• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.1-10
• /
• 2000

This work shows that it is possible to obtain information about more than one parameter from acoustic field information. A variety of ultrasonic Lamb wave modes were utilized to reconstruct thickness and density of an isotropic plate. An image reconstruction of one parameter (thickness of a plate) was carried out for four cases, i.e., the lowest symmetrical and anti symmetrical modes, and the fastest symmetrical and anti symmetrical Lamb waves among multiple modes. For two parameter reconstructions (thickness and density), the image processing was performed using the lowest symmetrical and antisymmetrical modes simultaneously. In this work, a modified version of algebraic reconstruction technique (ART), which is a form of finite-series expansion method, was employed to reconstruct the ultrasonically computed tomographic images. Results from several sample geometries are presented.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권4호
• /
• pp.297-301
• /
• 2005

In this paper, we propose a method to estimate camera motion parameter based on invariant point features. Typically, feature information of image has drawbacks, it is variable to camera viewpoint, and therefore information quantity increases after time. The LM(Levenberg-Marquardt) method using nonlinear minimum square evaluation for camera extrinsic parameter estimation also has a weak point, which has different iteration number for approaching the minimal point according to the initial values and convergence time increases if the process run into a local minimum. In order to complement these shortfalls, we, first propose constructing feature models using invariant vector of geometry. Secondly, we propose a two-stage calculation method to improve accuracy and convergence by using homography and LM method. In the experiment, we compare and analyze the proposed method with existing method to demonstrate the superiority of the proposed algorithms.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.203-209
• /
• 2011

This study develops three new models that are practically applicable to three stages of Taguchi's robust design, which includes system design, parameter design and tolerance design. In system design, the Multiple Loss Function Analysis(MLFA) and Overall Loss Index(OLI) which reflect upon weight of characteristics and importance of specification are developed. Moreover parameter design presents Process Capability Index(PCI), $C_{PUK}$ and $C_{PLK}$, in order to segregate Signal-To-Noise Ratio(SNR) into accuracy and precision for an evaluation of relative comparison. In addition, tolerance design presents the new model of allowance computation for assembled product which is primarily derived from safety margin(SM) considering functional limit and specification. The guideline of those three new models, which include systematic charts and applicable illustrations, offers convenience for practitioners in the field. Hence, the practical applications could be made with the steps of robust designs such as system design, parameter design and specification allowance design.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.448-448
• /
• 2018

In this study, the regression models (Load ESTimator and eight-parameter model) were evaluated to estimate instantaneous pollutant loads under various criteria and optimization methods. As shown in the results, LOADEST commonly used in interpolating pollutant loads could not necessarily provide the best results with the automatic selected regression model. It is inferred that the various regression models in LOADEST need to be considered to find the best solution based on the characteristics of watersheds applied. The recently developed eight-parameter model integrated with Genetic Algorithm (GA) and Gradient Descent Method (GDM) were also compared with LOADEST indicating that the eight-parameter model performed better than LOADEST, but it showed different behaviors in calibration and validation. The eight-parameter model with GDM could reproduce the nitrogen loads properly outside of calibration period (validation). Furthermore, the accuracy and precision of model estimations were evaluated using various criteria (e.g., $R^2$ and gradient and constant of linear regression line). The results showed higher precisions with the $R^2$ values closed to 1.0 in LOADEST and better accuracy with the constants (in linear regression line) closed to 0.0 in the eight-parameter model with GDM. In hence, based on these finding we recommend that users need to evaluate the regression models under various criteria and calibration methods to provide the more accurate and precise results for pollutant load estimations.

• 대한원격탐사학회지
• /
• 제34권6_3호
• /
• pp.1427-1443
• /
• 2018

객체 기반 영상 분석은 영상의 복잡도를 낮추는 동시에 영상의 특성을 유지한다는 점에서 픽셀 기반 영상 분석보다 높은 효율성과 정보 활용 가능성을 지닌다. Superpixel은 일반적인 영상 분할보다 작은 영상 단위로 영상을 과분할함으로써 영상 내의 경계를 보다 잘 유지할 수 있다. 이 가운데 SLIC(Simple linear iterative clustering) superpixel 기법은 기존의 기법들보다 높은 품질의 영상 분할 결과를 제시하는 것으로 알려져 있다. 이러한 SLIC 기법의 입력 파라미터인 superpixel의 개수는 영상 분할 결과에 큰 영향을 미침에도 이에 대한 연구는 선행 연구에서 충분히 다루어지지 않았다. 이에 본 연구에서는 KOMPSAT 영상을 이용하여 변화 탐지 활용 연구를 위한 SLIC 계열 superpixel 기법의 최적 파라미터 분석 및 변화 탐지 성능 비교를 수행하였다. 사용된 superpixel 기법은 SLIC, SLIC0(SLIC의 무변수 버전), SNIC(Simple non-iterative clustering) 의 세 가지 기법으로, $5{\times}5$(픽셀)에서 $50{\times}50$(픽셀)의 superpixel 크기 범위에 대해서 superpixel 개수를 지정하여 superpixel 분할 영상을 생성하고 변화 탐지 참조 영상에 대한 재현율을 분석하였다. 이를 통해 얻어진 최적 superpixel 크기를 바탕으로 변화를 탐지하고자 하는 두 영상의 차 영상을 분할한 후 일정 크기의 객체로 clustering하였다. 두 시기(bi-temporal) 영상으로부터 얻어진 공통된 영상경계는 전후 영상에 각각 적용함으로써 각 superpixel의 feature(Lab 색상 차이) 변화를 탐지하였다. 최종적인 변화 탐지 결과는 참조 영상을 통해 그 성능이 분석하였으며, 영상의 과분할 정도가 높지 않더라도 규칙적인 크기와 형태의 superpixel을 통해 높은 변화 탐지 성능을 달성할 수 있음을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제10권6호
• /
• pp.177-186
• /
• 2005

