어렵게 된다. 따라서 재현기간을 순서대로 보면 50, 25, 10, 5, 2년 이었다. 기온 $5^{\circ}C$에 적응하는 저온성 작물 (배추, 샐러리, 토마토, 딸기 등)은 5월 8일 이후에 파종 또는 정식하면 대관령 지역에서 안정된 수량을 얻을 수 있을 것으로 판단되었다.

소성변형 정도를 고려한 시간전개에 따른 노면상태 변화 분석 (Analyses on the Impact of Plastic Deformation on Change of the Road Surface Condition)

  • 손영태;박상현
    • 대한교통학회지
    • /
    • 제36권3호
    • /
    • pp.216-228
    • /
    • 2018
  • 본 연구는 도로 소성변형이 존재하는 구간의 기상악화시 안전성을 제고하기 위하여, 도로 소성변형자료와 기상자료, 교통량 자료를 통해 소성변형구간의 물고임 변화를 분석하였으며 이와 더불어 시간전개별 일조율 자료를 적용하여 물고임 구간의 노면상태 변화를 분석하였다. 실제 구국도 3호선 성남-장호원 구간 중 8.3km 구간의 소성변형 데이터를 수집하고 설계도면 자료의 수치 변환을 통하여 3차원 지형표면을 생성한 후 동일좌표체계의 도로선형자료를 반영하여 3차원 도로 모델링을 생성하고 보다 사실적인 도로를 묘사하기 위해 도로 위 음영이 발생할수 있는 시설물을 추가 설계하였다. 또한 본 구간의 일조율 분석을 위해 태양의 고도 및 방위각을 계산하여 설정하였으며 1시간 간격의 음영데이터를 취득하여 시간전개별 음영정도를 고려할 수 있었으며 이를 도로 증발량 산정식에 대입하여 시간전개에 따른 물고임 변화를 보다 현실적으로 파악하였다.