본 논문에서는 DEM(Digital Elevation Model)과 산 영상을 매핑하여 3차원 정보를 생성하고 이를 이용한 비전기반 카메라 위치인식방법을 제안한다. 일반적으로 인식에 사용된 영상의 특징들은 카메라뷰에 따라 내용이 변해 정보양이 증가하는 단점이 있다. 본 논문에서는 카메라뷰에 무관한 기하학의 불변특징을 추출하고 제안하는 유사도 평가함수와 Graham 탐색방법을 사용한 정확한 대응점을 산출하여 카메라 외부인수를 계산하였다. 또한 그래픽이론과 시각적 단서를 이용한 3차원 정보생성 방법을 제안하였다. 제안하는 방법은 불변 점 특징 추출단계, 3차원 정보 생성단계, 외부인수 산출단계의 3단계로 구성된다. 실험에서는 제안한 방법과 기존방법을 비교, 분석함으로써 제안한 방법의 우월성을 입증하였다.

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.29-37
• /
• 1996

High speed engines with high power are increasingly on demands and almost engines employ crankshafts Such problems as bending and torsional vibrations become the point at issue in crankshaft analysis and design. In this study to overcome the diffiiculty with the large amount of computation in finite element vibration analysis of a crankshaft, a reduction method based on influence coefficient and lumped parameter is presented. which reduces the computation amount effectively and can be used in vibrational analysis and design of any types of crankshafts Crank journal and pinparts are meodelled as elements with 6degrees of freedom per node. Crank web part is modelled using equivalent mass and stiffness matices . based up on lumped parameter and influence coefficient respectively to reduce total degrees of freedom considerablely. To confirm the scheme of the study the results are compared with the known data and they are coincident. Also a simple crankshaft is designed and manufactured for experiments. The calculated results using reduction method and the experimental results agree well The scheme of this study can be utilized in evaluation results agree well. The calculated result are compared with the known data and they are coincident. Also a simple crankshaft is designed and manufactured for experiments. The calculated results using reduction method and the experimental results agree well. The scheme of this study can be utilized in evaluation and development of high speed engine.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.92-99
• /
• 2002

Safety-related motor operated valve(MOV) safety significance for Ulchin Unit 3 was categorized. The safety evaluation of MOV of domestic nuclear power plants affects the generic data used for the quantification of MOV common cause failure(CCF) events in Ulchin Units 3&4 PSA. Therefore, in this paper, MGL(multiple greek letter)parameter ${\beta}$, used for the evaluation of MOV CCF probabilities in Ulchin Units 3&4 probabilistic safety assessment(PSA), was re-estimated and the MOV safety significance was categorized. The re-estimation results of MGL parameter show that the value of(is decreased by 30% compared with the current value used in Ulchin Unit 3&4 PSA. The categorization results of MOV safety significance using the changed value of MGL parameter(show that the number of HSSCs(high safety significant components) is decreased by 54.5% compared with those using the current value of it used in Ulchin Units 3&4 PSA.

• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.147-154
• /
• 2002

The objective of this paper is to develop a nondestructive method for estimating the fracture toughness (K$\_$IC/) of CrMoV steels used as the rotor material of steam turbines in power plants. To achieve this objective, a number of CrMoV steel samples were heat-treated, and the fracture appearance transition temperature (FATT) was determined as a function of aging time. Nonlinear ultrasonics was employed as the theoretical basis to explain the harmonic generation in a damaged material, and the nonlinearity parameter of the second harmonic wave was the experimental measure used to be correlated to the fracture toughness of the rotor steel. The nondestructive procedure for estimating the 7c consists of two steps. First, the correlations between the nonlinearity parameter and the FATT are sought. The FATT values are then used to estimate K$\_$IC/, using the K$\_$IC/ versus excess temperature (i.e., T-FATT) correlation that is available in the literature for CrMoV rotor steel.

• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.121-129
• /
• 2016

As the lifespan of concrete structures increases, their load carrying capacity decreases owing to cyclic loads and long-term effects such as creep and shrinkage. For these reasons, there is a necessity for stress state monitoring of concrete members. Particularly, it is necessary to evaluate the concrete structures for behavioral changes by using a technique that can overcome the measuring limitations of usual ultrasonic nondestructive evaluation methods. This paper proposes the use of a nonlinear ultrasonic method, namely, nonlinear resonant ultrasonic spectroscopy (NRUS) for the measurement of nonlinearity parameters for stress monitoring. An experiment compared the use of NRUS method and a linear ultrasonic method, namely, ultrasonic pulse velocity (UPV) to study the effects of continuously increasing loads and cyclic loads on the nonlinearity parameter. Both NRUS and UPV methods found a similar direct relationship between load level and that parameter. The NRUS method showed a higher sensitivity to micro-structural changes of concrete than UPV method. Thus, the experiment confirms the possibility of using the nonlinear ultrasonic method for stress state monitoring of concrete members.